ci: enhance pull_request workflow

.github/workflows/chart-lint-test.yml

@@ -1,16 +1,17 @@
 name: Chart Lint and Test
 
-on:
-  push:
-    paths:
-      - 'deploy/helm/**'
-    branches:
-      - develop
-  pull_request:
-    paths:
-      - 'deploy/helm/**'
-    branches:
-      - develop
+#on:
+#  push:
+#    paths:
+#      - 'deploy/helm/**'
+#    branches:
+#      - develop
+#  pull_request:
+#    paths:
+#      - 'deploy/helm/**'
+#    branches:
+#      - 'develop'
+#      - 'release/**'
 
 jobs:
   lint-test:

.github/workflows/pull_request.yml

@@ -1,29 +1,14 @@
-# Copyright 2020 The OpenEBS Authors. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: ci
+name: Pull Request CI
 
 on:
   pull_request:
     branches:
       - 'develop'
-      - 'v*'
+      - 'release/**'
     paths-ignore:
       - '*.md'
       - 'BUILDMETA'
       - 'changelogs/**'
-      - 'deploy/helm/**'
       - 'docs/**'
       - 'design/**'
       - 'LICENSE'
@@ -35,6 +20,8 @@ jobs:
     steps:
       - name: Checkout
         uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
 
       - name: Set up Go 1.19
         uses: actions/setup-go@v5
@@ -62,7 +49,21 @@ jobs:
           path: '.'
           pattern: '*.sh'
 
-  unit-test:
+      - uses: cachix/install-nix-action@v22
+      - uses: rrbutani/[email protected]
+        with:
+            file: shell.nix
+
+      - name: Check if the chart follows a valid semver version
+        run: |
+          branch_name="${{ github.event.pull_request.base.ref }}"
+          ./scripts/validate-chart-version.sh --branch $branch_name
+
+      - name: Run chart-testing lint
+        run: |
+          ct lint --config ct.yaml
+
+  unit-tests:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
@@ -85,8 +86,8 @@ jobs:
           name: coverage-$(date +%s)
           flags: unittests
 
-  bdd-test:
-    needs: ['unit-test']
+  bdd-tests:
+    needs: ['unit-tests']
     runs-on: ubuntu-latest
     strategy:
       fail-fast: true
@@ -95,13 +96,21 @@ jobs:
     steps:
       - name: Checkout
         uses: actions/checkout@v4
+
+      - uses: cachix/install-nix-action@v22
+      - uses: rrbutani/[email protected]
+        with:
+          file: shell.nix
 
       - name: Set up Go 1.19
         uses: actions/setup-go@v5
         with:
           go-version: 1.19.9
           cache: false
 
+      - name: Build images locally
+        run: make lvm-driver-image || exit 1;
+
       - name: Setup Minikube-Kubernetes
         uses: medyagh/setup-minikube@latest
         with:
@@ -112,8 +121,10 @@ jobs:
           cni: calico
           start-args: '--install-addons=false'
 
-      - name: Build images locally
-        run: make lvm-driver-image || exit 1;
+      - name: Setting environment variables
+        run: |
+          echo "KUBECONFIG=$HOME/.kube/config" >> $GITHUB_ENV
+          echo "OPENEBS_NAMESPACE=openebs" >> $GITHUB_ENV
 
       - name: bootstrap
         run: make bootstrap
@@ -131,7 +142,7 @@ jobs:
 
   csi-driver:
     runs-on: ubuntu-latest
-    needs: ['lint', 'unit-test', 'bdd-test']
+    needs: ['lint', 'unit-tests', 'bdd-tests']
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -144,8 +155,6 @@ jobs:
       - name: Set up Docker Buildx
         id: buildx
         uses: docker/setup-buildx-action@v3
-        with:
-          version: v0.13.1
 
       - name: Build
         uses: docker/build-push-action@v5
@@ -154,5 +163,3 @@ jobs:
           file: ./buildscripts/lvm-driver/Dockerfile.buildx
           push: false
           platforms: linux/amd64, linux/arm64
-          tags: |
-            openebs/lvm-driver:ci

.github/workflows/release-charts.yml

@@ -1,11 +1,11 @@
 name: Release Charts
 
-on:
-  push:
-    paths:
-      - 'deploy/helm/**'
-    branches:
-      - develop
+#on:
+#  push:
+#    paths:
+#      - 'deploy/helm/**'
+#    branches:
+#      - develop
 
 jobs:
   release:

.gitignore

@@ -6,3 +6,4 @@ tags
 *.swo
 *.swn
 *.idea
+*.test

Makefile

@@ -52,9 +52,12 @@ ifeq (${DBUILD_SITE_URL}, )
   export DBUILD_SITE_URL
 endif
 
+# Set the path to the Chart.yaml file
+ROOT_DIR:=$(dir $(realpath $(firstword $(MAKEFILE_LIST))))
+CHART_YAML:=${ROOT_DIR}/deploy/helm/charts/Chart.yaml
 
 ifeq (${IMAGE_TAG}, )
-  IMAGE_TAG = ci
+  IMAGE_TAG := $(shell awk -F': ' '/^version:/ {print $$2}' $(CHART_YAML))
   export IMAGE_TAG
 endif
 

ci/ci-test.sh

@@ -1,27 +1,10 @@
 #!/usr/bin/env bash
-# Copyright 2021 The OpenEBS Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 
 set -e
 
-LVM_OPERATOR="$(realpath deploy/lvm-operator.yaml)"
 SNAP_CLASS="$(realpath deploy/sample/lvmsnapclass.yaml)"
 
-export LVM_NAMESPACE="openebs"
 export TEST_DIR="tests"
-export NAMESPACE="kube-system"
 
 # allow override
 if [ -z "${KUBECONFIG}" ]
@@ -46,7 +29,7 @@ cleanup_foreign_lvmvg() {
   if [ -f /tmp/openebs_ci_foreign_disk.img ]
   then
     sudo vgremove foreign_lvmvg --config="${FOREIGN_LVM_CONFIG}" -y || true
-    rm /tmp/openebs_ci_foreign_disk.img
+    sudo rm /tmp/openebs_ci_foreign_disk.img
   fi
   cleanup_loopdev
 }
@@ -60,8 +43,8 @@ cleanup() {
 
   kubectl delete pvc -n openebs lvmpv-pvc
   kubectl delete -f "${SNAP_CLASS}"
-  kubectl delete -f "${LVM_OPERATOR}"
 
+  helm uninstall lvm-localpv -n "$OPENEBS_NAMESPACE" || true
   # always return true
   return 0
 }
@@ -87,29 +70,30 @@ sudo sed -i '/^[^#]*thin_pool_autoextend_percent/ s/= .*/= 20/' /etc/lvm/lvm.con
 
 # Prepare env for running BDD tests
 # Minikube is already running
-kubectl apply -f "${LVM_OPERATOR}"
+
+helm install lvm-localpv ./deploy/helm/charts -n "$OPENEBS_NAMESPACE" --create-namespace --set lvmPlugin.pullPolicy=Never --set analytics.enabled=false
 kubectl apply -f "${SNAP_CLASS}"
 
 dumpAgentLogs() {
   NR=$1
-  AgentPOD=$(kubectl get pods -l app=openebs-lvm-node -o jsonpath='{.items[0].metadata.name}' -n "$NAMESPACE")
-  kubectl describe po "$AgentPOD" -n "$NAMESPACE"
+  AgentPOD=$(kubectl get pods -l app=openebs-lvm-node -o jsonpath='{.items[0].metadata.name}' -n "$OPENEBS_NAMESPACE")
+  kubectl describe po "$AgentPOD" -n "$OPENEBS_NAMESPACE"
   printf "\n\n"
-  kubectl logs --tail="${NR}" "$AgentPOD" -n "$NAMESPACE" -c openebs-lvm-plugin
+  kubectl logs --tail="${NR}" "$AgentPOD" -n "$OPENEBS_NAMESPACE" -c openebs-lvm-plugin
   printf "\n\n"
 }
 
 dumpControllerLogs() {
   NR=$1
-  ControllerPOD=$(kubectl get pods -l app=openebs-lvm-controller -o jsonpath='{.items[0].metadata.name}' -n "$NAMESPACE")
-  kubectl describe po "$ControllerPOD" -n "$NAMESPACE"
+  ControllerPOD=$(kubectl get pods -l app=openebs-lvm-controller -o jsonpath='{.items[0].metadata.name}' -n "$OPENEBS_NAMESPACE")
+  kubectl describe po "$ControllerPOD" -n "$OPENEBS_NAMESPACE"
   printf "\n\n"
-  kubectl logs --tail="${NR}" "$ControllerPOD" -n "$NAMESPACE" -c openebs-lvm-plugin
+  kubectl logs --tail="${NR}" "$ControllerPOD" -n "$OPENEBS_NAMESPACE" -c openebs-lvm-plugin
   printf "\n\n"
 }
 
 isPodReady(){
-  [ "$(kubectl get po "$1" -o 'jsonpath={.status.conditions[?(@.type=="Ready")].status}' -n "$NAMESPACE")" = 'True' ]
+  [ "$(kubectl get po "$1" -o 'jsonpath={.status.conditions[?(@.type=="Ready")].status}' -n "$OPENEBS_NAMESPACE")" = 'True' ]
 }
 
 isDriverReady(){
@@ -124,7 +108,7 @@ waitForLVMDriver() {
 
   i=0
   while [ "$i" -le "$period" ]; do
-    lvmDriver="$(kubectl get pods -l role=openebs-lvm -o 'jsonpath={.items[*].metadata.name}' -n "$NAMESPACE")"
+    lvmDriver="$(kubectl get pods -l role=openebs-lvm -o 'jsonpath={.items[*].metadata.name}' -n "$OPENEBS_NAMESPACE")"
     if isDriverReady "$lvmDriver"; then
       return 0
     fi
@@ -143,7 +127,7 @@ waitForLVMDriver
 
 cd $TEST_DIR
 
-kubectl get po -n "$NAMESPACE"
+kubectl get po -n "$OPENEBS_NAMESPACE"
 
 set +e
 

ct.yaml

@@ -5,3 +5,4 @@ chart-dirs:
   - deploy/helm
 helm-extra-args: --timeout=500s
 validate-maintainers: false
+check-version-increment: false

deploy/helm/charts/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
 name: lvm-localpv
 description: CSI Driver for dynamic provisioning of LVM Persistent Local Volumes.
-version: 1.6.0
-appVersion: 1.6.0
+version: 1.7.0-develop
+appVersion: 1.7.0-develop
 icon: https://raw.githubusercontent.com/cncf/artwork/master/projects/openebs/icon/color/openebs-icon-color.png
 home: https://openebs.io/
 keywords:
@@ -16,5 +16,5 @@ sources:
 - https://github.com/openebs/lvm-localpv
 dependencies:
   - name: crds
-    version: 1.6.0
+    version: 1.7.0-develop
     condition: crds.enabled

deploy/helm/charts/README.md

@@ -38,7 +38,7 @@ $ helm install [RELEASE_NAME] openebs-lvmlocalpv/lvm-localpv --namespace [NAMESP
 
 
 **Note:** If moving from the operator to helm
-- Make sure the namespace provided in the helm install command is same as `LVM_NAMESPACE` (by default it is `openebs`) env in the controller deployment.
+- Make sure the namespace provided in the helm install command is same as `OPENEBS_NAMESPACE` (by default it is `openebs`) env in the controller deployment.
 - Before installing, clean up the stale deployment and daemonset from `kube-system` namespace using the below commands
 ```sh
 kubectl delete deployment openebs-lvm-controller -n kube-system
@@ -92,7 +92,7 @@ helm install openebs-lvmlocalpv openebs-lvmlocalpv/lvm-localpv --namespace opene
 | `lvmPlugin.image.registry`                          | Registry for openebs-lvm-plugin image                                            | `""`                                    |
 | `lvmPlugin.image.repository`                        | Image repository for openebs-lvm-plugin                                          | `openebs/lvm-driver`                    |
 | `lvmPlugin.image.pullPolicy`                        | Image pull policy for openebs-lvm-plugin                                         | `IfNotPresent`                          |
-| `lvmPlugin.image.tag`                               | Image tag for openebs-lvm-plugin                                                 | `1.6.0`                                 |
+| `lvmPlugin.image.tag`                               | Image tag for openebs-lvm-plugin                                                 | `1.7.0-develop`                                 |
 | `lvmPlugin.metricsPort`                             | The TCP port number used for exposing lvm-metrics                                | `9500`                                  |
 | `lvmPlugin.allowedTopologies`                       | The comma seperated list of allowed node topologies                              | `kubernetes.io/hostname,`               |
 | `lvmNode.driverRegistrar.image.registry`            | Registry for csi-node-driver-registrar image                                     | `registry.k8s.io/`                      |

deploy/helm/charts/charts/crds/Chart.yaml

@@ -1,4 +1,4 @@
 apiVersion: v2
 name: crds
-version: 1.6.0
+version: 1.7.0-develop
 description: A Helm chart that collects CustomResourceDefinitions (CRDs) from lvm-localpv.

deploy/helm/charts/templates/_helpers.tpl

@@ -60,7 +60,7 @@ Define meta labels for openebs lvm-localpv components
 {{- define "lvmlocalpv.common.metaLabels" -}}
 chart: {{ template "lvmlocalpv.chart" . }}
 heritage: {{ .Release.Service }}
-openebs.io/version: {{ .Values.release.version | quote }}
+openebs.io/version: {{ .Chart.AppVersion | quote }}
 role: {{ .Values.role | quote }}
 {{- end -}}
 

deploy/helm/charts/templates/lvm-controller.yaml

@@ -109,7 +109,7 @@ spec:
               value: controller
             - name: OPENEBS_CSI_ENDPOINT
               value: unix:///var/lib/csi/sockets/pluginproxy/csi.sock
-            - name: LVM_NAMESPACE
+            - name: OPENEBS_NAMESPACE
               valueFrom:
                 fieldRef:
                   fieldPath: metadata.namespace

deploy/helm/charts/templates/lvm-node.yaml

@@ -91,7 +91,7 @@ spec:
               value: unix:///plugin/csi.sock
             - name: OPENEBS_NODE_DRIVER
               value: agent
-            - name: LVM_NAMESPACE
+            - name: OPENEBS_NAMESPACE
               valueFrom:
                 fieldRef:
                   fieldPath: metadata.namespace

deploy/helm/charts/values.yaml

@@ -1,8 +1,6 @@
 # Default values for openebs-lvmlocalpv.
 # This is a YAML-formatted file.
 # Declare variables to be passed into your templates.
-release:
-  version: "1.6.0"
 
 imagePullSecrets:
 # - name: "image-pull-secret"
@@ -151,7 +149,7 @@ lvmPlugin:
     repository: openebs/lvm-driver
     pullPolicy: IfNotPresent
     # Overrides the image tag whose default is the chart appVersion.
-    tag: 1.6.0
+    tag: 1.7.0-develop
   ioLimits:
     enabled: false
     containerRuntime: containerd