Skip to content

Bare-metal NUCLEO-F401 (STM32) libraries I've made using CMSIS package

Notifications You must be signed in to change notification settings

nmanhas2/LIBRARIES_STM32F401

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

38 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Bare-metal STM32 Driver Libraries With Tests

Using this NUCLEO Dev-board: https://www.st.com/en/evaluation-tools/nucleo-f401re.html, and STM32CubeIDE without use of the provided HAL

This repo contains libraries within the Inc folders of each project that can be used for GPIO, UART, ADC, etc, functionalities for the STM32F401RE MCU. There are tests included within each project file, mostly using the on-board LED and button for this particular nucleo board. There is also the inclusion of an I2C LCD Display for the I2C test, I did have difficulty in determining how to get the bottom half of the LCD display working, hence why only the top 8 characters work (https://www.orientdisplay.com/wp-content/uploads/2019/10/AMC0802BR-B-Y6WFDY-I2C.pdf). Most of the tests should only be run one at a time.

Used this to obtain the header ARM package CMSIS header files needed: https://www.st.com/en/embedded-software/stm32cubef4.html. You only need Drivers -> CMSIS -> Device and Include folders (for whichever MCU you're using). Since this is intended STM32F4x MCU, I only included the necessary header files for that MCU in the chip_headers/CMSIS folder.

If there are issues with detecting the header files, you may need to right click on the project and go to Properties:

image

Then go to C/C++ General -> Paths and Symbols:

image

Then click Add -> File system, and head to the chip_headers/CMSIS folder and select the Include folder, then do the same for the Device folder:

image

I've also included resources like the MCU datasheet, reference manual, etc., that I used.