Curve curve intersection tylers

src/common.rs

@@ -43,6 +43,16 @@ impl FloatExt<f32> for f32 {
     }
 }
 
+/// Order two things into minimum and maximum
+#[inline]
+pub fn min_max<T: PartialOrd>(a: T, b: T) -> (T, T) {
+    if a < b {
+        (a, b)
+    } else {
+        (b, a)
+    }
+}
+
 /// Find real roots of cubic equation.
 ///
 /// The implementation is not (yet) fully robust, but it does handle the case

src/cubicbez.rs

@@ -6,11 +6,12 @@ use crate::MAX_EXTREMA;
 use crate::{Line, QuadSpline, Vec2};
 use arrayvec::ArrayVec;
 
-use crate::common::solve_quadratic;
 use crate::common::GAUSS_LEGENDRE_COEFFS_9;
+use crate::common::{min_max, solve_cubic, solve_quadratic};
 use crate::{
-    Affine, Nearest, ParamCurve, ParamCurveArclen, ParamCurveArea, ParamCurveCurvature,
-    ParamCurveDeriv, ParamCurveExtrema, ParamCurveNearest, PathEl, Point, QuadBez, Rect, Shape,
+    Affine, Nearest, ParamCurve, ParamCurveArclen, ParamCurveArea, ParamCurveBezierClipping,
+    ParamCurveCurvature, ParamCurveDeriv, ParamCurveExtrema, ParamCurveNearest, PathEl, Point,
+    QuadBez, Rect, Shape,
 };
 
 const MAX_SPLINE_SPLIT: usize = 100;
@@ -305,6 +306,13 @@ impl CubicBez {
     pub fn is_nan(&self) -> bool {
         self.p0.is_nan() || self.p1.is_nan() || self.p2.is_nan() || self.p3.is_nan()
     }
+
+    /// Is this cubic Bezier curve a line?
+    #[inline]
+    fn is_linear(&self, accuracy: f64) -> bool {
+        self.baseline().nearest(self.p1, accuracy).distance_sq <= accuracy
+            && self.baseline().nearest(self.p2, accuracy).distance_sq <= accuracy
+    }
 }
 
 /// An iterator for cubic beziers.
@@ -527,6 +535,101 @@ impl ParamCurveExtrema for CubicBez {
     }
 }
 
+// Note that the line is unbounded here!
+fn signed_distance_from_ray_to_point(l: &Line, p: Point) -> f64 {
+    let vec2 = l.p1 - l.p0;
+    let a = -vec2.y;
+    let b = vec2.x;
+    let c = -(a * l.start().x + b * l.start().y);
+    a * p.x + b * p.y + c
+}
+
+impl ParamCurveBezierClipping for CubicBez {
+    fn solve_t_for_x(&self, x: f64) -> ArrayVec<[f64; 3]> {
+        if self.is_linear(f64::EPSILON) && (self.p0.x - self.p3.x).abs() < f64::EPSILON {
+            return ArrayVec::new();
+        }
+        let (a, b, c, d) = self.parameters();
+        solve_cubic(d.x - x, c.x, b.x, a.x)
+            .iter()
+            .copied()
+            .filter(|&t| (0.0..=1.0).contains(&t))
+            .collect()
+    }
+    fn solve_t_for_y(&self, y: f64) -> ArrayVec<[f64; 3]> {
+        if self.is_linear(f64::EPSILON) && (self.p0.y - self.p3.y).abs() < f64::EPSILON {
+            return ArrayVec::new();
+        }
+
+        let (a, b, c, d) = self.parameters();
+        solve_cubic(d.y - y, c.y, b.y, a.y)
+            .iter()
+            .copied()
+            .filter(|&t| (0.0..=1.0).contains(&t))
+            .collect()
+    }
+
+    fn fat_line_min_max(&self) -> (f64, f64) {
+        let baseline = self.baseline();
+        let (d1, d2) = min_max(
+            signed_distance_from_ray_to_point(&baseline, self.p1),
+            signed_distance_from_ray_to_point(&baseline, self.p2),
+        );
+        let factor = if (d1 * d2) > 0.0 {
+            3.0 / 4.0
+        } else {
+            4.0 / 9.0
+        };
+
+        let d_min = factor * f64::min(d1, 0.0);
+        let d_max = factor * f64::max(d2, 0.0);
+
+        (d_min, d_max)
+    }
+
+    fn convex_hull_from_line(&self, l: &Line) -> (Vec<Point>, Vec<Point>) {
+        let d0 = signed_distance_from_ray_to_point(l, self.start());
+        let d1 = signed_distance_from_ray_to_point(l, self.p1);
+        let d2 = signed_distance_from_ray_to_point(l, self.p2);
+        let d3 = signed_distance_from_ray_to_point(l, self.end());
+
+        let p0 = Point::new(0.0, d0);
+        let p1 = Point::new(1.0 / 3.0, d1);
+        let p2 = Point::new(2.0 / 3.0, d2);
+        let p3 = Point::new(1.0, d3);
+        // Compute the vertical signed distance of p1 and p2 from [p0, p3].
+        let dist1 = d1 - (2.0 * d0 + d3) / 3.0;
+        let dist2 = d2 - (d0 + 2.0 * d3) / 3.0;
+
+        // Compute the hull assuming p1 is on top - we'll switch later if needed.
+        let mut hull = if dist1 * dist2 < 0.0 {
+            // p1 and p2 lie on opposite sides of [p0, p3], so the hull is a quadrilateral:
+            (vec![p0, p1, p3], vec![p0, p2, p3])
+        } else {
+            // p1 and p2 lie on the same side of [p0, p3]. The hull can be a triangle or a
+            // quadrilateral, and [p0, p3] is part of the hull. The hull is a triangle if the vertical
+            // distance of one of the middle points p1, p2 is <= half the vertical distance of the
+            // other middle point.
+            let dist1 = dist1.abs();
+            let dist2 = dist2.abs();
+            if dist1 >= 2.0 * dist2 {
+                (vec![p0, p1, p3], vec![p0, p3])
+            } else if dist2 >= 2.0 * dist1 {
+                (vec![p0, p2, p3], vec![p0, p3])
+            } else {
+                (vec![p0, p1, p2, p3], vec![p0, p3])
+            }
+        };
+
+        // Flip the hull if needed:
+        if dist1 < 0.0 || (dist1 == 0.0 && dist2 < 0.0) {
+            hull = (hull.1, hull.0);
+        }
+
+        hull
+    }
+}
+
 impl Mul<CubicBez> for Affine {
     type Output = CubicBez;
 
@@ -594,6 +697,7 @@ mod tests {
         cubics_to_quadratic_splines, Affine, CubicBez, Nearest, ParamCurve, ParamCurveArclen,
         ParamCurveArea, ParamCurveDeriv, ParamCurveExtrema, ParamCurveNearest, Point, QuadBez,
     };
+    use arrayvec::{Array, ArrayVec};
 
     #[test]
     fn cubicbez_deriv() {
@@ -873,4 +977,28 @@ mod tests {
             converted[0].points()[2].distance(Point::new(88639.0 / 90.0, 52584.0 / 90.0)) < 0.0001
         );
     }
+
+    use crate::param_curve::ParamCurveBezierClipping;
+    #[test]
+    fn solve_t_for_xy() {
+        fn verify<T: Array<Item = f64>>(mut roots: ArrayVec<T>, expected: &[f64]) {
+            assert_eq!(expected.len(), roots.len());
+            let epsilon = 1e-6;
+            roots.sort_by(|a, b| a.partial_cmp(b).unwrap());
+
+            for i in 0..expected.len() {
+                assert!((roots[i] - expected[i]).abs() < epsilon);
+            }
+        }
+
+        let curve = CubicBez::new((0.0, 0.0), (0.0, 8.0), (10.0, 8.0), (10.0, 0.0));
+        verify(curve.solve_t_for_x(5.0), &[0.5]);
+        verify(curve.solve_t_for_y(6.0), &[0.5]);
+
+        {
+            let curve = CubicBez::new((0.0, 10.0), (0.0, 10.0), (10.0, 10.0), (10.0, 10.0));
+
+            verify(curve.solve_t_for_y(10.0), &[]);
+        }
+    }
 }