added support for ragged connections

doc/api.rst

@@ -73,7 +73,9 @@ Post-processing on connectivity
 
    degree
    seed_target_indices
+   seed_target_multivariate_indices
    check_indices
+   check_multivariate_indices
    select_order
 
 Visualization functions

examples/granger_causality.py

@@ -145,7 +145,7 @@
 
 ###############################################################################
 # We will focus on connectivity between sensors over the parietal and occipital
-# cortices, with 20 parietal sensors designated as group A, and 20 occipital
+# cortices, with 20 parietal sensors designated as group A, and 22 occipital
 # sensors designated as group B.
 
 # %%
@@ -157,17 +157,8 @@
 signals_b = [idx for idx, ch_info in enumerate(epochs.info['chs']) if
              ch_info['ch_name'][2] == 'O']
 
-# XXX: Currently ragged indices are not supported, so we only consider a single
-# list of indices with an equal number of seeds and targets
-min_n_chs = min(len(signals_a), len(signals_b))
-signals_a = signals_a[:min_n_chs]
-signals_b = signals_b[:min_n_chs]
-
-indices_ab = (np.array(signals_a), np.array(signals_b))  # A => B
-indices_ba = (np.array(signals_b), np.array(signals_a))  # B => A
-
-signals_a_names = [epochs.info['ch_names'][idx] for idx in signals_a]
-signals_b_names = [epochs.info['ch_names'][idx] for idx in signals_b]
+indices_ab = (np.array([signals_a]), np.array([signals_b]))  # A => B
+indices_ba = (np.array([signals_b]), np.array([signals_a]))  # B => A
 
 # compute Granger causality
 gc_ab = spectral_connectivity_epochs(
@@ -181,8 +172,8 @@
 
 ###############################################################################
 # Plotting the results, we see that there is a flow of information from our
-# parietal sensors (group A) to our occipital sensors (group B) with noticeable
-# peaks at around 8, 18, and 26 Hz.
+# parietal sensors (group A) to our occipital sensors (group B) with a
+# noticeable peak at ~8 Hz, and smaller peaks at 18 and 26 Hz.
 
 # %%
 
@@ -208,8 +199,7 @@
 #
 # Doing so, we see that the flow of information across the spectrum remains
 # dominant from parietal to occipital sensors (indicated by the positive-valued
-# Granger scores). However, the pattern of connectivity is altered, such as
-# around 10 and 12 Hz where peaks of net information flow are now present.
+# Granger scores), with similar peaks around 10, 18, and 26 Hz.
 
 # %%
 
@@ -289,8 +279,8 @@
 # Plotting the TRGC results, reveals a very different picture compared to net
 # GC. For one, there is now a dominance of information flow ~6 Hz from
 # occipital to parietal sensors (indicated by the negative-valued Granger
-# scores). Additionally, the peaks ~10 Hz are less dominant in the spectrum,
-# with parietal to occipital information flow between 13-20 Hz being much more
+# scores). Additionally, the peak ~10 Hz is less dominant in the spectrum, with
+# parietal to occipital information flow between 13-20 Hz being much more
 # prominent. The stark difference between net GC and TRGC results indicates
 # that the net GC spectrum was contaminated by spurious connectivity resulting
 # from source mixing or correlated noise in the recordings. Altogether, the use
@@ -366,8 +356,8 @@
 
 # gets the singular values of the data
 s = np.linalg.svd(raw.get_data(), compute_uv=False)
-# finds how many singular values are "close" to the largest singular value
-rank = np.count_nonzero(s >= s[0] * 1e-5)  # 1e-5 is the "closeness" criteria
+# finds how many singular values are 'close' to the largest singular value
+rank = np.count_nonzero(s >= s[0] * 1e-5)  # 1e-5 is the 'closeness' criteria
 
 ###############################################################################
 # Nonethless, even in situations where you specify an appropriate rank, it is
@@ -387,7 +377,7 @@
 try:
     spectral_connectivity_epochs(
         epochs, method=['gc'], indices=indices_ab, fmin=5, fmax=30, rank=None,
-        gc_n_lags=20)  # A => B
+        gc_n_lags=20, verbose=False)  # A => B
     print('Success!')
 except RuntimeError as error:
     print('\nCaught the following error:\n' + repr(error))

examples/handling_ragged_arrays.py

@@ -0,0 +1,154 @@
+"""
+=========================================================
+Working with ragged indices for multivariate connectivity
+=========================================================
+
+This example demonstrates how multivariate connectivity involving different
+numbers of seeds and targets can be handled in MNE-Connectivity.
+"""
+
+# Author: Thomas S. Binns <[email protected]>
+# License: BSD (3-clause)
+
+# %%
+
+import numpy as np
+
+from mne_connectivity import spectral_connectivity_epochs
+
+###############################################################################
+# Background
+# ----------
+#
+# With multivariate connectivity, interactions between multiple signals can be
+# considered together, and the number of signals designated as seeds and
+# targets does not have to be equal within or across connections. Issues can
+# arise from this when storing information associated with connectivity in
+# arrays, as the number of entries within each dimension can vary within and
+# across connections depending on the number of seeds and targets. Such arrays
+# are 'ragged', and support for ragged arrays is limited in NumPy to the
+# ``object`` datatype. Not only is working with ragged arrays is cumbersome,
+# but saving arrays with ``dtype='object'`` is not supported by the h5netcdf
+# engine used to save connectivity objects. The workaround used in
+# MNE-Connectivity is to pad ragged arrays with some known values according to
+# the largest number of entries in each dimension, such that there is an equal
+# amount of information across and within connections for each dimension of the
+# arrays.
+#
+# As an example, consider we have 5 channels and want to compute 2 connections:
+# the first between channels in indices 0 and 1 with those in indices 2, 3,
+# and 4; and the second between channels 0, 1, 2, and 3 with channel 4. The
+# seed and target indices can be written as such::
+#
+#   seeds   = [[0, 1   ], [0, 1, 2, 3]]
+#   targets = [[2, 3, 4], [4         ]]
+#
+# The ``indices`` parameter passed to
+# :func:`~mne_connectivity.spectral_connectivity_epochs` and
+# :func:`~mne_connectivity.spectral_connectivity_time` must be a tuple of
+# array-likes, meaning
+# that the indices can be passed as a tuple of: lists; tuples; or NumPy arrays.
+# Examples of how ``indices`` can be formed are shown below::
+#
+#   # tuple of lists
+#   ragged_indices = ([[0, 1   ], [0, 1, 2, 3]],
+#                     [[2, 3, 4], [4         ]])
+#
+#   # tuple of tuples
+#   ragged_indices = (((0, 1   ), (0, 1, 2, 3)),
+#                     ((2, 3, 4), (4         )))
+#
+#   # tuple of arrays
+#   ragged_indices = (np.array([[0, 1   ], [0, 1, 2, 3]], dtype='object'),
+#                     np.array([[2, 3, 4], [4         ]], dtype='object'))
+#
+# **N.B. Note that when forming ragged arrays in NumPy, dtype='object' must be
+# specified.**
+#
+# Just as for bivariate connectivity, the length of ``indices[0]`` and
+# ``indices[1]`` is equal (i.e. the number of connections), however information
+# about the multiple channel indices for each connection is stored in a nested
+# array. Importantly, these indices are ragged, as the first connection will be
+# computed between 2 seed and 3 target channels, and the second connection
+# between 4 seed and 1 target channel. The connectivity functions will
+# recognise the indices as being ragged, and pad them accordingly to make them
+# easier to work with and compatible with the h5netcdf saving engine. The known
+# value used to pad the arrays is ``-1``, an invalid channel index. The above
+# indices would be padded to::
+#
+#   padded_indices = (np.array([[0, 1, -1, -1], [0,  1,  2,  3]]),
+#                     np.array([[2, 3,  4, -1], [4, -1, -1, -1]]))
+#
+# These indices are what is stored in the connectivity object, and is also the
+# format of indices returned from the helper functions
+# :func:`~mne_connectivity.check_multivariate_indices` and
+# :func:`~mne_connectivity.seed_target_multivariate_indices`. It is also
+# possible to pass the padded indices to the connectivity functions directly.
+#
+# For the connectivity results themselves, the methods available in
+# MNE-Connectivity combine information across the different channels into a
+# single (time-)frequency-resolved connectivity spectrum, regardless of the
+# number of seed and target channels, so ragged arrays are not a concern here.
+# However, the maximised imaginary part of coherency (MIC) method also returns
+# spatial patterns of connectivity, which show the contribution of each channel
+# to the dimensionality-reduced connectivity estimate (explained in more detail
+# in :doc:`mic_mim`). Because these patterns are returned for each channel,
+# their shape can vary depending on the number of seeds and targets in each
+# connection, making them ragged. To avoid this, the patterns are padded along
+# the channel axis with the known and invalid entry ``np.nan``, in line with
+# that applied to ``indices``. Extracting only the valid spatial patterns from
+# the connectivity object is trivial, as shown below:
+
+# %%
+
+# create random data
+data = np.random.randn(10, 5, 200)  # epochs x channels x times
+sfreq = 50
+ragged_indices = ([[0, 1], [0, 1, 2, 3]],  # seeds
+                  [[2, 3, 4], [4]])  # targets
+
+# compute connectivity
+con = spectral_connectivity_epochs(
+    data, method='mic', indices=ragged_indices, sfreq=sfreq, fmin=10, fmax=30,
+    verbose=False)
+patterns = np.array(con.attrs['patterns'])
+padded_indices = con.indices
+n_freqs = con.get_data().shape[-1]
+n_cons = len(ragged_indices[0])
+max_n_chans = max(
+    [len(inds) for inds in ([*ragged_indices[0], *ragged_indices[1]])])
+
+# show that the padded indices entries are all -1
+assert np.count_nonzero(padded_indices[0][0] == -1) == 2  # 2 padded channels
+assert np.count_nonzero(padded_indices[1][0] == -1) == 1  # 1 padded channels
+assert np.count_nonzero(padded_indices[0][1] == -1) == 0  # 0 padded channels
+assert np.count_nonzero(padded_indices[1][1] == -1) == 3  # 3 padded channels
+
+# patterns have shape [seeds/targets x cons x max channels x freqs (x times)]
+assert patterns.shape == (2, n_cons, max_n_chans, n_freqs)
+
+# show that the padded patterns entries are all np.nan
+assert np.all(np.isnan(patterns[0, 0, 2:]))  # 2 padded channels
+assert np.all(np.isnan(patterns[1, 0, 3:]))  # 1 padded channels
+assert not np.any(np.isnan(patterns[0, 1]))  # 0 padded channels
+assert np.all(np.isnan(patterns[1, 1, 1:]))  # 3 padded channels
+
+# extract patterns for first connection using the ragged indices
+seed_patterns_con1 = patterns[0, 0, :len(ragged_indices[0][0])]
+target_patterns_con1 = patterns[1, 0, :len(ragged_indices[1][0])]
+
+# extract patterns for second connection using the padded indices (pad = -1)
+seed_patterns_con2 = (
+    patterns[0, 1, :np.count_nonzero(padded_indices[0][1] != -1)])
+target_patterns_con2 = (
+    patterns[1, 1, :np.count_nonzero(padded_indices[1][1] != -1)])
+
+# show that shapes of patterns are correct
+assert seed_patterns_con1.shape == (2, n_freqs)  # channels (0, 1)
+assert target_patterns_con1.shape == (3, n_freqs)  # channels (2, 3, 4)
+assert seed_patterns_con2.shape == (4, n_freqs)  # channels (0, 1, 2, 3)
+assert target_patterns_con2.shape == (1, n_freqs)  # channels (4)
+
+print('Assertions completed successfully!')
+
+# %%

examples/mic_mim.py

@@ -70,7 +70,7 @@
 ###############################################################################
 # We will focus on connectivity between sensors over the left and right
 # hemispheres, with 75 sensors in the left hemisphere designated as seeds, and
-# 75 sensors in the right hemisphere designated as targets.
+# 76 sensors in the right hemisphere designated as targets.
 
 # %%
 
@@ -81,13 +81,7 @@
 targets = [idx for idx, ch_info in enumerate(epochs.info['chs']) if
            ch_info['loc'][0] > 0]
 
-# XXX: Currently ragged indices are not supported, so we only consider a single
-# list of indices with an equal number of seeds and targets
-min_n_chs = min(len(seeds), len(targets))
-seeds = seeds[:min_n_chs]
-targets = targets[:min_n_chs]
-
-multivar_indices = (np.array(seeds), np.array(targets))
+multivar_indices = (np.array([seeds]), np.array([targets]))
 
 seed_names = [epochs.info['ch_names'][idx] for idx in seeds]
 target_names = [epochs.info['ch_names'][idx] for idx in targets]
@@ -171,12 +165,11 @@
 #
 # Here, we average across the patterns in the 13-18 Hz range. Plotting the
 # patterns shows that the greatest connectivity between the left and right
-# hemispheres occurs at the posteromedial regions, based on the regions with
-# the largest absolute values. Using the signs of the values, we can infer the
-# existence of a dipole source in the central regions of the left hemisphere
-# which may account for the connectivity contributions seen for the left
-# posteromedial and frontolateral areas (represented on the plot as a green
-# line).
+# hemispheres occurs at the left and right posterior and left central regions,
+# based on the areas with the largest absolute values. Using the signs of the
+# values, we can infer the existence of a dipole source between the central and
+# posterior regions of the left hemisphere accounting for the connectivity
+# contributions (represented on the plot as a green line).
 
 # %%
 
@@ -185,9 +178,9 @@
 fband_idx = [mic.freqs.index(freq) for freq in fband]
 
 # patterns have shape [seeds/targets x cons x channels x freqs (x times)]
-patterns = np.array(mic.attrs["patterns"])
-seed_pattern = patterns[0]
-target_pattern = patterns[1]
+patterns = np.array(mic.attrs['patterns'])
+seed_pattern = patterns[0, :, :len(seeds)]
+target_pattern = patterns[1, :, :len(targets)]
 # average across frequencies
 seed_pattern = np.mean(seed_pattern[0, :, fband_idx[0]:fband_idx[1] + 1],
                        axis=1)
@@ -217,7 +210,7 @@
 
 # plot the left hemisphere dipole example
 axes[0].plot(
-    [-0.1, -0.05], [-0.075, -0.03], color='lime', linewidth=2,
+    [-0.01, -0.07], [-0.07, -0.03], color='lime', linewidth=2,
     path_effects=[pe.Stroke(linewidth=4, foreground='k'), pe.Normal()])
 
 plt.show()
@@ -268,7 +261,7 @@
 axis.set_ylabel('Absolute connectivity (A.U.)')
 fig.suptitle('Multivariate interaction measure')
 
-n_channels = len(np.unique([*multivar_indices[0], *multivar_indices[1]]))
+n_channels = len(seeds) + len(targets)
 normalised_mim = mim.get_data()[0] / n_channels
 print(f'Normalised MIM has a maximum value of {normalised_mim.max():.2f}')
 
@@ -296,7 +289,7 @@
 
 # %%
 
-indices = (np.array([*seeds, *targets]), np.array([*seeds, *targets]))
+indices = (np.array([[*seeds, *targets]]), np.array([[*seeds, *targets]]))
 gim = spectral_connectivity_epochs(
     epochs, method='mim', indices=indices, fmin=5, fmax=30, rank=None,
     verbose=False)
@@ -307,7 +300,7 @@
 axis.set_ylabel('Connectivity (A.U.)')
 fig.suptitle('Global interaction measure')
 
-n_channels = len(np.unique([*indices[0], *indices[1]]))
+n_channels = len(seeds) + len(targets)
 normalised_gim = gim.get_data()[0] / n_channels
 print(f'Normalised GIM has a maximum value of {normalised_gim.max():.2f}')
 
@@ -369,9 +362,9 @@
 
 # no. channels equal with and without projecting to rank subspace for patterns
 assert (patterns[0, 0].shape[0] ==
-        np.array(mic_red.attrs["patterns"])[0, 0].shape[0])
+        np.array(mic_red.attrs['patterns'])[0, 0].shape[0])
 assert (patterns[1, 0].shape[0] ==
-        np.array(mic_red.attrs["patterns"])[1, 0].shape[0])
+        np.array(mic_red.attrs['patterns'])[1, 0].shape[0])
 
 
 ###############################################################################
@@ -392,8 +385,8 @@
 
 # gets the singular values of the data
 s = np.linalg.svd(raw.get_data(), compute_uv=False)
-# finds how many singular values are "close" to the largest singular value
-rank = np.count_nonzero(s >= s[0] * 1e-5)  # 1e-5 is the "closeness" criteria
+# finds how many singular values are 'close' to the largest singular value
+rank = np.count_nonzero(s >= s[0] * 1e-5)  # 1e-5 is the 'closeness' criteria
 
 
 ###############################################################################

mne_connectivity/__init__.py

@@ -17,4 +17,5 @@
 from .io import read_connectivity
 from .spectral import spectral_connectivity_time, spectral_connectivity_epochs
 from .vector_ar import vector_auto_regression, select_order
-from .utils import check_indices, degree, seed_target_indices
+from .utils import (check_indices, check_multivariate_indices, degree,
+                    seed_target_indices, seed_target_multivariate_indices)

mne_connectivity/base.py

@@ -483,7 +483,14 @@ def _prepare_xarray(self, data, names, indices, n_nodes, method,
 
         # set method, indices and n_nodes
         if isinstance(indices, tuple):
-            new_indices = (list(indices[0]), list(indices[1]))
+            if all([isinstance(inds, np.ndarray) for inds in indices]):
+                # leave multivariate indices as arrays for easier indexing
+                if all([inds.ndim > 1 for inds in indices]):
+                    new_indices = (indices[0], indices[1])
+                else:
+                    new_indices = (list(indices[0]), list(indices[1]))
+            else:
+                new_indices = (list(indices[0]), list(indices[1]))
             indices = new_indices
         kwargs['method'] = method
         kwargs['indices'] = indices