services: add new service for fetching blocks from NeoFS

Close #3496

Co-authored-by: Anna Shaleva <[email protected]>
Signed-off-by: Ekaterina Pavlova <[email protected]>

config/protocol.testnet.yml

@@ -100,3 +100,15 @@ ApplicationConfiguration:
     Enabled: false
     Addresses:
       - ":2113"
+  NeoFSBlockFetcher:
+    Enabled: true
+    Addresses:
+      - st1.storage.fs.neo.org:8080
+    Timeout: 10m
+    DownloaderWorkersCount: 500
+    OIDBatchSize: 8000
+    BQueueSize: 16000 # must be larger than OIDBatchSize; highly recommended to be 2*OIDBatchSize or 3*OIDBatchSize
+    SkipIndexFilesSearch: false
+    ContainerID: "EPGuD26wYgQJbmDdVBoYoNZiMKHwFMJT3A5WqPjdUHxH"
+    BlockAttribute: "block"
+    OidAttribute: "oid"

docs/node-configuration.md

@@ -21,6 +21,7 @@ node-related settings described in the table below.
 | GarbageCollectionPeriod | `uint32` | 10000 | Controls MPT garbage collection interval (in blocks) for configurations with `RemoveUntraceableBlocks` enabled and `KeepOnlyLatestState` disabled. In this mode the node stores a number of MPT trees (corresponding to `MaxTraceableBlocks` and `StateSyncInterval`), but the DB needs to be clean from old entries from time to time. Doing it too often will cause too much processing overhead, doing it too rarely will leave more useless data in the DB. |
 | KeepOnlyLatestState | `bool` | `false` | Specifies if MPT should only store the latest state (or a set of latest states, see `P2PStateExchangeExtensions` section in the ProtocolConfiguration for details). If true, DB size will be smaller, but older roots won't be accessible. This value should remain the same for the same database. |  |
 | LogPath | `string` | "", so only console logging | File path where to store node logs. |
+| NeoFSBlockFetcher | [NeoFSBlockFetcher Configuration](#NeoFSBlockFetcher-Configuration) | | NeoFSBlockFetcher module configuration. See the [NeoFSBlockFetcher Configuration](#NeoFSBlockFetcher-Configuration) section for details. |
 | Oracle | [Oracle Configuration](#Oracle-Configuration) | | Oracle module configuration. See the [Oracle Configuration](#Oracle-Configuration) section for details. |
 | P2P | [P2P Configuration](#P2P-Configuration) | | Configuration values for P2P network interaction. See the [P2P Configuration](#P2P-Configuration) section for details. |
 | P2PNotary | [P2P Notary Configuration](#P2P-Notary-Configuration) | | P2P Notary module configuration. See the [P2P Notary Configuration](#P2P-Notary-Configuration) section for details. |
@@ -323,6 +324,40 @@ where:
 - `Path` is a path to wallet.
 - `Password` is a wallet password.
 
+### NeoFSBlockFetcher Configuration
+`NeoFSBlockFetcher` configuration section contains settings for NeoFS block fetcher
+module and has the following structure:
+```
+  NeoFSBlockFetcher:
+    Enabled: true
+    Addresses:
+      - st1.storage.fs.neo.org:8080
+    Timeout: 10m
+    DownloaderWorkersCount: 500
+    OIDBatchSize: 8000
+    BQueueSize: 16000
+    SkipIndexFilesSearch: false
+    ContainerID: "EPGuD26wYgQJbmDdVBoYoNZiMKHwFMJT3A5WqPjdUHxH"
+    BlockAttribute: "block"
+    OidAttribute: "oid"
+```
+where:
+- `Enabled` enables NeoFS block fetcher module.
+- `UnlockWallet` contains wallet settings, see
+  [Unlock Wallet Configuration](#Unlock-Wallet-Configuration) section for
+  structure details. Without this setting, the module will use new generated private key.
+- `Addresses` is a list of NeoFS storage nodes addresses.
+- `Timeout` is a timeout for a single request to NeoFS storage node.
+- `ContainerID` is a container ID to fetch blocks from.
+- `BlockAttribute` is an attribute name of NeoFS object that contains block data.
+- `OidAttribute` is an attribute name of NeoFS object that contains OIDs of blocks objects.
+- `DownloaderWorkersCount` is a number of workers that download blocks from NeoFS.
+- `OIDBatchSize` is a number of OIDs to search and fetch from NeoFS in one request in case of SkipIndexFilesSearch=true.
+- `BQueueSize` is a size of the block queue. It must be larger than `OIDBatchSize` and
+  highly recommended to be 2*`OIDBatchSize` or 3*`OIDBatchSize`.
+- `SkipIndexFilesSearch` is a flag that allows skipping index files search in NeoFS
+  storage nodes and search for blocks directly. It is set to `false` by default.
+
 ## Protocol Configuration
 
 `ProtocolConfiguration` section of `yaml` node configuration file contains

go.mod

@@ -32,6 +32,7 @@ require (
 	golang.org/x/term v0.18.0
 	golang.org/x/text v0.14.0
 	golang.org/x/tools v0.19.0
+	google.golang.org/grpc v1.62.0
 	gopkg.in/yaml.v3 v3.0.1
 )
 
@@ -69,7 +70,6 @@ require (
 	golang.org/x/net v0.23.0 // indirect
 	golang.org/x/sys v0.18.0 // indirect
 	google.golang.org/genproto/googleapis/rpc v0.0.0-20240221002015-b0ce06bbee7c // indirect
-	google.golang.org/grpc v1.62.0 // indirect
 	google.golang.org/protobuf v1.33.0 // indirect
 	rsc.io/tmplfunc v0.0.3 // indirect
 )

pkg/config/application_config.go

@@ -23,12 +23,13 @@ type ApplicationConfiguration struct {
 	Pprof      BasicService `yaml:"Pprof"`
 	Prometheus BasicService `yaml:"Prometheus"`
 
-	Relay     bool                `yaml:"Relay"`
-	Consensus Consensus           `yaml:"Consensus"`
-	RPC       RPC                 `yaml:"RPC"`
-	Oracle    OracleConfiguration `yaml:"Oracle"`
-	P2PNotary P2PNotary           `yaml:"P2PNotary"`
-	StateRoot StateRoot           `yaml:"StateRoot"`
+	Relay             bool                `yaml:"Relay"`
+	Consensus         Consensus           `yaml:"Consensus"`
+	RPC               RPC                 `yaml:"RPC"`
+	Oracle            OracleConfiguration `yaml:"Oracle"`
+	P2PNotary         P2PNotary           `yaml:"P2PNotary"`
+	StateRoot         StateRoot           `yaml:"StateRoot"`
+		NeoFSBlockFetcher NeoFSBlockFetcher   `yaml:"NeoFSBlockFetcher"`
 }
 
 // EqualsButServices returns true when the o is the same as a except for services
@@ -141,3 +142,13 @@ func (a *ApplicationConfiguration) GetAddresses() ([]AnnounceableAddress, error)
 	}
 	return addrs, nil
 }
+
+// Validate checks ApplicationConfiguration for internal consistency and returns
+// an error if any invalid settings are found. This ensures that the application
+// configuration is valid and safe to use for further operations.
+func (a *ApplicationConfiguration) Validate() error {
+	if err := a.NeoFSBlockFetcher.Validate(); err != nil {
+		return fmt.Errorf("failed to validate NeoFSBlockFetcher section: %w", err)
+	}
+	return nil
+}

pkg/config/blockfetcher_config.go

@@ -0,0 +1,60 @@
+package config
+
+import (
+	"errors"
+	"fmt"
+	"time"
+
+	cid "github.com/nspcc-dev/neofs-sdk-go/container/id"
+)
+
+const (
+	DefaultTimeout                = 1 * time.Minute
+	DefaultOIDBatchSize           = 8000
+	DefaultDownloaderWorkersCount = 500
+)
+
+// NeoFSBlockFetcher represents the configuration for the NeoFS block fetcher service.
+type NeoFSBlockFetcher struct {
+	InternalService        `yaml:",inline"`
+	Timeout                time.Duration `yaml:"Timeout"`
+	ContainerID            string        `yaml:"ContainerID"`
+	Addresses              []string      `yaml:"Addresses"`
+	OIDBatchSize           int           `yaml:"OIDBatchSize"` // valid only for SkipIndexFilesSearch = true
+	BlockAttribute         string        `yaml:"BlockAttribute"`
+	OidAttribute           string        `yaml:"OidAttribute"`
+	HeaderAttribute        string        `yaml:"HeaderAttribute"`
+	DownloaderWorkersCount int           `yaml:"DownloaderWorkersCount"`
+	BQueueSize             int           `yaml:"BQueueSize"`
+	SkipIndexFilesSearch   bool          `yaml:"SkipIndexFilesSearch"`
+}
+
+// Validate checks NeoFSBlockFetcher for internal consistency and ensures
+// that all required fields are properly set. It returns an error if the
+// configuration is invalid or if the ContainerID cannot be properly decoded.
+func (cfg *NeoFSBlockFetcher) Validate() error {
+	if !cfg.Enabled {
+		return nil
+	}
+	if cfg.ContainerID == "" {
+		return errors.New("container ID is not set")
+	}
+	var containerID cid.ID
+	err := containerID.DecodeString(cfg.ContainerID)
+	if err != nil {
+		return fmt.Errorf("invalid container ID: %w", err)
+	}
+	if cfg.Timeout == 0 {
+		cfg.Timeout = DefaultTimeout
+	}
+	if cfg.OIDBatchSize == 0 {
+		cfg.OIDBatchSize = DefaultOIDBatchSize
+	}
+	if cfg.DownloaderWorkersCount <= 0 {
+		cfg.DownloaderWorkersCount = DefaultDownloaderWorkersCount
+	}
+	if cfg.BQueueSize < cfg.OIDBatchSize {
+		return fmt.Errorf("BQueueSize (%d) is lower than OIDBatchSize (%d)", cfg.BQueueSize, cfg.OIDBatchSize)
+	}
+	return nil
+}

pkg/config/config.go

@@ -116,6 +116,10 @@ func LoadFile(configPath string, relativePath ...string) (Config, error) {
 	if err != nil {
 		return Config{}, err
 	}
+	err = config.ApplicationConfiguration.Validate()
+	if err != nil {
+		return Config{}, err
+	}
 
 	return config, nil
 }

pkg/network/server.go

@@ -28,6 +28,7 @@ import (
 	"github.com/nspcc-dev/neo-go/pkg/network/capability"
 	"github.com/nspcc-dev/neo-go/pkg/network/extpool"
 	"github.com/nspcc-dev/neo-go/pkg/network/payload"
+	"github.com/nspcc-dev/neo-go/pkg/services/blockfetcher"
 	"github.com/nspcc-dev/neo-go/pkg/util"
 	"go.uber.org/zap"
 )
@@ -103,10 +104,12 @@ type (
 		chain             Ledger
 		bQueue            *bqueue.Queue
 		bSyncQueue        *bqueue.Queue
+		bFetcherQueue     *bqueue.Queue
 		mempool           *mempool.Pool
 		notaryRequestPool *mempool.Pool
 		extensiblePool    *extpool.Pool
 		notaryFeer        NotaryFeer
+		blockFetcher      *blockfetcher.Service
 
 		serviceLock    sync.RWMutex
 		services       map[string]Service
@@ -133,6 +136,7 @@ type (
 		runFin              chan struct{}
 		broadcastTxFin      chan struct{}
 		runProtoFin         chan struct{}
+		blockFetcherFin     chan struct{}
 
 		transactions chan *transaction.Transaction
 
@@ -171,6 +175,7 @@ func newServerFromConstructors(config ServerConfig, chain Ledger, stSync StateSy
 	newTransport func(*Server, string) Transporter,
 	newDiscovery func([]string, time.Duration, Transporter) Discoverer,
 ) (*Server, error) {
+	var err error
 	if log == nil {
 		return nil, errors.New("logger is a required parameter")
 	}
@@ -182,28 +187,30 @@ func newServerFromConstructors(config ServerConfig, chain Ledger, stSync StateSy
 	}
 
 	s := &Server{
-		ServerConfig:   config,
-		chain:          chain,
-		id:             randomID(),
-		config:         chain.GetConfig().ProtocolConfiguration,
-		quit:           make(chan struct{}),
-		relayFin:       make(chan struct{}),
-		runFin:         make(chan struct{}),
-		broadcastTxFin: make(chan struct{}),
-		runProtoFin:    make(chan struct{}),
-		register:       make(chan Peer),
-		unregister:     make(chan peerDrop),
-		handshake:      make(chan Peer),
-		txInMap:        make(map[util.Uint256]struct{}),
-		peers:          make(map[Peer]bool),
-		mempool:        chain.GetMemPool(),
-		extensiblePool: extpool.New(chain, config.ExtensiblePoolSize),
-		log:            log,
-		txin:           make(chan *transaction.Transaction, 64),
-		transactions:   make(chan *transaction.Transaction, 64),
-		services:       make(map[string]Service),
-		extensHandlers: make(map[string]func(*payload.Extensible) error),
-		stateSync:      stSync,
+		ServerConfig:    config,
+		chain:           chain,
+		id:              randomID(),
+		config:          chain.GetConfig().ProtocolConfiguration,
+		quit:            make(chan struct{}),
+		relayFin:        make(chan struct{}),
+		runFin:          make(chan struct{}),
+		broadcastTxFin:  make(chan struct{}),
+		runProtoFin:     make(chan struct{}),
+		blockFetcherFin: make(chan struct{}, 1),
+		register:        make(chan Peer),
+		unregister:      make(chan peerDrop),
+		handshake:       make(chan Peer),
+		txInMap:         make(map[util.Uint256]struct{}),
+		peers:           make(map[Peer]bool),
+		mempool:         chain.GetMemPool(),
+		extensiblePool:  extpool.New(chain, config.ExtensiblePoolSize),
+		log:             log,
+		txin:            make(chan *transaction.Transaction, 64),
+		transactions:    make(chan *transaction.Transaction, 64),
+		services:        make(map[string]Service),
+		extensHandlers:  make(map[string]func(*payload.Extensible) error),
+		stateSync:       stSync,
+
 	}
 	if chain.P2PSigExtensionsEnabled() {
 		s.notaryFeer = NewNotaryFeer(chain)
@@ -219,7 +226,13 @@ func newServerFromConstructors(config ServerConfig, chain Ledger, stSync StateSy
 	}, bqueue.CacheSize, updateBlockQueueLenMetric, bqueue.NonBlocking)
 
 	s.bSyncQueue = bqueue.New(s.stateSync, log, nil, bqueue.CacheSize, updateBlockQueueLenMetric, bqueue.NonBlocking)
-
+	s.bFetcherQueue = bqueue.New(chain, log, nil, s.NeoFSBlockFetcherCfg.BQueueSize, updateBlockQueueLenMetric, bqueue.Blocking)
+	s.blockFetcher, err = blockfetcher.New(chain, s.NeoFSBlockFetcherCfg, log, s.bFetcherQueue.PutBlock, func() {
+		close(s.blockFetcherFin)
+	})
+	if err != nil {
+		return nil, err
+	}
 	if s.MinPeers < 0 {
 		s.log.Info("bad MinPeers configured, using the default value",
 			zap.Int("configured", s.MinPeers),
@@ -295,6 +308,14 @@ func (s *Server) Start() {
 	go s.relayBlocksLoop()
 	go s.bQueue.Run()
 	go s.bSyncQueue.Run()
+	go s.bFetcherQueue.Run()
+	if s.ServerConfig.NeoFSBlockFetcherCfg.Enabled && s.blockFetcher != nil {
+		err := s.blockFetcher.Start()
+		if err != nil {
+			s.log.Error("NeoFS block fetcher service:", zap.Error(err))
+			s.blockFetcher.Shutdown()
+		}
+	}
 	for _, tr := range s.transports {
 		go tr.Accept()
 	}
@@ -319,6 +340,7 @@ func (s *Server) Shutdown() {
 	}
 	s.bQueue.Discard()
 	s.bSyncQueue.Discard()
+	s.bFetcherQueue.Discard()
 	s.serviceLock.RLock()
 	for _, svc := range s.services {
 		svc.Shutdown()
@@ -546,6 +568,9 @@ func (s *Server) run() {
 
 			s.discovery.RegisterGood(p)
 
+			s.tryInitStateSync()
+			s.tryStartServices()
+		case <-s.blockFetcherFin:
 			s.tryInitStateSync()
 			s.tryStartServices()
 		}
@@ -702,7 +727,7 @@ func (s *Server) IsInSync() bool {
 	var peersNumber int
 	var notHigher int
 
-	if s.stateSync.IsActive() {
+	if s.stateSync.IsActive() || s.blockFetcher.IsActive() {
 		return false
 	}
 
@@ -762,6 +787,9 @@ func (s *Server) handleVersionCmd(p Peer, version *payload.Version) error {
 
 // handleBlockCmd processes the block received from its peer.
 func (s *Server) handleBlockCmd(p Peer, block *block.Block) error {
+	if s.blockFetcher.IsActive() {
+		return nil
+	}
 	if s.stateSync.IsActive() {
 		return s.bSyncQueue.PutBlock(block)
 	}
@@ -782,6 +810,9 @@ func (s *Server) handlePing(p Peer, ping *payload.Ping) error {
 }
 
 func (s *Server) requestBlocksOrHeaders(p Peer) error {
+	if s.blockFetcher.IsActive() {
+		return nil
+	}
 	if s.stateSync.NeedHeaders() {
 		if s.chain.HeaderHeight() < p.LastBlockIndex() {
 			return s.requestHeaders(p)
@@ -1428,6 +1459,9 @@ func (s *Server) handleMessage(peer Peer, msg *Message) error {
 }
 
 func (s *Server) tryInitStateSync() {
+	if s.blockFetcher.IsActive() {
+		return
+	}
 	if !s.stateSync.IsActive() {
 		s.bSyncQueue.Discard()
 		return