- implementation for BME680 support for STM32 microcontroller
- deprecated Driver by Bosch Sensortec at 2022, not recommend for new designs, use BME68x_SensorAPI instead --> https://github.com/boschsensortec/BME68x_SensorAPI
- this implementation is compatible with all STM32 boards, devkits
- LPUART1 and I2C3 is initialized (I don't provide .ioc file, so do your own)
- Firmware will perform I2C scan and will print all detected addresses on LPUART1
- will try to init BME680 sensor via address 0x76 and 0x77 for 5 times each
- then will periodically return informations about temperature, humidity, Gas resistance, Pressure
- FORCED mode enabled (no continous measurement, delays, less precise)