Skip to content

Commit

Permalink
[boards] Add WBR3 board
Browse files Browse the repository at this point in the history
  • Loading branch information
@kuba2k2
kuba2k2 committed Oct 28, 2023
1 parent 085b5ae commit d41d328
Show file tree
Hide file tree
Showing 5 changed files with 349 additions and 0 deletions.
60 changes: 60 additions & 0 deletions boards/_base/pcb/wbr3-test.json
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,60 @@
{
"pcb": {
"scale": 10,
"test_pads": {
"TA_15": "wbr3.back.a_15.anchor",
"TA_0": "wbr3.back.a_0.anchor",
"TA_1": "wbr3.back.a_1.anchor"
},
"back": [
{
"type": "rect",
"pos": "5.8,14.6",
"size": "3.6,3.6",
"preset": "copper1"
},
{
"id": "a_15",
"name": "label_line_up",
"pos": "2.4,11.5",
"vars": {
"DIR": "left",
"W": 0,
"H": 0
}
},
{
"name": "test_pad_1mm",
"pos": "3.2,11.4"
},
{
"id": "a_0",
"name": "label_line_up",
"pos": "11.6,17.6",
"vars": {
"DIR": "left",
"W": 0.7,
"H": 0
}
},
{
"name": "test_pad_1mm",
"pos": "12.4,17.5"
},
{
"id": "a_1",
"name": "label_line_up",
"pos": "10.9,19.6",
"vars": {
"DIR": "left",
"W": 0,
"H": 0
}
},
{
"name": "test_pad_1mm",
"pos": "11.7,19.5"
}
]
}
}
85 changes: 85 additions & 0 deletions boards/_base/pcb/wbr3.json
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,85 @@
{
"pcb": {
"templates": [
"esp12s",
"tuya-16x24",
"rf-type1",
"pcb-blue-light"
],
"pinout_hidden": "I2S,WAKE,SD,JTAG,SWD,FLASH,TRIG,CTS,RTS",
"pinout": {
"1": {
"NC": null
},
"2": {
"IC": 21,
"ARD": "D0"
},
"3": {
"IC": 14
},
"4": {
"IC": 25,
"ARD": "D1"
},
"5": {
"IC": 18,
"ARD": "D2"
},
"6": {
"IC": 19,
"ARD": "D3"
},
"7": {
"IC": 20,
"ARD": "D4"
},
"8": {
"PWR": 3.3
},
"9": {
"GND": null
},
"10": {
"IC": 26,
"ARD": "D5"
},
"11": {
"IC": 37,
"ARD": "D6"
},
"12": {
"IC": 38,
"ARD": "D7"
},
"13": {
"IC": 39,
"ARD": "D8"
},
"14": {
"IC": 40,
"ARD": "D9"
},
"15": {
"IC": 33,
"ARD": "D10"
},
"16": {
"IC": 34,
"ARD": "D11"
},
"TA_15": {
"IC": 36,
"ARD": "D12"
},
"TA_0": {
"IC": 15,
"ARD": "D13"
},
"TA_1": {
"IC": 16,
"ARD": "D14"
}
}
}
}
60 changes: 60 additions & 0 deletions boards/variants/wbr3.c
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,60 @@
/* This file was auto-generated from wbr3.json using boardgen */

#include <Arduino.h>

#ifdef LT_VARIANT_INCLUDE
#include LT_VARIANT_INCLUDE
#endif

// clang-format off
PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
// D0: PA07, ^FCS, SPI0_CS
{PIN_A7, PIN_GPIO | PIN_IRQ | PIN_SPI, PIN_NONE, 0},
// D1: PA11, FD0, UART0_TX, I2C0_SCL, PWM0
{PIN_A11, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_UART, PIN_NONE, 0},
// D2: PA02, TDO, UART1_RX, SPI0_CS, I2C0_SCL, PWM2
{PIN_A2, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_JTAG | PIN_SPI | PIN_UART, PIN_NONE, 0},
// D3: PA03, TDI, UART1_TX, SPI0_SCK, I2C0_SDA, PWM3
{PIN_A3, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_JTAG | PIN_SPI | PIN_UART, PIN_NONE, 0},
// D4: PA04, tRST, UART1_CTS, SPI0_MOSI, PWM4
{PIN_A4, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_JTAG | PIN_SPI | PIN_UART, PIN_NONE, 0},
// D5: PA12, FD3, UART0_RX, I2C0_SDA, PWM1
{PIN_A12, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_UART, PIN_NONE, 0},
// D6: PA16, SD_D3, SPI0_SCK, UART2_TX, I2C0_SDA, PWM4
{PIN_A16, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_SPI | PIN_UART, PIN_NONE, 0},
// D7: PA17, SD_CMD, PWM5
{PIN_A17, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0},
// D8: PA18, SD_CLK, PWM6
{PIN_A18, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0},
// D9: PA19, SD_D0, SPI0_MOSI, UART2_CTS, I2C0_SCL, PWM7
{PIN_A19, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_SPI | PIN_UART, PIN_NONE, 0},
// D10: PA13, UART0_RX, PWM7
{PIN_A13, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_UART, PIN_NONE, 0},
// D11: PA14, SD_INT, UART0_TX, PWM2
{PIN_A14, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_UART, PIN_NONE, 0},
// D12: PA15, SD_D2, SPI0_CS, UART2_RX, I2C0_SCL, PWM3
{PIN_A15, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_SPI | PIN_UART, PIN_NONE, 0},
// D13: PA00, TCK, UART1_RX, PWM0, SWCLK
{PIN_A0, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_JTAG | PIN_SWD | PIN_UART, PIN_NONE, 0},
// D14: PA01, TMS, UART1_TX, PWM1, SWDIO
{PIN_A1, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_JTAG | PIN_SWD | PIN_UART, PIN_NONE, 0},
};

PinInfo *lt_arduino_pin_gpio_map[] = {
[0] = &(lt_arduino_pin_info_list[13]), // PIN_A0 (D13)
[1] = &(lt_arduino_pin_info_list[14]), // PIN_A1 (D14)
[2] = &(lt_arduino_pin_info_list[2]), // PIN_A2 (D2)
[3] = &(lt_arduino_pin_info_list[3]), // PIN_A3 (D3)
[4] = &(lt_arduino_pin_info_list[4]), // PIN_A4 (D4)
[7] = &(lt_arduino_pin_info_list[0]), // PIN_A7 (D0)
[11] = &(lt_arduino_pin_info_list[1]), // PIN_A11 (D1)
[12] = &(lt_arduino_pin_info_list[5]), // PIN_A12 (D5)
[13] = &(lt_arduino_pin_info_list[10]), // PIN_A13 (D10)
[14] = &(lt_arduino_pin_info_list[11]), // PIN_A14 (D11)
[15] = &(lt_arduino_pin_info_list[12]), // PIN_A15 (D12)
[16] = &(lt_arduino_pin_info_list[6]), // PIN_A16 (D6)
[17] = &(lt_arduino_pin_info_list[7]), // PIN_A17 (D7)
[18] = &(lt_arduino_pin_info_list[8]), // PIN_A18 (D8)
[19] = &(lt_arduino_pin_info_list[9]), // PIN_A19 (D9)
};
// clang-format on
119 changes: 119 additions & 0 deletions boards/variants/wbr3.h
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,119 @@
/* This file was auto-generated from wbr3.json using boardgen */

#pragma once

// clang-format off

// Pins
// ----
#define PINS_COUNT 15 // Total GPIO count
#define NUM_DIGITAL_PINS 15 // Digital inputs/outputs
#define NUM_ANALOG_INPUTS 0 // ADC inputs
#define NUM_ANALOG_OUTPUTS 14 // PWM & DAC outputs
#define PINS_GPIO_MAX 19 // Last usable GPIO number

// Wire Interfaces
// ---------------
#define PIN_WIRE0_SCL_0 11u // PIN_A11
#define PIN_WIRE0_SCL_1 2u // PIN_A2
#define PIN_WIRE0_SCL_2 19u // PIN_A19
#define PIN_WIRE0_SCL_3 15u // PIN_A15
#define PIN_WIRE0_SDA_0 3u // PIN_A3
#define PIN_WIRE0_SDA_1 12u // PIN_A12
#define PIN_WIRE0_SDA_2 16u // PIN_A16
#define PINS_WIRE0_SCL (pin_size_t[]){11u, 2u, 19u, 15u}
#define PINS_WIRE0_SDA (pin_size_t[]){3u, 12u, 16u}

// Serial ports
// ------------
#define PIN_SERIAL0_RX_0 12u // PIN_A12
#define PIN_SERIAL0_RX_1 13u // PIN_A13
#define PIN_SERIAL0_TX_0 11u // PIN_A11
#define PIN_SERIAL0_TX_1 14u // PIN_A14
#define PIN_SERIAL1_CTS 4u // PIN_A4
#define PIN_SERIAL1_RX_0 2u // PIN_A2
#define PIN_SERIAL1_RX_1 0u // PIN_A0
#define PIN_SERIAL1_TX_0 3u // PIN_A3
#define PIN_SERIAL1_TX_1 1u // PIN_A1
#define PIN_SERIAL2_CTS 19u // PIN_A19
#define PIN_SERIAL2_RX 15u // PIN_A15
#define PIN_SERIAL2_TX 16u // PIN_A16
#define PINS_SERIAL0_RX (pin_size_t[]){12u, 13u}
#define PINS_SERIAL0_TX (pin_size_t[]){11u, 14u}
#define PINS_SERIAL1_CTS (pin_size_t[]){4u}
#define PINS_SERIAL1_RX (pin_size_t[]){2u, 0u}
#define PINS_SERIAL1_TX (pin_size_t[]){3u, 1u}
#define PINS_SERIAL2_CTS (pin_size_t[]){19u}
#define PINS_SERIAL2_RX (pin_size_t[]){15u}
#define PINS_SERIAL2_TX (pin_size_t[]){16u}

// Pin function macros
// -------------------
#define PIN_CS0 15u // PIN_A15
#define PIN_CTS1 4u // PIN_A4
#define PIN_CTS2 19u // PIN_A19
#define PIN_PA00 0u // PIN_A0
#define PIN_PA01 1u // PIN_A1
#define PIN_PA02 2u // PIN_A2
#define PIN_PA03 3u // PIN_A3
#define PIN_PA04 4u // PIN_A4
#define PIN_PA07 7u // PIN_A7
#define PIN_PA11 11u // PIN_A11
#define PIN_PA12 12u // PIN_A12
#define PIN_PA13 13u // PIN_A13
#define PIN_PA14 14u // PIN_A14
#define PIN_PA15 15u // PIN_A15
#define PIN_PA16 16u // PIN_A16
#define PIN_PA17 17u // PIN_A17
#define PIN_PA18 18u // PIN_A18
#define PIN_PA19 19u // PIN_A19
#define PIN_PWM5 17u // PIN_A17
#define PIN_PWM6 18u // PIN_A18
#define PIN_RX2 15u // PIN_A15
#define PIN_SDA0 16u // PIN_A16
#define PIN_TX2 16u // PIN_A16

// Port availability
// -----------------
#define HAS_SERIAL0 1
#define HAS_SERIAL1 1
#define HAS_SERIAL2 1
#define HAS_WIRE0 1
#define SERIAL_INTERFACES_COUNT 3
#define WIRE_INTERFACES_COUNT 1

// Arduino pin names
// -----------------
#define PIN_D0 7u // PIN_A7
#define PIN_D1 11u // PIN_A11
#define PIN_D2 2u // PIN_A2
#define PIN_D3 3u // PIN_A3
#define PIN_D4 4u // PIN_A4
#define PIN_D5 12u // PIN_A12
#define PIN_D6 16u // PIN_A16
#define PIN_D7 17u // PIN_A17
#define PIN_D8 18u // PIN_A18
#define PIN_D9 19u // PIN_A19
#define PIN_D10 13u // PIN_A13
#define PIN_D11 14u // PIN_A14
#define PIN_D12 15u // PIN_A15
#define PIN_D13 0u // PIN_A0
#define PIN_D14 1u // PIN_A1

// Static pin names
// ----------------
static const unsigned char D0 = PIN_D0;
static const unsigned char D1 = PIN_D1;
static const unsigned char D2 = PIN_D2;
static const unsigned char D3 = PIN_D3;
static const unsigned char D4 = PIN_D4;
static const unsigned char D5 = PIN_D5;
static const unsigned char D6 = PIN_D6;
static const unsigned char D7 = PIN_D7;
static const unsigned char D8 = PIN_D8;
static const unsigned char D9 = PIN_D9;
static const unsigned char D10 = PIN_D10;
static const unsigned char D11 = PIN_D11;
static const unsigned char D12 = PIN_D12;
static const unsigned char D13 = PIN_D13;
static const unsigned char D14 = PIN_D14;
25 changes: 25 additions & 0 deletions boards/wbr3.json
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,25 @@
{
"_base": [
"realtek-ambz2",
"realtek-ambz2-8720",
"realtek-ambz2-tuya",
"realtek-ambz2-image",
"realtek-ambz2-2mb-900k",
"ic/rtl8720cf",
"pcb/wbr3",
"pcb/wbr3-test"
],
"build": {
"mcu": "rtl8720cf",
"variant": "wbr3"
},
"name": "WBR3 Wi-Fi Module",
"url": "https://developer.tuya.com/en/docs/iot/wbr3-module-datasheet?id=K9dujs2k5nriy",
"vendor": "Tuya Inc.",
"doc": {
"fccid": "2ANDL-WBR3"
},
"pcb": {
"symbol": "WBR3"
}
}

0 comments on commit d41d328

Please sign in to comment.