Running OSRM

How to run the tool chain

Instructions for compiling OSRM can be found [here](Building OSRM).

Instructions for compiling and running OSRM on a Amazon EC2 Micro Instance [here](Building and Running OSRM on EC2).

Getting a city up and running in 4 steps:

Note: You must select a profile before running osrm-extract. You can select the car profile by running ln -s ../profiles/car.lua profile.lua

wget http://download.geofabrik.de/europe/germany/bremen-latest.osm.pbf

./osrm-extract -p profile.lua bremen-latest.osm.pbf
./osrm-contract bremen-latest.osrm
./osrm-routed bremen-latest.osrm

Extracting the Road Network

Exported OSM data files can be obtained from providers such as Geofabrik. OSM data comes in a variety of formats including XML and PBF, and contain a plethora of data. The data includes information which is irrelevant to routing, such as positions of public waste baskets. Also, the data does not conform to a hard standard and important information can be described in various ways. Thus it is necessary to extract the routing data into a normalized format. This is done by the OSRM tool named extractor. It parses the contents of the exported OSM file and writes out a file with the suffix .osrm which contains the routing data, a file with the suffix .osrm.restrictions which contains restrictions to make certain turns during navigation, and, a file with the suffix .osrm.names which contains the names of all the roads.

Profiles are used during this process to determine what can be routed along, and what cannot (private roads, ...). In order to get a proper profile.lua, make a symbolic link being inside your build directory:

ln -s ../profiles/car.lua profile.lua

It might be also necessary to add a symlink to the profile-lib directory inside your build directory:

ln -s ../profiles/lib/

Suppose that you download an OSM data file with the name map.osm (an XML file with an .osm extension). You would extract this file using OSRM with the following command:

./osrm-extract map.osm

Extracting a file which contains data pertaining to the entire planet will take a few hours, mostly depending on the speed of the harddisks. On a Core i7 with 8GB RAM and (slow) 5400 RPM Samsung SATA hard disks it took about 65 minutes to do so from a PBF formatted planet. Please note that your mileage may vary and the faster your disks and processor the faster it will be. SSDs are certainly an advantage here. Most of the data is kept on disk, because RAM is scarce and extracting the data of a planet file will take up dozens of gigabytes of RAM. Currently about 35 GB or so. The tool is also able to handle bzip2 compressed files as well as PBF files: ./osrm-extract map.osm.bz2 and ./osrm-extract map.osm.pbf will work fine. PBF is the generally the better choice. Note that preprocessing the planet, i.e. the next step, is much more resource-hungry.

It's best to provide a swapfile so that the out-of-memory situations do not kill OSRM:

fallocate -l 100G /path/to/swapfile
chmod 600 /path/to/swapfile
mkswap /path/to/swapfile
swapon /path/to/swapfile

Note: this does not write 100 GB of zeros. Instead what it does is allocating a certain amount of blocks and just setting the 'uninitialized' flag on them, returning more or less immediately.

External memory accesses are handled by the stxxl library. Although you can run the code without any special configuration you might see a warning similar to [STXXL-ERRMSG] Warning: no config file found. Given you have enough free disk space, you can happily ignore the warning or create a config file called .stxxl in the same directory where the extractor tool sits. The following is taken from the stxxl manual:

You must define the disk configuration for an STXXL program in a file named '.stxxl' that must reside in the same directory where you execute the program. You can change the default file name for the configuration file by setting the enviroment variable STXXLCFG .

Each line of the configuration file describes a disk. A disk description uses the following format:

disk=full_disk_filename,capacity,access_method

Example: at the time of writing this (v4.9.1) the demo server uses 250GB stxxl file with the following configuration:

disk=/path/to/stxxl,250000,syscall

Parameters Description

• full_disk_filename : full disk filename. In order to access disks STXXL uses file access methods. Each disk is respresented as a file. If you have a disk that is mapped in unix to the path /mnt/disk0/, then the correct value for the full_disk_filename would be /mnt/disk0/some_file_name ,
  

• capacity : maximum capacity of the disk in megabytes
  

• access_method : STXXL has a number of different file access implementations, choose one of them:
  

•     syscall uses read and write system calls which perform disk transfers directly on user memory pages without superfluous copy (currently the fastest method)
  

•    mmap : performs disks transfers using mmap and munmap system calls
  

•     simdisk : simulates timings of the IBM IC35L080AVVA07 disk, full_disk_filename must point to a file on a RAM disk partition with sufficient space 
  

An example config file looks like this: disk=/tmp/stxxl,25000,syscall

It is generally a good idea to have the planet file on a separate partition since this avoids a large number of concurrent (read: slow, thanks Dennis S.) read/write disk accesses.

Creating the Hierarchy

The so-called Hierarchy is a lot of precomputed data, that enables the routing engine to find shortest path within short time. It is created by the the command-line

    ./osrm-contract map.osrm 

where map.osrm is the extracted road network and map.osrm.restrictions is a set of turn restrictions. Both are generated by the previous step. A nearest-neighbor data structure and a node map are created alongside the hierarchy. Once computation has finished, there should be another four files: map.osrm.hsgr (the Hierarchy), map.osrm.nodes (the nodemap), map.osrm.ramIndex (stage 1 index), map.osrm.fileIndex (stage 2 index).

See also the config files page for additional parameters to configure the extractor.

Running the Engine

If you run the command with the prefix of all the .osrm files

./osrm-routed map.osrm

it will pick up all dependent files - assuming they are in the same directory. Please note the actual .osrm file is only a itermediate file and is not needed for running the server. You can access the API on localhost:5000. See the server API for details on how to use it.

If you run

./osrm-routed --help

it will display all command-line options to manually specify any files.

Using Shared Memory

We just released OSRM v0.3.7 with huge improvements for running OSRM in a high-availability production environment. With all these changes, you should load all the shared memory directly into your RAM. It's as easy as:

./osrm-datastore /path/to/data.osrm

If there is insufficient available RAM (or not enough space configured), you will receive the following warning when loading data with osrm-datastore:

[warning] could not lock shared memory to RAM

In this case, data will be swapped to a cache on disk, and you will still be able to run queries. But note that caching comes at the price of disk latency. Again, consult the Wiki for instructions on how to configure your production environment. Starting the routing process and pointing it to shared memory is also very, very easy:

./osrm-routed --shared-memory=yes

See this for more information.

Run the test suite

OSRM comes with a number of tests using the cucumber framework. Further information on how to run the tests can be found here.

File overview

File type	Producer	Consumer	Description
.restrictions	osrm-extract	Temporary	Intermediate representation of turn restrictions
.osrm	osrm-extract	Temporary	Original filtered graph data (nodes and edges)
.nodes	osrm-extract	osrm-contract, osrm-routed	Original graph nodes (compressed geometry)
.enw	osrm-extract	osrm-contract	Contains the edge weights of the compressed EdgeBasedNodes
.ebg	osrm-extract	osrm-contract	Uncontracted edge based graph used as input for contractor
.edge_segment_lookup	osrm-extract	osrm-contract	Lookup file that translates between OSM ids and internal segment ids. Only created when --generate-edge-lookup is passed.
.edge_penalties	osrm-extract	osrm-contract	Lookup file contains static edge penalties. Only created when --generate-edge-lookup is passed.
.timestamp	osrm-extract	osrm-routed	Contains the timestamps of the OSM extract if the header is set.
.names	osrm-extract	osrm-routed	Street names and index
.edges	osrm-extract	osrm-routed	Original graph edges (compressed geometry)
.geometry	osrm-extract	osrm-routed	Geometry that was removed from the original graph
.ramIndex	osrm-extract	osrm-routed	Index of the R-Tree to to segment lookups
.fileIndex	osrm-extract	osrm-routed	Leaves of the R-Tree that are loaded on-demand to memory
.level	osrm-contract	osrm-contract	Cache of the contraction level, speeds up subsequent osrm-contract runs
.hsgr	osrm-contract	osrm-routed	Contraced edge-expanded graph (nodes and edges)
.core	osrm-contract	osrm-routed	Indicates which nodes of the graph have been contracted
.icd	osrm-extract	osrm-routed	Data used to generate representations of all intersections for routing steps.

Only the files consumed by osrm-routed need to be conserved after preprocessing.