Elegoo Neptune Profiles for PrusaSlicer/slic3r/SuperSlicer

This is a simple adaptation of the Creality Ender profiles for the Elegoo Neptune family (1 untested, 2, 2S, 2D, X, and the 3).

Copy to your machine, then they will be available in PrusaSlicer as presets with nice thumbnail images.

Thanks to just_trey for the platform texture and for turning Elegoo’s cad files into a nice stl.

These will work with SuperSlicer if you save your own presets, there are a couple code changes that will give “errors” that are fixed by saving copies of the presets or you can get the “fixed” profiles here.

These will be added in the next releases of the programs automatically.

Installation

1. Open PrusaSlicer/SuperSlicer/Slic3r if this is a new install in order to create the settings folder.
2. Close the Configuration Wizard if it is open, open the Help menu and then select Show Configuration Folder.
3. Close PrusaSlicer/SuperSlicer/Slic3r.
4. Copy Elegoo.ini, Elegoo.idx, and the Elegoo directory to your PrusaSlicer\SuperSlicer\Slic3r vendor directory. If for some reason using Show Configuration Folder didn’t open it they are in the following location: on MacOS this will be in =~/Library/Application\ Support/<app name>/vendor/, on Windows this will be = C:\users\<username>\AppData\Roaming\<app name>\vendor\ where app name is PrusaSlicer/SuperSlicer/Slic3r. AppData is a hidden folder.
5. Open PrusaSlicer/SuperSlicer/Slic3r and add printers (Configuration Menu -> Configuration Wizard -> Select Elegoo (under Other Vendors for PrusaSlicer and then select Elegoo FFF after checking the box) -> Click on the checkbox for the printer/s you want to add -> Select Filaments from the selections on the left and select any or all default profiles you want available -> Use the Next button at the bottom to go through and select any other options you may want enabled (Recommend Expert Mode for all settings options to be visible) -> Click Finish).
6. If you are using Octoprint or some other Print Host, select Printer Settings and click on the Gear Icon near the top next to the drop down menu with your printer name to add a “Physical Printer” and enter your device details.

Modifications/Notes

• Configured printable area for Neptune 2 / 2D is 225mm x 210mm. This is to avoid the binder clips that come stock. If you’ve fitted a magnetic sheet without binder clips, you can increase the configured area to 235mm x 235mm.
• All filament temperatures and settings are the same as the Creality Ender 3.
• Neptune 2D (dual extruder) profile is based on Creality CR-X profile and modified by mlee12382.
• Neptune X, Neptune 3, and Neptune 1 profiles added by mlee12382.

Credits

• Base profiles created by Andrew Suzuki - @andrewsuzuki - andrewsuzuki.com