BME680 /w STM32

implementation for BME680 support for STM32 microcontroller
deprecated Driver by Bosch Sensortec at 2022, not recommend for new designs, use BME68x_SensorAPI instead --> https://github.com/boschsensortec/BME68x_SensorAPI
this implementation is compatible with all STM32 boards, devkits

Buses, logic

LPUART1 and I2C3 is initialized (I don't provide .ioc file, so do your own)
Firmware will perform I2C scan and will print all detected addresses on LPUART1
will try to init BME680 sensor via address 0x76 and 0x77 for 5 times each
then will periodically return informations about temperature, humidity, Gas resistance, Pressure
FORCED mode enabled (no continous measurement, delays, less precise)