This is a fork of the really helpful tiletool software of @AMDmi3. The reason to fork his software was the need to change the directory layout that the tiletool uses. Originally tiles are read and written in the form of tms-style
{path_to_tiles}/{z}/{x}/{y}.png
The only difference to the original is that this one uses the directory layout used by Mapproxy (https://github.com/mapproxy/mapproxy) which is:
{path_to_tiles}/{zz}/{xxx}/{xxx}/{xxx}/{yyy}/{yyy}/{yyy}.png
To compile it I had to install:
sudo apt install cmake
sudo apt install zlib1g-dev
sudo apt install libpng16-dev
A tool for processing pregenerated sets of digital map tiles.
Each tile of lower zoom covers 4x more area, so it has 4x more features and thus is 4x harder to render. Because of that, for some renderers lower zoom tiles are not frequently updated and/or contain much less features than higher zoom tiles, which is not really good. Main purpose of this utility is to fix or at least improve this situation, as it allows to render lowzoom tiles using higher zooms. It also allows to blend semitransparent overlays with the tileset, producing full-fledged map tiles without producing extra load on renderers.
- Generation of lower-level tiles from higher-level
- Applying semitransparent overlays
- Merging several tilesets together
- Running arbitrary commands on tiles
Only required dependencies are cmake and libpng. To compile:
cmake . && make
To run tests, after building run:
make test
To install systemwide:
make install
tiletool <OPTIONS>
Options:
-0..-9
Set png compression level. Default is 2.
-b, --input-bounds=<BBOX>
Limit processing with bounding box (implies same limit to
output).
-B, --output-bounds=<BBOX>
Limit output with bounding box.
You may use -B when you need all tiles processed, but only
specific subset of tiles written.
There are two ways of specifying bounding boxes:
zoom/x/y
bbox is limited by tile with specified zoom and coordinates
for example, -b 8/0/0 is upper-leftmost tile at zoom 8.
Ranges are supported for x and y values, for example
-b 5/1-12/5-9
left,bottom,right,top
Usual bounding box in geographical coordinates. For example:
37.3,55.53,37.93,55.95 - approximate bbox for Moscow (Russia)
-z, --input-zoom=<ZOOM or MINZOOM-MAXZOOM>
Specify which zoom (or zoom range) will be used for input tiles.
-Z, --output-zoom=<ZOOM or MINZOOM-MAXZOOM>
Specify for which zoom (or zoom range) tiles will be generated.
One of above two options must be specified. If input zoom is not
specified, it's set to (max output zoom + 1). If output zoom is
not specified, it's set to 0-(min output zoom).
For example, if you have level 6 tiles and you need to generate
level 0-5 tiles based on it, you may either specify:
-z 6 -Z 0-5
-z 6 (output zoom is automatically set to 0-5)
-Z 0-5 (input zoom is automatically set to 6)
Ranges must not be adjascent, for example you may generate level 0
tile based on level 6 tiles:
-z 0 -Z 6
-e, --empty-tile=<PATH>
Specify a file to be used instead of tiles which are not found in
the input set. You may omit it if your input tile set is complete,
but the process will fail if empty tile is not set and input tile
is missing.
-j, --jobs=<N>
Set maximum number of spawned child processes. By default it is 0
and no child processes are spawned, all tiles are processed
sequentionally. If this is > 0, tile loading and merging is still
done sequentionally (this can't be paralleled), but overlay
loading/applying, and saving for each tile is done in a child
process. Note that -j 0 (no parallelization) is not the same as
-j 1 (one child).
-i, --input=<INPUT TILESET>
Specify path to directory which contains input tiles.
You may specify this option multiple times to provide fallback
tilesets.
-o, --output=<OUTPUT TILESET>
Specify path to directory to store output tiles in. Required.
-l, --overlay=<OVERLAY TILESET>
Specify path to overlay which will be blended with output tiles.
You may specify this option multiple times to use multiple
overlays.
-c, --postcmd=<COMMAND>
Specify a command to be run on a newly saved tile. You may want to
set this to, for example, 'optipng -quiet -o1'.
-v, --verbose
Increase verbosity.
-h, --help
Display help on options.
-
For example, you have zoom 8 tiles in mapnik/ directory, and set of transparent tiles with captions in a captions/ directory. You may generate all missing zooms (0-7) with the following command:
tiletool -z 8 -l captions -i mapnik -o outputresulting tiles will be saved in output/.
-
Now, you have some tiles in the original tileset updated and you want to only regenerate affected lowzoom tiles. Unfortunately, you need to generate all lowzoom tiles from scratch (your previous output is unuseable as it has overlay applied), but fortunately you don't need to recreated unaffected tiles, thus though you need to walk whole tile tree, most expensive operations (blending and png saving) will only be run on updated tiles.
For example, Moscow fits into two tiles on z8, so if these are updated, you should run:
tiletool -B 8/154/79-80 -z 8 -o captions -i mapnik -o output -
You may use optipng to optimized your tiles to save space & traffic:
tiletool -c 'optipng -quiet -o1' -z 8 -o captions -i mapnik -o outputYou may also add -1 to spend less time compressing tiles that will be recompressed anyway.
GNU GPLv3+, see COPYING.
Bundled libttip (image processing library) is licensed under LGPLv3+.