TRIP2 solution

[droofy]

This is a TRIP2 Work

[morcibacsi]

Have you checked it with DISPLAY_MODE set to 1 and 2 respectively? Is it working in both versions as expected?

https://github.com/morcibacsi/PSAVanCanBridge/blob/master/PSAVanCanBridge/Config.h#L31

[droofy]

Yes, It’s work which both

…

Le 2 sept. 2021 à 10:10, Peter Pinter ***@***.***> a écrit :  Have you checked it with DISPLAY_MODE set to 1 and 2 respectively? Is it working in both versions as expected? https://github.com/morcibacsi/PSAVanCanBridge/blob/master/PSAVanCanBridge/Config.h#L31 — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

[morcibacsi]

So you mean, when the DISPLAY_MODE it is set to 2 then the "third page" on the display still shows the RPM at the first icon and the speed at the third icon?

[droofy]

DISPLAY_MODE it is set to 2 then the "third page" it displays the RPM well. I did it differently, and it works for me. So I leave the normal display : I created a DISPLAY_MODE 3 to test. I put the same thing as DISPLAY_MODE 1 by adding in "/PSAVanCanBridge/src/Can/CanDataSenderTask.h" : if (dataToBridge.LeftStickButtonPressed) { trip0Icon1Data = round(FUEL_TANK_CAPACITY_IN_LITERS * dataToBridge.FuelLevel / 100); trip0Icon3Data = dataToBridge.OilTemperature; } Translated with www.DeepL.com/Translator (free version)

…

Le 2 sept. 2021 à 20:41, Peter Pinter ***@***.***> a écrit : DISPLAY_MODE it is set to 2 then the "third page"

[thiagocanella]

i will test this next week @droofy