Skip to content

mattlacey/docker_bedrockserver

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Minecraft Server (Bedrock) for Docker

A Docker image and docker-compose file to run one or more instances of a native Minecraft Bedrock server in a minimal Ubuntu environment.

Introduction

This repository includes a DockerFile to build a Ubuntu-based Docker image configured to launch a Minecraft Bedrock Dedicated Server. In most cases, when run using the host network driver, as shown in the instructions, any Minecraft Bedrock client (e.g. XBox One, Windows 10, Android, etc.) on your local area network should be able to see the server under the list of "Friends."

This repository further includes an example docker-compose.yml file for Docker Compose to run multiple such containers on a macvlan network. When setup properly through the script and/or manual instructions below, it will concurrently run multiple servers that are each accessible to the local area network. For instance, I have used it to run different survival and creative worlds for each of my children at the same time, each of which is always accessible on our home network, no matter what device the kids are using.

The Minecraft data may further be exposed to your host, so that you can easily back up your worlds and configuration.

Version History

  • 1.14 (Dec 2019): Added automatic updating of minecraft server on image restart
  • 1.13.1 (Nov 2019): Major revisions to architecture, including running under a different user and expanded custom resource file/directory support
  • 0.1.12 (10 Jul 2019): Custom permission file support
  • 0.1.8.2 (16 Dec 2018): Bump Minecraft version number
  • Initial release (17 Oct 2018)

For updating from pre-1.13.1 versions, see Updating from Pre-1.13.1 Versions.

Prerequisites

  • Docker
  • Docker Compose (if you want to use the instructions for multiple servers)
  • git (if you need to build your own image or use docker-compose)

Quick Start (Single Server)

To build/run a single server with a new world on the host:

docker run -dit --name="minecraft" --network="host" karlrees/docker_bedrockserver

It's probable that, relying on the above command, you will lose your world if you ever have to update the docker image (e.g. for a new server version). One way to get around this, is to make the mcdata folder a Docker volume as follows:

docker run -dit --name="minecraft" --network="host" -v mcdata:/mcdata karlrees/docker_bedrockserver

However, it's nonetheless possible that Docker (or more likely you) could eventually inadvertantly remove the volume somehow. A more fool-proof solution is to actually mount the volume to the host, as shown in the next section.

Advanced Instructions

Single-server with externally mounted data

To build/run a single server with a world whose data is stored in an externally accessible folder:

Aside from giving you better peace of mind that you won't lose your data, this has the added benefit of giving you easy access to the mcdata folder so that you can create backups and/or manipulate your data.

Option A (Single-world Setup Script)

If you have git installed, you can pull the repository and take advantage of the setup script:

  1. Download the source code from git.
git clone https://github.com/karlrees/docker_bedrockserver
  1. Run the setup script.
cd docker_bedrockserver
./setup_standalone.sh

The container/server should now be running, and your world data can be found in the docker_bedrockserver/mcdata folder.

Option B (Single-world Manual Setup)

If you don't have git installed, and/or you want more control over the container configuration:

  1. Create (or locate) a parent folder to store (or that already stores) your Minecraft data. We'll refer this folder subsequently as the mcdata folder. You may use the supplied mcdata folder from the repository, or any other suitable location. For instance:
mkdir /path/to/mcdata
  1. Give this new folder permissions whereby it is accessible to the user under which the server will run in the docker container.

In Linux, there are a number of ways to do this. The easiest and most nuclear option would be:

sudo chmod -R 777 /path/to/mcdata

A more restrictive option would be to have the same user id as that under which the server runs take ownership of the mcdata folder. By default, this user id is 1132, so you would use the following command:

sudo chown -R 1132:1132 /path/to/mcdata

Other options would include adding the user 1132 to a group that has access to the mcdata folder, or changing the user id and/or group id under which the server runs to something that already has access to the mcdata folder. Changing the user id and/or group id under which the server runs is explained later in the document.

  1. Run the docker container
docker run -dit --name="minecraft" --network="host" -v /path/to/mcdata:/mcdata karlrees/docker_bedrockserver

Single-server / Existing world

To build/run a single server using a pre-existing Bedrock world folder:

  1. Follow Option A or Option B from above.
  2. Locate the world folder that stores the existing Minecraft world data for the world you wish to serve. This may or may not be named world, but we'll refer to it subsequently as the world folder.

You'll know this folder from the fact that it includes a file named "level.dat" and a subfolder named "db". For instance, if you wanted to import a world from the Windows 10 Minecraft app, this would be a folder such as C:\Users\username\AppData\Local\Packages\Microsoft.MinecraftUWP_8wekyb3d8bbwe\LocalState\games\com.mojang\minecraftWorlds\xxx, where username is the name of your user account and xxx is typically a random set of characters.

  1. Replace the contents of the /mcdata/worlds/world folder with the contents of the world folder you located.
  2. Reset permissions on the mcdata folder, if needed. See Step 3 of Option B.
  3. Restart the server
docker stop minecraft
docker start minecraft

Multiple worlds with docker-compose

To run multiple servers using multiple Bedrock worlds, each running at a separate IP address on your LAN:

Option C (Multi-world Setup Script)

The setup script can try to setup your environment for you. Be sure to install docker-compose.

  1. Download the source code from git.
git clone https://github.com/karlrees/docker_bedrockserver
  1. Run the setup_multi.sh script.
cd docker_bedrockserver
./setup_multi.sh

This copies the example .env file, docker-compose.yml file, and mcdata folder to their expected locations, and populates the environment variables with some naive assumptions about your network and mcdata storage location.

  1. If you want more than just the two example servers, edit the docker-compose.yml file to include a separate section for each server. Be sure to change the name for each server--change both the container_name property and the WORLD environment variable. Be sure to use a different IP address for each server as well.

  2. Run docker-compose

docker-compose up -d

If this doesn't work for you, you can try the manual setup below.

Option D (Multi-world Manual Setup)

  1. Download the source code from git and change to the docker_bedrockserver directory
git clone https://github.com/karlrees/docker_bedrockserver
  1. Setup a mcdata folder. See Steps 2-3 of Option B.

  2. Copy the example .env file and docker-compose.yml from the templates folder to parent directory.

cd docker_bedrockserver
cp templates/.env .env
cp templates/docker-compose.yml docker-compose.yml
  1. Edit the .env file as needed. You will probably need to at least:
  • change the IP Prefix to match your subnet
  • change eth0 to match your network interface
  • change the MCVOLUME to point to the absolute path of your mcdata folder from step 2
  1. Edit the docker-compose.yml file to include a separate section for each server, copying or editing the example servers already at the bottom of the file. Be sure to change the name for each server--change both the container_name property and the WORLD environment variable. Be sure to use a different IP address for each server as well.

  2. Run docker-compose

docker-compose up -d

Multiple existing worlds

To run multiple servers using multiple pre-existing Bedrock worlds, each running at a separate IP address:

  1. Follow Option C or Option D from above.
  2. Locate the world folder that stores the existing Minecraft world data for each world you wish to serve. This may or may not be named world, but we'll refer to it subsequently as the world folder.
  3. For each world, copy the contents of the world folder to the /mcdata/worlds/ folder, using a different name for each.

So you might have, for instance, a /mcdata/worlds/world1 folder, a /mcdata/worlds/world2 folder, and so forth.

  1. Reset permissions on the mcdata folder, if needed. See Step 3 of Option B.

  2. Edit docker-compose.yml to include a separate section for each server/world, copying or editing the example servers already at the bottom of the file. Be sure to change the name for each server/world to match what you used in step 3.

  3. Restart the docker-compose services.

docker-compose down
docker-compose up -d

Changing server properties

Server properties may be changed using either a custom server.properties file for your world, or MCPROP_ environment variables. Any time you change properties, you will need to restart the container for the changes to take effect.

server.properties

The container will look for a custom server-properties file for its world/server in each of the following locations: /mcdata/world.server.properties, /mcdata/worlds/world.server.properties, and /mcdata/worlds/world/server.properties (where world is the name of the world/server). It will then link the server.properties file for the server to the custom server.properties it locates.

If no custom server.properties file is found, a default server.properties file will be created, optionally using any supplied environment variables (see below).

MCPROP_ Environment variables

Environment variables may be passed through the command line or set in the docker-compose.yml file. For instance, to change the gamemode to 1 over the CLI, one would set the MCPROP_GAMEMODE environment variable to 1.

docker run -e MCPROP_GAMEMODE=1 -e WORLD=world -v /path/to/mcdata:/mcdata -dit --name="minecraft" --network="host" karlrees/docker_bedrockserver

The docker-compose.yml gives some examples of passing MCPROP_ environment variables through it.

Note that level-name is a special property that is set by the WORLD environment variable, as opposed to MCPROP_LEVEL-NAME.

Custom permissions / whitelist / resource files and folders

You can change your permissions.json file, whitelist.json file, resource directories, and so forth, by mounting the /mcdata folder to an external folder and making changes from there. These are all linked to the appropriate locations on the server when the container is started.

Multiple Servers

If you are running multiple servers, by default they will all share the same files in the /mcdata folder. You may or may not want to change this. You can create separate permissions, whitelists, etc., for a server by either saving the appropriate file or folder in your custom world folder, or prefacing the appropriate file(s) and/or directories in the mcdata folder with world., where world is the name of your world/server.

For instance, to create a separate permissions file for your world, you could create a file named /mcdata/world.permissions.json (where world is the name of your world). Or, you could save permissions.json to /mcdata/worlds/world/permissions.json. In either case, the container will link this file, if it exists, into the world container as the permissions.json file for the server.

Similarly, the container would copy the world.whitelist.json file, if it exists (where world is the name of your world), into the container as the whitelist.json file for the server.

Or, for a custom resource_packs directory, rename it world.resource_packs or save it to /mcdata/worlds/world/resource_packs.

You will need to restart the container for any changes to take effect.

Accessing the server console

To access the server console, if you're using the single-server instructions above:

docker attach minecraft

If you changed the container name in the run command, change minecraft to the container name you used. If you're using docker-compose instructions, replace minecraft with the container name you specified in the docker-compose.yml file (e.g. minecraft1, minecraft2, etc.).

You can then issue server commands, like stop, permission list, etc.

To exit, enter Ctrl-P followed by Ctrl-Q.

Restarting a server

You can stop a server in the console, or by issuing the following command (where minecraft is the container name):

docker stop minecraft

You can restart it with the following command.

docker start minecraft

If using docker-compose, you can restart all servers at once using:

docker-compose down
docker-compose up

Minecraft Server updates

By default, the image will check for an updated version of the Minecraft server on restart. So all you need to do is restart your image(s). So for a single-server install, assuming your image name is minecraft:

docker restart minecraft

For multiple servers using docker-compose:

docker-compose restart

Disabling automatic updates

Automatic updates may be disabled in one of two ways. First, you can delete the $MCSERVERFOLDER/.AUTOUPDATE file. For instance, if your image name is minecraft:

docker exec minecraft rm "/srv/bedrockserver/.AUTOUPDATE"

Second, you could disable auto-updates by setting the AUTOUPDATE build argument to 0 when building the docker image (which keeps the .AUTOUPDATE file from being created). For instance:

docker build --build-arg AUTOUPDATE=0 -t karlrees/docker_bedrockserver:beta .

Forcing updates

If auto-updates are disabled, you can still force a minecraft server update using the updatebedrockserver.sh script. For instance, if your image name is minecraft:

docker exec minecraft /srv/bedrockserver/updatebedrockserver.sh
docker restart minecraft

Forcing updates to a specific version

You can force an update to a specific version by adding the version number to the end of the update script. E.g.:

docker exec minecraft /srv/bedrockserver/updatebedrockserver.sh 1.14.0.9
docker restart minecraft

Alternatively, you can use the VERSION build argument when building the image.

Updating the Docker Image

To keep up to date with the latest features, you may need to update the docker image from time to time. To update the image, first remove the existing containers. Then pull the update, and run the container again. To do this:

If you are pulling the docker image directly (basic single-server installs)

Use the following commands, where minecraft is the container name:

docker stop minecraft
docker rm minecraft
docker pull karlrees/docker_bedrockserver

Then use whatever docker run command you used to run the container.

If you are building the docker image yourself (e.g. multiple world, pulling the source from GitHub)

Standalone server

If you used the setup_standalone script, just re-run it (ignoring any errors about directories that already exist).

Otherise, use the following commands, where ~/docker_bedrockserver is the location where you downloaded the source files:

cd ~/docker_bedrockserver
docker stop minecraft
docker rm minecraft
git pull
docker build  -t karlrees/docker_bedrockserver .
docker run -dit --name="minecraft" --network="host" -v /path/to/mcdata:/mcdata karlrees/docker_bedrockserver

Multi-world with docker-compose

Use the following commands, where ~/docker_bedrockserver is the location where you downloaded the source files:

cd ~/docker_bedrockserver
docker-compose down
git pull
docker-compose build
docker-compose up -d

Changing the user the server runs under

By default, the server runs within the container under user 1132 and group 1132. You can change these by setting the MCUSER and MCGROUP environment build arguments. (Depending on what you choose, you may need to reset the permissions on your mcdata folder to match -- see Step 3 of Option B).

If you are using the docker-compose approach, all you need to do is change these values in the .env file.

Otherwise, you will need to download and build the docker image yourself. You would do this instead of pulling the docker image. For instance, to build under user id 1000 and group id 1000:

git clone https://github.com/karlrees/docker_bedrockserver
cd docker_bedrockserver
docker build --build-arg MCUSER=1000 --build-arg MCGROUP=1000 -t karlrees/docker_bedrockserver .

Be sure to use a numeric id, not a display name like root or user.

Using a MacOS host

Thanks to @Shawnfreebern for these instructions.

According to docker docs:

The host networking driver only works on Linux hosts, and is not supported on Docker Desktop for Mac ...

The result is that you have to specify which ports to publish on MacOS. For a remote server you can (possibly) get away with publishing only your chosen server port (19132) but for LAN games minecraft opens a second randomly chosen port which you need to publish, but can't because you don't know the number when you start the container.

Docker has a --publish-all function but it doesn't seem to work:

it appears to only publish ports opened early in the container start process, and the LAN port is opened a bit later both TCP and UDP are required and it looks like --publish-all doesn't get that done it assigns known ports to randomly selected higher ports, which further complicates remote server access My solution at present is to artificially limit which random ports are available, and then specifically publish all port options for both TCP and UDP:

docker run --sysctl net.ipv4.ip_local_port_range="39132 39133" -p 19132:19132 -p 19132:19132/udp -p 39132:39132 -p 39132:39132/udp -p 39133:39133 -p 39133:39133/udp --name="minecraft" etc

Someone will hopefully find a better way to do this (I am not a docker, minecraft, or mac networking expert) but until that's discovered this might be helpful to other mac users.

Using a Windows host

The above instructions assume you are running on a Linux-based host. You can also run the containers on a Windows-based host. However, because of differences in how Windows-based hosts handle networking, you won't by default have access to the servers on your LAN.

You may be able to get access to the servers on your LAN, if you bridge the Windows docker network with your LAN and/or set up port forwarding. These are not tasks for the faint-hearted, and I make no attempt to describe them here.

Troubleshooting

The server says that it cannot open the port.

This could be one of two things. First, the obvious issue could be that you are running two servers over the same network interface. If this is your problem, use the docker-compose solution, and give each server a separate IP address.

Second, I've seen this error when there is a permission problem with some or all of the resource files when you are mounting an external volume to the mcdata folder. The solution is to make sure that the user id (the specific number--e.g. 1132) of all of your files is the same as being used in the container. See above.

Updating from pre-1.13.1 versions

If you have problems after updating to a 1.13.1 image or higher, it is most likely related to permissions. A quick and dirty solution may be to go into your worlds volume and run either chmod -R 777 *, or chown -R 1132:1132 *. An even more quick and dirty solution would be to run the legacy branch instead. For instance:

docker pull karlrees/docker_bedrockserver:legacy
docker run -dit --name="minecraft" --network="host" karlrees/docker_bedrockserver:legacy

Of course, the most preferred solution (and most likely to be supported going forward) would be to start mounting the mcdata volume instead of the worlds folder, as described elsewehere herein.

A few changes in the update that you may or may not need to be aware of:

Changed mount point

Prior to version 1.13.1, the recommended installation procedure was to mount directly to the srv/bedrockserver/worlds folder. We now recommend mounting to the /mcdata folder, which should be up one level from your worlds folder. See the instructions above and the new DockerFile.

Changed user id

We were previously running the server within the container as root. We have changed to user id to 1132. You may need to change the permissions on your shared mcdata/worlds folder to access them, and/or change the user id under which the container is running (see above).

Docker-compose.yml changes

If you were using the docker-compose.yml file before, we have changed the docker-compose.yml file somewhat. You should probably save your previous version as a reference, download the new version, and readjust the new version to match the changes you made to your previous version.

Note that docker-compose.yml no longer exists in the repository. The expectation is that users will copy the /templates/docker-compose.yml to docker-compose.yml, either manually or via the setup_multi.sh script.

Changed .env file usage

Before, certain environment varaibles such as the installer URL were always being set from the .env file, which made the defaults in docker-compose.yml and the DockerFile kind of pointless. I have commented out these values in the new .env file. Going forward, I suggest you use the .env file only if you want to override the default docker-compose.yml or DockerFile value.

Also, git is now configured to ignore the .env file (and docker-compose.yml), so that you can update the project in the future without losing your settings.

Contributors

  • @karlrees - original author and maintainer
  • @ParFlesh - the guy who actually knows his way around Linux
  • @eithe - Got the ball rolling on auto-updates

Additional contributions from: @Shawnfreebern, @rsnodgrass, @RemcoHulshof, @tsingletonacic, and probably others I lost track of. Thanks!

About

Native Bedrock Minecraft Server Docker Project

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Shell 62.7%
  • Batchfile 30.9%
  • Dockerfile 6.4%