peer: add new abstract message router

In this commit, we add a new abstract message router. Over time, the
goal is that this message router replaces the logic we currently have in
the readHandler (the giant switch for each message).

With this new abstraction, can reduce the responsibilities of the
readHandler to *just* reading messages off the wire and handing them off
to the msg router. The readHandler no longer needs to know *where* the
messages should go, or how they should be dispatched.

This will be used in tandem with the new `protofsm` module in an
upcoming PR implementing the new rbf-coop close.

peer/msg_router.go

@@ -0,0 +1,300 @@
+package peer
+
+import (
+	"fmt"
+	"maps"
+	"sync"
+
+	"github.com/lightningnetwork/lnd/fn"
+	"github.com/lightningnetwork/lnd/lnwire"
+)
+
+var (
+	// ErrDuplicateEndpoint is returned when an endpoint is registered with
+	// a name that already exists.
+	ErrDuplicateEndpoint = fmt.Errorf("endpoint already registered")
+
+	// ErrUnableToRouteMsg is returned when a message is unable to be
+	// routed to any endpoints.
+	ErrUnableToRouteMsg = fmt.Errorf("unable to route message")
+)
+
+// EndPointName is the name of a given endpoint. This MUST be unique across all
+// registered endpoints.
+type EndPointName = string
+
+// MsgEndpoint is an interface that represents a message endpoint, or the
+// sub-system that will handle processing an incoming wire message.
+type MsgEndpoint interface {
+	// Name returns the name of this endpoint. This MUST be unique across
+	// all registered endpoints.
+	Name() EndPointName
+
+	// CanHandle returns true if the target message can be routed to this
+	// endpoint.
+	CanHandle(msg lnwire.Message) bool
+
+	// SendMessage handles the target message, and returns true if the
+	// message was able to be processed.
+	SendMessage(msg lnwire.Message) bool
+}
+
+// MsgRouter is an interface that represents a message router, which is generic
+// sub-system capable of routing any incoming wire message to a set of
+// registered endpoints.
+//
+// TODO(roasbeef): move to diff sub-system?
+type MsgRouter interface {
+	// RegisterEndpoint registers a new endpoint with the router. If a
+	// duplicate endpoint exists, an error is returned.
+	RegisterEndpoint(MsgEndpoint) error
+
+	// UnregisterEndpoint unregisters the target endpoint from the router.
+	UnregisterEndpoint(EndPointName) error
+
+	// RouteMsg attempts to route the target message to a registered
+	// endpoint. If ANY endpoint could handle the message, then nil is
+	// returned. Otherwise, ErrUnableToRouteMsg is returned.
+	RouteMsg(lnwire.Message) error
+
+	// Start starts the peer message router.
+	Start()
+
+	// Stop stops the peer message router.
+	Stop()
+}
+
+// queryMsg is a message sent into the main event loop to query or modify the
+// internal state.
+type queryMsg[Q any, R any] struct {
+	query Q
+
+	respChan chan fn.Either[R, error]
+}
+
+// sendQuery sends a query to the main event loop, and returns the response.
+func sendQuery[Q any, R any](sendChan chan queryMsg[Q, R], queryArg Q,
+	quit chan struct{}) fn.Either[R, error] {
+
+	query := queryMsg[Q, R]{
+		query:    queryArg,
+		respChan: make(chan fn.Either[R, error], 1),
+	}
+
+	if !fn.SendOrQuit(sendChan, query, quit) {
+		return fn.NewRight[R](fmt.Errorf("router shutting down"))
+	}
+
+	resp, err := fn.RecvResp(query.respChan, nil, quit)
+	if err != nil {
+		return fn.NewRight[R](err)
+	}
+
+	return resp
+}
+
+// sendQueryErr is a helper function based on sendQuery that can be used when
+// the query only needs an error response.
+func sendQueryErr[Q any](sendChan chan queryMsg[Q, error], queryArg Q,
+	quitChan chan struct{}) error {
+
+	var err error
+	resp := sendQuery(sendChan, queryArg, quitChan)
+	resp.WhenRight(func(e error) {
+		err = e
+	})
+	resp.WhenLeft(func(e error) {
+		err = e
+	})
+
+	return err
+}
+
+// EndpointsMap is a map of all registered endpoints.
+type EndpointsMap map[EndPointName]MsgEndpoint
+
+// MultiMsgRouter is a type of message router that is capable of routing new
+// incoming messages, permitting a message to be routed to multiple registered
+// endpoints.
+type MultiMsgRouter struct {
+	startOnce sync.Once
+	stopOnce  sync.Once
+
+	// registerChan is the channel that all new endpoints will be sent to.
+	registerChan chan queryMsg[MsgEndpoint, error]
+
+	// unregisterChan is the channel that all endpoints that are to be
+	// removed are sent to.
+	unregisterChan chan queryMsg[EndPointName, error]
+
+	// msgChan is the channel that all messages will be sent to for
+	// processing.
+	msgChan chan queryMsg[lnwire.Message, error]
+
+	// endpointsQueries is a channel that all queries to the endpoints map
+	// will be sent to.
+	endpointQueries chan queryMsg[MsgEndpoint, EndpointsMap]
+
+	wg   sync.WaitGroup
+	quit chan struct{}
+}
+
+// NewMultiMsgRouter creates a new instance of a peer message router.
+func NewMultiMsgRouter() *MultiMsgRouter {
+	return &MultiMsgRouter{
+		registerChan:    make(chan queryMsg[MsgEndpoint, error]),
+		unregisterChan:  make(chan queryMsg[EndPointName, error]),
+		msgChan:         make(chan queryMsg[lnwire.Message, error]),
+		endpointQueries: make(chan queryMsg[MsgEndpoint, EndpointsMap]),
+		quit:            make(chan struct{}),
+	}
+}
+
+// Start starts the peer message router.
+func (p *MultiMsgRouter) Start() {
+	peerLog.Infof("Starting MsgRouter")
+
+	p.startOnce.Do(func() {
+		p.wg.Add(1)
+		go p.msgRouter()
+	})
+}
+
+// Stop stops the peer message router.
+func (p *MultiMsgRouter) Stop() {
+	peerLog.Infof("Stopping MsgRouter")
+
+	p.stopOnce.Do(func() {
+		close(p.quit)
+		p.wg.Wait()
+	})
+}
+
+// RegisterEndpoint registers a new endpoint with the router. If a duplicate
+// endpoint exists, an error is returned.
+func (p *MultiMsgRouter) RegisterEndpoint(endpoint MsgEndpoint) error {
+	return sendQueryErr(p.registerChan, endpoint, p.quit)
+}
+
+// UnregisterEndpoint unregisters the target endpoint from the router.
+func (p *MultiMsgRouter) UnregisterEndpoint(name EndPointName) error {
+	return sendQueryErr(p.unregisterChan, name, p.quit)
+}
+
+// RouteMsg attempts to route the target message to a registered endpoint. If
+// ANY endpoint could handle the message, then true is
+// returned.
+func (p *MultiMsgRouter) RouteMsg(msg lnwire.Message) error {
+	return sendQueryErr(p.msgChan, msg, p.quit)
+}
+
+// Endpoints returns a list of all registered endpoints.
+func (p *MultiMsgRouter) Endpoints() EndpointsMap {
+	resp := sendQuery(p.endpointQueries, nil, p.quit)
+
+	var endpoints EndpointsMap
+	resp.WhenLeft(func(e EndpointsMap) {
+		endpoints = e
+	})
+
+	return endpoints
+}
+
+// msgRouter is the main goroutine that handles all incoming messages.
+func (p *MultiMsgRouter) msgRouter() {
+	defer p.wg.Done()
+
+	// endpoints is a map of all registered endpoints.
+	endpoints := make(map[EndPointName]MsgEndpoint)
+
+	for {
+		select {
+		// A new endpoint was just sent in, so we'll add it to our set
+		// of registered endpoints.
+		case newEndpointMsg := <-p.registerChan:
+			endpoint := newEndpointMsg.query
+
+			peerLog.Infof("MsgRouter: registering new "+
+				"MsgEndpoint(%s)", endpoint.Name())
+
+			// If this endpoint already exists, then we'll return
+			// an error as we require unique names.
+			if _, ok := endpoints[endpoint.Name()]; ok {
+				peerLog.Errorf("MsgRouter: rejecting duplicate "+
+					"endpoint: %v", endpoint.Name())
+
+				newEndpointMsg.respChan <- fn.NewRight[error](
+					ErrDuplicateEndpoint,
+				)
+
+				continue
+			}
+
+			endpoints[endpoint.Name()] = endpoint
+
+			// TODO(roasbeef): put in method?
+			newEndpointMsg.respChan <- fn.NewRight[error, error](
+				nil,
+			)
+
+		// A request to unregister an endpoint was just sent in, so
+		// we'll attempt to remove it.
+		case endpointName := <-p.unregisterChan:
+			delete(endpoints, endpointName.query)
+
+			peerLog.Infof("MsgRouter: unregistering "+
+				"MsgEndpoint(%s)", endpointName.query)
+
+			endpointName.respChan <- fn.NewRight[error, error](
+				nil,
+			)
+
+		// A new message was just sent in. We'll attempt to route it to
+		// all the endpoints that can handle it.
+		case msgQuery := <-p.msgChan:
+			msg := msgQuery.query
+
+			// Loop through all the endpoints and send the message
+			// to those that can handle it the message.
+			var couldSend bool
+			for _, endpoint := range endpoints {
+				if endpoint.CanHandle(msg) {
+					peerLog.Tracef("MsgRouter: sending "+
+						"msg %T to endpoint %s", msg,
+						endpoint.Name())
+
+					sent := endpoint.SendMessage(msg)
+					couldSend = couldSend || sent
+				}
+			}
+
+			var err error
+			if !couldSend {
+				peerLog.Tracef("MsgRouter: unable to route "+
+					"msg %T", msg)
+
+				err = ErrUnableToRouteMsg
+			}
+
+			msgQuery.respChan <- fn.NewRight[error](err)
+
+		// A query for the endpoint state just came in, we'll send back
+		// a copy of our current state.
+		case endpointQuery := <-p.endpointQueries:
+			endpointsCopy := make(EndpointsMap, len(endpoints))
+			maps.Copy(endpointsCopy, endpoints)
+
+			//nolint:lll
+			endpointQuery.respChan <- fn.NewLeft[EndpointsMap, error](
+				endpointsCopy,
+			)
+
+		case <-p.quit:
+			return
+		}
+	}
+}
+
+// A compile time check to ensure MultiMsgRouter implements the MsgRouter
+// interface.
+var _ MsgRouter = (*MultiMsgRouter)(nil)