Small command line application to manage video projector using PJLINK Protocol.
PJLINK password authentication is supported
Note : only on/off function supported for now.
Written in C++ using openFrameworks 0.8.4 on Ubuntu 14.04 LTS
Core Addons :
- ofxNetwork
Extra addons :
- ofxArgParser : https://github.com/satoruhiga/ofxArgParser
- ofxPJControl : https://github.com/martialgallorini/ofxPJControl
Usage : pjCmdLine [-ip address] [-pass password] [-mode protocol] [-pwr state]
state = 1 (on) / 0 (off)
protocol = PJLINK / NEC / SANYO / CHRISTIE / EPSON
Check default communication ports before building.
This software is open source and is free to modify and redistribute. Please enclose source code when redistributing. Feel free to contribute and share.
- close connection and quit after connection problem (bad IP or device not responding) to avoid endless loop
pjCmdLine
Martial GALLORINI (http://www.martialgallorini.com/)
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.