Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

RFC: LiteSDCard: Add support for DMA/data completion interrupts #16

Open
wants to merge 10 commits into
base: master
Choose a base branch
from
Open

RFC: LiteSDCard: Add support for DMA/data completion interrupts #16

Changes from all commits
Commits
Show all changes
10 commits
Select commit Hold shift + click to select a range
f3fdb53
mmc: litex_mmc: use BIT() macros for IRQ registers
gsomlo Sep 24, 2023
c040c28
mmc: litex_mmc: move completion setup to irq_init
gsomlo Sep 24, 2023
1af3e8a
mmc: litex_mmc: wait for data completion outside cmd handler
gsomlo Oct 13, 2023
1f7136d
mmc: litex_mmc: isolate cmd irq heuristic
gsomlo Oct 13, 2023
5a7c053
mmc: litex_mmc: fix cmd irq/completion sequencing
gsomlo Oct 13, 2023
f1557fa
mmc: litex_mmc: switch cmd_done irq to edge-triggered
gsomlo Sep 24, 2023
66074a0
mmc: litex_mmc: use irq for all commands
gsomlo Oct 13, 2023
10240a9
mmc: litex_mmc: turn off IRQs on driver removal
gsomlo Sep 24, 2023
1491670
mmc: litex_mmc: ack all handled IRQs together
gsomlo Sep 24, 2023
b695cee
mmc: litex_mmc: add IRQ support for DMA data xfers
gsomlo Oct 13, 2023
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
119 changes: 77 additions & 42 deletions drivers/mmc/host/litex_mmc.c
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -68,10 +68,10 @@
#define SD_SLEEP_US 5
#define SD_TIMEOUT_US 20000

#define SDIRQ_CARD_DETECT 1
#define SDIRQ_SD_TO_MEM_DONE 2
#define SDIRQ_MEM_TO_SD_DONE 4
#define SDIRQ_CMD_DONE 8
#define SDIRQ_CARD_DETECT BIT(0)
#define SDIRQ_SD_TO_MEM_DONE BIT(1)
#define SDIRQ_MEM_TO_SD_DONE BIT(2)
#define SDIRQ_CMD_DONE BIT(3)

struct litex_mmc_host {
struct mmc_host *mmc;
Expand All @@ -87,6 +87,7 @@ struct litex_mmc_host {
dma_addr_t dma;

struct completion cmd_done;
struct completion data_done;
int irq;

unsigned int ref_clk;
Expand Down Expand Up @@ -124,27 +125,19 @@ static int litex_mmc_send_cmd(struct litex_mmc_host *host,
u8 cmd, u32 arg, u8 response_len, u8 transfer)
{
struct device *dev = mmc_dev(host->mmc);
void __iomem *reg;
int ret;
u8 evt;

if (host->irq > 0)
reinit_completion(&host->cmd_done);

/* Send command */
litex_write32(host->sdcore + LITEX_CORE_CMDARG, arg);
litex_write32(host->sdcore + LITEX_CORE_CMDCMD,
cmd << 8 | transfer << 5 | response_len);
litex_write8(host->sdcore + LITEX_CORE_CMDSND, 1);

/*
* Wait for an interrupt if we have an interrupt and either there is
* data to be transferred, or if the card can report busy via DAT0.
*/
if (host->irq > 0 &&
(transfer != SD_CTL_DATA_XFER_NONE ||
response_len == SD_CTL_RESP_SHORT_BUSY)) {
reinit_completion(&host->cmd_done);
litex_write32(host->sdirq + LITEX_IRQ_ENABLE,
SDIRQ_CMD_DONE | SDIRQ_CARD_DETECT);
if (host->irq > 0)
wait_for_completion(&host->cmd_done);
}

ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_CMDEVT, dev);
if (ret) {
Expand All @@ -169,20 +162,14 @@ static int litex_mmc_send_cmd(struct litex_mmc_host *host,
if (transfer == SD_CTL_DATA_XFER_NONE)
return ret; /* OK from prior litex_mmc_sdcard_wait_done() */

/*
* NOTE: this information becomes available at the same time
* as LITEX_CORE_CMDEVT, and is therefore also covered by the
* SDIRQ_CMD_DONE interrupt and cmd_done completion
*/
ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_DATEVT, dev);
if (ret) {
dev_err(dev, "Data xfer (cmd %d) error, status %d\n", cmd, ret);
return ret;
}

/* Wait for completion of (read or write) DMA transfer */
reg = (transfer == SD_CTL_DATA_XFER_READ) ?
host->sdreader + LITEX_BLK2MEM_DONE :
host->sdwriter + LITEX_MEM2BLK_DONE;
ret = readx_poll_timeout(litex_read8, reg, evt, evt & SD_BIT_DONE,
SD_SLEEP_US, SD_TIMEOUT_US);
if (ret)
dev_err(dev, "DMA timeout (cmd %d)\n", cmd);
dev_err(dev, "Data xfer (cmd %d) error, status %d\n", cmd, ret);

return ret;
}
Expand Down Expand Up @@ -255,26 +242,39 @@ static irqreturn_t litex_mmc_interrupt(int irq, void *arg)
struct mmc_host *mmc = arg;
struct litex_mmc_host *host = mmc_priv(mmc);
u32 pending = litex_read32(host->sdirq + LITEX_IRQ_PENDING);
irqreturn_t ret = IRQ_NONE;
u32 handled = 0;

/* Check for card change interrupt */
if (pending & SDIRQ_CARD_DETECT) {
litex_write32(host->sdirq + LITEX_IRQ_PENDING,
SDIRQ_CARD_DETECT);
handled |= SDIRQ_CARD_DETECT;
mmc_detect_change(mmc, msecs_to_jiffies(10));
ret = IRQ_HANDLED;
}

/* Check for command completed */
if (pending & SDIRQ_CMD_DONE) {
/* Disable it so it doesn't keep interrupting */
litex_write32(host->sdirq + LITEX_IRQ_ENABLE,
SDIRQ_CARD_DETECT);
handled |= SDIRQ_CMD_DONE;
complete(&host->cmd_done);
ret = IRQ_HANDLED;
}

return ret;
/* Check for DMA read completed */
if (pending & SDIRQ_SD_TO_MEM_DONE) {
handled |= SDIRQ_SD_TO_MEM_DONE;
complete(&host->data_done);
}

/* Check for DMA write completed */
if (pending & SDIRQ_MEM_TO_SD_DONE) {
handled |= SDIRQ_MEM_TO_SD_DONE;
complete(&host->data_done);
}

if (handled) {
/* Acknowledge handled interrupts */
litex_write32(host->sdirq + LITEX_IRQ_PENDING, handled);
return IRQ_HANDLED;
}

return IRQ_NONE;
}

static u32 litex_mmc_response_len(struct mmc_command *cmd)
Expand Down Expand Up @@ -382,6 +382,9 @@ static void litex_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
return;
}

if (host->irq > 0)
reinit_completion(&host->data_done);

litex_mmc_do_dma(host, data, &len, &direct, &transfer);
}

Expand All @@ -390,6 +393,22 @@ static void litex_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
response_len, transfer);
} while (cmd->error && retries-- > 0);

if (!cmd->error && transfer != SD_CTL_DATA_XFER_NONE) {
void __iomem *reg = (transfer == SD_CTL_DATA_XFER_READ) ?
host->sdreader + LITEX_BLK2MEM_DONE :
host->sdwriter + LITEX_MEM2BLK_DONE;
u8 evt;

/* Wait for completion of (read or write) DMA transfer */
if (host->irq > 0)
wait_for_completion(&host->data_done);
cmd->error = readx_poll_timeout(litex_read8, reg,
evt, evt & SD_BIT_DONE,
SD_SLEEP_US, SD_TIMEOUT_US);
if (cmd->error)
dev_err(dev, "DMA timeout (cmd %d)\n", cmd->opcode);
}

if (cmd->error) {
/* Card may be gone; don't assume bus width is still set */
host->is_bus_width_set = false;
Expand Down Expand Up @@ -467,6 +486,11 @@ static const struct mmc_host_ops litex_mmc_ops = {
.set_ios = litex_mmc_set_ios,
};

static void litex_mmc_irq_off(void *sdirq)
{
litex_write32((void __iomem *)sdirq + LITEX_IRQ_ENABLE, 0);
}

static int litex_mmc_irq_init(struct platform_device *pdev,
struct litex_mmc_host *host)
{
Expand Down Expand Up @@ -494,9 +518,21 @@ static int litex_mmc_irq_init(struct platform_device *pdev,
goto use_polling;
}

/* Clear & enable card-change interrupts */
litex_write32(host->sdirq + LITEX_IRQ_PENDING, SDIRQ_CARD_DETECT);
litex_write32(host->sdirq + LITEX_IRQ_ENABLE, SDIRQ_CARD_DETECT);
ret = devm_add_action_or_reset(dev, litex_mmc_irq_off, host->sdirq);
if (ret)
return dev_err_probe(dev, ret,
"Can't register irq_off action\n");

/* Clear & enable interrupts */
litex_write32(host->sdirq + LITEX_IRQ_PENDING,
SDIRQ_CARD_DETECT | SDIRQ_CMD_DONE |
SDIRQ_SD_TO_MEM_DONE | SDIRQ_MEM_TO_SD_DONE);
litex_write32(host->sdirq + LITEX_IRQ_ENABLE,
SDIRQ_CARD_DETECT | SDIRQ_CMD_DONE |
SDIRQ_SD_TO_MEM_DONE | SDIRQ_MEM_TO_SD_DONE);

init_completion(&host->cmd_done);
init_completion(&host->data_done);

return 0;

Expand Down Expand Up @@ -583,7 +619,6 @@ static int litex_mmc_probe(struct platform_device *pdev)
litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 0);
litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 0);

init_completion(&host->cmd_done);
ret = litex_mmc_irq_init(pdev, host);
if (ret)
return ret;
Expand Down