This project is a Docker container for Consul. It's a slightly opinionated, pre-configured Consul Agent made specifically to work in the Docker ecosystem.
This version is forked from http://github.com/progrium/docker-consul and runs on the Raspberry Pi. Thanks to Jeff Lindsay for all his hard work. I am merely standing on the shoulders of giants.
The container is based on hypriot/rpi-golang and available on the Docker Index:
$ docker pull nimblestratus/rpi-consul
If you just want to run a single instance of Consul Agent to try out its functionality:
$ docker run -p 8400:8400 -p 8500:8500 -p 8600:53/udp -h node1 nimblestratus/rpi-consul -server -bootstrap
The Web UI can be enabled by adding the -ui-dir flag:
$ docker run -p 8400:8400 -p 8500:8500 -p 8600:53/udp -h node1 nimblestratus/rpi-consul -server -bootstrap -ui-dir /ui
We publish 8400 (RPC), 8500 (HTTP), and 8600 (DNS) so you can try all three interfaces. We also give it a hostname of node1. Setting the container hostname is the intended way to name the Consul Agent node.
Our recommended interface is HTTP using curl:
$ curl localhost:8500/v1/catalog/nodes
We can also use dig to interact with the DNS interface:
$ dig @0.0.0.0 -p 8600 node1.node.consul
However, if you install Consul on your host, you can use the CLI interact with the containerized Consul Agent:
$ consul members
If you want to start a Consul cluster on a single host to experiment with clustering dynamics (replication, leader election), here is the recommended way to start a 3 node cluster.
Here we start the first node not with -bootstrap, but with -bootstrap-expect 3, which will wait until there are 3 peers connected before self-bootstrapping and becoming a working cluster.
$ docker run -d --name node1 -h node1 nimblestratus/rpi-consul -server -bootstrap-expect 3
We can get the container's internal IP by inspecting the container. We'll put it in the env var JOIN_IP.
$ JOIN_IP="$(docker inspect -f '{{.NetworkSettings.IPAddress}}' node1)"
Then we'll start node2 and tell it to join node1 using $JOIN_IP:
$ docker run -d --name node2 -h node2 nimblestratus/rpi-consul -server -join $JOIN_IP
Now we can start node3 the same way:
$ docker run -d --name node3 -h node3 nimblestratus/rpi-consul -server -join $JOIN_IP
We now have a real three node cluster running on a single host. Notice we've also named the containers after their internal hostnames / node names.
We haven't published any ports to access the cluster, but we can use that as an excuse to run a fourth agent node in "client" mode (dropping the -server). This means it doesn't participate in the consensus quorum, but can still be used to interact with the cluster. It also means it doesn't need disk persistence.
$ docker run -d -p 8400:8400 -p 8500:8500 -p 8600:53/udp --name node4 -h node4 nimblestratus/rpi-consul -join $JOIN_IP
Now we can interact with the cluster on those published ports and, if you want, play with killing, adding, and restarting nodes to see how the cluster handles it.
Setting up a real cluster on separate hosts is very similar to our single host cluster setup process, but with a few differences:
- We assume there is a private network between hosts. Each host should have an IP on this private network
- We're going to pass this private IP to Consul via the
-advertiseflag - We're going to publish all ports, including internal Consul ports (8300, 8301, 8302), on this IP
- We set up a volume at
/datafor persistence. As an example, we'll bind mount/mntfrom the host
Assuming we're on a host with a private IP of 10.0.1.1 and the IP of docker bridge docker0 is 172.17.42.1 we can start the first host agent:
$ docker run -d -h node1 -v /mnt:/data \
-p 10.0.1.1:8300:8300 \
-p 10.0.1.1:8301:8301 \
-p 10.0.1.1:8301:8301/udp \
-p 10.0.1.1:8302:8302 \
-p 10.0.1.1:8302:8302/udp \
-p 10.0.1.1:8400:8400 \
-p 10.0.1.1:8500:8500 \
-p 172.17.42.1:53:53/udp \
nimblestratus/rpi-consul -server -advertise 10.0.1.1 -bootstrap-expect 3
On the second host, we'd run the same thing, but passing a -join to the first node's IP. Let's say the private IP for this host is 10.0.1.2:
$ docker run -d -h node2 -v /mnt:/data \
-p 10.0.1.2:8300:8300 \
-p 10.0.1.2:8301:8301 \
-p 10.0.1.2:8301:8301/udp \
-p 10.0.1.2:8302:8302 \
-p 10.0.1.2:8302:8302/udp \
-p 10.0.1.2:8400:8400 \
-p 10.0.1.2:8500:8500 \
-p 172.17.42.1:53:53/udp \
nimblestratus/rpi-consul -server -advertise 10.0.1.2 -join 10.0.1.1
And the third host with an IP of 10.0.1.3:
$ docker run -d -h node3 -v /mnt:/data \
-p 10.0.1.3:8300:8300 \
-p 10.0.1.3:8301:8301 \
-p 10.0.1.3:8301:8301/udp \
-p 10.0.1.3:8302:8302 \
-p 10.0.1.3:8302:8302/udp \
-p 10.0.1.3:8400:8400 \
-p 10.0.1.3:8500:8500 \
-p 172.17.42.1:53:53/udp \
nimblestratus/rpi-consul -server -advertise 10.0.1.3 -join 10.0.1.1
That's it! Once this last node connects, it will bootstrap into a cluster. You now have a working cluster running in production on a private network.
Since the docker run command to start in production is so long, a command is available to generate this for you. Running with cmd:run <advertise-ip>[::<join-ip>[::client]] [docker-run-args...] will output an opinionated, but customizable docker run command you can run in a subshell. For example:
$ docker run --rm nimblestratus/rpi-consul cmd:run 10.0.1.1 -d
Outputs:
eval docker run --name consul -h $HOSTNAME \
-p 10.0.1.1:8300:8300 \
-p 10.0.1.1:8301:8301 \
-p 10.0.1.1:8301:8301/udp \
-p 10.0.1.1:8302:8302 \
-p 10.0.1.1:8302:8302/udp \
-p 10.0.1.1:8400:8400 \
-p 10.0.1.1:8500:8500 \
-p 172.17.42.1:53:53/udp \
-d \
nimblestratus/rpi-consul -server -advertise 10.0.1.1 -bootstrap-expect 3
By design, it will set the hostname of the container to your host hostname, it will name the container consul (though this can be overridden), it will bind port 53 to the Docker bridge, and the rest of the ports on the advertise IP. If no join IP is provided, it runs in -bootstrap-expect mode with a default of 3 expected peers. Here is another example, specifying a join IP and setting more docker run arguments:
$ docker run --rm nimblestratus/rpi-consul cmd:run 10.0.1.1::10.0.1.2 -d -v /mnt:/data
Outputs:
eval docker run --name consul -h $HOSTNAME \
-p 10.0.1.1:8300:8300 \
-p 10.0.1.1:8301:8301 \
-p 10.0.1.1:8301:8301/udp \
-p 10.0.1.1:8302:8302 \
-p 10.0.1.1:8302:8302/udp \
-p 10.0.1.1:8400:8400 \
-p 10.0.1.1:8500:8500 \
-p 172.17.42.1:53:53/udp \
-d -v /mnt:/data \
nimblestratus/rpi-consul -server -advertise 10.0.1.1 -join 10.0.1.2
You may notice it lets you only run with bootstrap-expect or join, not both. Using cmd:run assumes you will be bootstrapping with the first node and expecting 3 nodes. You can change the expected peers before bootstrap by setting the EXPECT environment variable.
To use this convenience, you simply wrap the cmd:run output in a subshell. Run this to see it work:
$ $(docker run --rm nimblestratus/rpi-consul cmd:run 127.0.0.1 -it)
Client nodes allow you to keep growing your cluster without impacting the performance of the underlying gossip protocol (they proxy requests to one of the server nodes and so are stateless).
To boot a client node using the runner command, append the string ::client onto the <advertise-ip>::<join-ip> argument. For example:
$ docker run --rm nimblestratus/rpi-consul cmd:run 10.0.1.4::10.0.1.2::client -d
Would create the same output as above but without the -server consul argument.
Consul lets you specify a shell script to run for health checks, similar to Nagios. As a container, those scripts run inside this container environment which is a minimal Busybox environment with bash and curl. For some, this is fairly limiting, so I've added some built-in convenience scripts to properly do health checking in a Docker system.
These all require you to mount the host's Docker socket to /var/run/docker.sock when you run the Consul container.
check-http <container-id> <port> <path> [curl-args...]
This utility performs curl based HTTP health checking given a container ID or name, an internal port (what the service is actually listening on inside the container) and a path. You can optionally provide extra arguments to curl.
The HTTP request is done in a separate ephemeral container that is attached to the target container's network namespace. The utility automatically determines the internal Docker IP to run the request against. A successful request will output the response headers into Consul. An unsuccessful request will output the reason the request failed and set the check to critical. By default, curl runs with --retry 2 to cover local transient errors.
check-cmd <container-id> <port> <command...>
This utility performs the specified command in a separate ephemeral container based on the target container's image that is attached to that container's network namespace. Very often, this is expected to be a health check script, but can be anything that can be run as a command on this container image. For convenience, an environment variable SERVICE_ADDR is set with the internal Docker IP and port specified here.
The above health check utilities require the Docker binary, so it's already built-in to the container. If neither of the above fit your needs, and the container environment is too limiting, you can perform Docker operations directly to perform any containerized health check.
This container was designed assuming you'll be using it for DNS on your other containers. So it listens on port 53 inside the container to be more compatible and accessible via linking. It also has DNS recursive queries enabled, using the Google 8.8.8.8 nameserver.
When running with cmd:run, it publishes the DNS port on the Docker bridge. You can use this with the --dns flag in docker run, or better yet, use it with the Docker daemon options. Here is a command you can run on Ubuntu systems that will tell Docker to use the bridge IP for DNS, otherwise use Google DNS, and use service.consul as the search domain.
$ echo "DOCKER_OPTS='--dns 172.17.42.1 --dns 8.8.8.8 --dns-search service.consul'" >> /etc/default/docker
Although you can extend this image to add configuration files to define services and checks, this container was designed for environments where services and checks can be configured at runtime via the HTTP API.
It's recommended you keep your check logic simple, such as using inline curl or ping commands. Otherwise, keep in mind the default shell is Bash, but you're running in Busybox.
If you absolutely need to customize startup configuration, you can extend this image by making a new Dockerfile based on this one and having a config directory containing config JSON files. They will be added to the image you build via ONBUILD hooks. You can also add packages with opkg. See docs on the Busybox image for more info.
When testing a cluster scenario, you may kill a container and restart it again on the same host and see that it has trouble re-joining the cluster.
There is an issue when you restart a node as a new container with the same published ports that will cause heartbeats to fail and the node will flap. This is an ARP table caching problem. If you wait about 3 minutes before starting again, it should work fine. You can also manually reset the cache.
BSD