Skip to content

marjo-luc/maap-jupyter-ide

 
 

Repository files navigation

MAAP Jupyter Interface

This repo includes JupyterLab extensions that have been built for the MAAP project (https://che-k8s.maap.xyz/)

In order to use each of these extensions they must be installed and enabled in your environment. Instructions for each extension can be found in the respective folder. Make sure each extension's dependencies are installed first.

These extensions have been developed for Jupyter 4.4.0 and Jupyter Lab 2.1.4.

Environment Setup for MAAP Extensions

All the MAAP Jupyter extensions share some common dependencies.

Environment Setup and Dependencies

Create a new Conda environment and install common dependencies and versions:

conda create --name maap-ade
conda activate maap-ade
conda install conda=4.7.12 jupyterlab=2.1.4 nodejs=10.13.0 gitpython=3.0.2
jupyter labextension install [email protected] --no-build
npm i [email protected]
pip install plotly==4.0.0
jupyter labextension install @jupyter-widgets/[email protected]

Extension Installation Order

There is no strict order to install the extensions in, but since some extensions depend on others, those dependencies should be installed first. For each of the following extensions (in recommended order), the sub-bullet points will indicate if it requires installing another extension listed above it first.

Note: Extensions marked as Che-only don't make sense to install locally, since they only work in the context of the Che UI and/or containerized contexts, and require use of the Che API.

  • hide_side_panel (Che-only)
  • ipycmc
  • pull_projects (Che-only)
  • show_ssh_info
    • ssh features (Che-only)
    • s3 features work locally
      • requires s3fs-fuse util and AWS keys/role, boto3 Python library installed (see extension README)
  • edsc_extension
    • requires maap-py library (see extension README)
  • maapsec
  • submit_jobs
    • requires maapsec
  • dps_magic
    • requires maapsec, submit_jobs, show_ssh_info
  • dps_info
    • requires maapsec, submit_jobs
  • insert_defaults_to_notebook
    • requires maap-py library (see extension README)
  • user_meta_form

Development

Getting Started on Your Extension

To build additional extensions for the project, it is recommended to start from a cookie-cutter or off a previously built extension.

Some Jupyter Extensions/Resources we have found helpful:

In JupyterLab's update to the stable 1.0 version, they have also updated and added lots of documentation on extension development. I recommend taking a look at this.

Deploying Extensions as Part of Eclipse Che

Dockerizing

Our development process involves building and running an extension locally in jupyterlab using a conda env before installing it on the che server. To enable an extension in Che, it must be included in the base docker image/stack that a Che workspace is launched with. The dockerfile that extensions are included in is the Dockerfile and the highest level in this repo. At the point of adding your extension into the Docker image, some minor changes may have to be made (mainly path issues). This will be explained in the bullets below.

An instance of this repository lives on the Che server under ~/che/dockerfiles/maap-jupyter-ide. Once an extension has been tested locally, rebuild the docker image with your new extensions.

  • Add your install to the Dockerfile. For example:
    # jlab pull projects into /projects directory
    COPY pull_projects /pull_projects
    RUN cd /pull_projects && npm run build
    RUN cd /pull_projects && jupyter labextension link .
    RUN cd /pull_projects && pip install -e .
    RUN cd /pull_projects && jupyter serverextension enable --py pull_projects --sys-prefix
    
  • If your extension includes a server extension you also need to modify entrypoint.sh. This is because jupyter server extensions function off of having a standard base url, but in the context of che the url is not what jupyter thinks it is.
    • Here is some magic that fixes it (add this line and replace with the path to where your load_jupyter_server_extension function is)
      perl -pi -e "s|web_app.settings\['base_url'\]|'/'|g" /show_ssh_info/show_ssh_info/__init__.py
  • Then rebuild the docker image. microk8s.docker build -t localhost:32000/che-jupyter-lab-ide .
  • Push! microk8s.docker push localhost:32000/che-jupyter-lab-ide
  • Now when you build a new workspace with the localhost:32000/che-jupyter-lab-ide image it will automatically fetch the new image. (found in the stack's Recipe or Raw Configuration)
    • you can also specify the image tag to use in your build on the stack if you want to use a previous build
  • Any change pushed to microk8s.docker push localhost:32000/che-jupyter-lab-ide will affect the default stacks on all user accounts. If you are testing something, you can create your own image and your own stack to play around with.

Che Stacks

To make your custom docker image available to users in Che, you need to make a new stack that creates workspaces using your image and make it available to users. Below is an example stack configuration using our locally built dockerized juptyer image with MAAP extensions installed.

Make sure to replace the image name in workspaceConfig.environments.default.recipe.image with the location of your image. In order for SSH-ing into the workspace to be possible, the org.eclipse.che.exec and org.eclipse.che.ssh installers must be enabled under workspaceConfig.environments.default.machines.ws/jupyter.installers.

Che Stack Raw Configuration

{
  "scope": "general",
  "description": "Use this one. Stable jupyter. No extra packages",
  "creator": "b07e3a58-ed50-4a6e-be17-fcf49ff8b242",
  "tags": [
    "MAAP",
    "JUPYTER",
    "STABLE"
  ],
  "workspaceConfig": {
    "defaultEnv": "default",
    "environments": {
      "default": {
        "recipe": {
          "contentType": "text/x-yaml",
          "type": "kubernetes",
          "content": "kind: List\nitems:\n - \n  apiVersion: v1\n  kind: Pod\n  metadata:\n   name: ws\n   labels:\n    name: ws\n  spec:\n   containers:\n    - \n     name: jupyter\n     image: 'localhost:32000/stable-ide:latest'\n     resources:\n      limits:\n       memory: 1024Mi\n     securityContext:\n       privileged: true\n - \n  apiVersion: v1\n  kind: Service\n  metadata:\n   name: ws\n  spec:\n   type: NodePort\n   ports:\n    - \n     port: 22\n   selector:\n    name: ws\n     \n    "
        },
        "machines": {
          "ws/jupyter": {
            "env": {
              "MACHINE_NAME": "WS_JUPYTER"
            },
            "servers": {
              "jupyter": {
                "path": "/",
                "attributes": {
                  "cookiesAuthEnabled": "true",
                  "type": "ide",
                  "secure": "true"
                },
                "protocol": "http",
                "port": "3100"
              }
            },
            "installers": [
              "org.eclipse.che.exec",
              "org.eclipse.che.ssh"
            ],
            "volumes": {
              "projects": {
                "path": "/projects"
              }
            },
            "attributes": {}
          }
        }
      }
    },
    "projects": [],
    "commands": [],
    "name": "default",
    "attributes": {},
    "links": []
  },
  "components": [],
  "name": "maap-jupyter-ide",
  "id": "stacktdo2q0ixhv7cge00"
}

Enabling Privileged Docker Containers

  1. Cluster Privileges
  • in /var/snap/microk8s/current/args/kubelet and /var/snap/microk8s/current/args/kube-apiserver, append --allow-privileged
  • restart both services:
sudo systemctl restart snap.microk8s.daemon-apiserver
sudo systemctl restart snap.microk8s.daemon-kubelet
  1. Che Permissions
  • in che/dockerfiles/init/manifest/che.env, set CHE_DOCKER_PRIVILEGED=true under the Privileged Mode section
  • restart Che

Creating and Sharing Stacks

To create a stack, you write a raw configuration with all the che and docker settings your workspace will require, including installers, volumes, docker run tags, docker images, etc. See the example above.

To share a stack, you will need to be the owner (creator) of the stack. Go to the homepage of where your Che instance is hosted and add /swagger to the end of the url for an interface with Che's API. Under the permissionssection, make a POST request with the users you want to share with and the id of your stack (shows up at the bottom of the configuration after creation). POST body:

{
"userId": "*",
  "domainId": "stack",
  "instanceId": "${STACK_ID}",
  "actions": [
    "read",
    "search"
  ]
}

reference: https://www.eclipse.org/che/docs/che-6/stacks.html#sharing-stacks-and-system-stacks .

About

Jupyter Extensions for Che UI

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • TypeScript 46.0%
  • Python 40.7%
  • JavaScript 11.0%
  • Shell 0.7%
  • Makefile 0.6%
  • CSS 0.4%
  • Other 0.6%