OpenXLA-specific changes

lib/Conversion/TritonGPUToLLVM/ElementwiseOpToLLVM.cpp

@@ -40,7 +40,8 @@ SmallVector<Value> reorderValues(const SmallVector<Value> &values, Type inType,
   auto ouEltTy = ouTensorTy.getElementType();
   if (inBitWidth == ouBitWidth)
     return values;
-  if (inBitWidth == 16 && ouBitWidth == 32) {
+  if ((inBitWidth == 16 && ouBitWidth == 32) ||
+      (inBitWidth == 32 && ouBitWidth == 16)) {
     SmallVector<Value> ret;
     for (unsigned i = 0; i < values.size(); i += 8) {
       ret.push_back(values[i]);

lib/Conversion/TritonGPUToLLVM/ViewOpToLLVM.cpp

@@ -87,8 +87,9 @@ struct ArithConstantSplatOpConversion
     // LLVM IR.
     if (type::isFloat8(elemType))
       elemType = rewriter.getIntegerType(8);
-    auto constOp = rewriter.create<LLVM::ConstantOp>(loc, elemType, val);
     auto typeConverter = getTypeConverter();
+    auto constOp = rewriter.create<LLVM::ConstantOp>(
+        loc, typeConverter->convertType(elemType), val);
     auto llStruct = SplatOpConversion::convertSplatLikeOp(
         elemType, op.getType(), constOp, typeConverter, rewriter, loc);
     rewriter.replaceOp(op, llStruct);

lib/Dialect/TritonGPU/IR/Dialect.cpp

@@ -2717,6 +2717,11 @@ struct CanonicalizeConvertFromAlloc
     auto convert = op.getSrc().getDefiningOp<ConvertLayoutOp>();
     if (!convert)
       return failure();
+    // LocalAllocOp lowering doesn't support going from DotOperandEncoding
+    // to SharedEncoding, so we want to keep this layout conversion.
+    if (mlir::isa<triton::gpu::DotOperandEncodingAttr>(
+            convert.getSrc().getType().getEncoding()))
+      return failure();
     rewriter.replaceOpWithNewOp<triton::gpu::LocalAllocOp>(
         op, op->getResult(0).getType(), convert.getSrc());
     return mlir::success();

lib/Dialect/TritonGPU/Transforms/AccelerateMatmul.cpp

@@ -153,6 +153,21 @@ static Value getSharedMemoryMMAOperand(Value v, mlir::PatternRewriter &rewriter,
   auto newType = MemDescType::get(argType.getShape(), argType.getElementType(),
                                   newLayout, SharedMemorySpace);
   rewriter.setInsertionPointAfterValue(arg);
+
+  // LocalAllocOp lowering doesn't support going from DotOperandEncoding
+  // to SharedEncoding.
+  if (auto dotOpEnc = mlir::dyn_cast<DotOperandEncodingAttr>(
+          argType.getEncoding())) {
+    // Create a layout conversion from DotOperandEncoding to BlockedEncoding
+    // then pass it to the LocalAllocOp.
+    auto newArgType = RankedTensorType::get(
+        argType.getShape(), argType.getElementType(), dotOpEnc.getParent());
+    auto dotOperandToBlockedCvt =
+        rewriter.create<ConvertLayoutOp>(arg.getLoc(), newArgType, arg);
+    return rewriter.create<LocalAllocOp>(arg.getLoc(), newType,
+                                              dotOperandToBlockedCvt);
+  }
+
   return rewriter.create<LocalAllocOp>(arg.getLoc(), newType, arg);
 }
 
@@ -162,6 +177,15 @@ class BlockedToMMA : public mlir::OpRewritePattern<DotOp> {
   mutable llvm::DenseMap<Operation *, unsigned> dotOpInstNs;
 
   static bool bwdFilter(Operation *op) {
+    // Dot operand layout assignment to Predicates are not currently supported
+    // during lowering from TritonGPU to LLVM in Triton for MMA cases. This
+    // condition limits visibility of the original bit-width so that predicate
+    // are not considered, hence, kwidth can never be = 32.
+    if (isa<arith::UIToFPOp>(op)) {
+      Type srcType = getElementTypeOrSelf(op->getOperand(0));
+      if (srcType.isInteger(1))
+        return false;
+    }
     return op->getNumOperands() == 1 &&
            (isa<FpToFpOp, BitcastOp, ConvertLayoutOp>(op) ||
             isPureUnaryInlineAsm(op) ||

lib/Dialect/TritonGPU/Transforms/OptimizeDotOperands.cpp

@@ -111,7 +111,8 @@ class HoistLayoutConversion : public OpRewritePattern<ConvertLayoutOp> {
                                 PatternRewriter &rewriter) const override {
     // Only consider conversions to dot operand.
     auto cvtTy = cast<RankedTensorType>(cvt.getType());
-    if (!isa<DotOperandEncodingAttr>(cvtTy.getEncoding()))
+    auto dotOpEnc = dyn_cast<DotOperandEncodingAttr>(cvtTy.getEncoding());
+    if (!dotOpEnc)
       return failure();
 
     auto src = cvt.getSrc().getDefiningOp();
@@ -126,6 +127,12 @@ class HoistLayoutConversion : public OpRewritePattern<ConvertLayoutOp> {
                 [](Type ty) { return isa<RankedTensorType>(ty); }))
       return failure();
 
+    // Quick handling to fix loading issues when computing the original
+    // bitwidth is unable to realize that there is a mixed-precision dot
+    // (hence kWidth = 1) but wants to hoist through the type conversion.
+    if (isa<arith::ExtFOp>(src) && dotOpEnc.getKWidth() == 1)
+        return failure();
+
     // Only consider custom conversions or arith ops.
     // TODO(jlebar): Is this too restrictive?
     if (!isa<FpToFpOp, BitcastOp>(src) && !isPureUnaryInlineAsm(src) &&
@@ -138,6 +145,14 @@ class HoistLayoutConversion : public OpRewritePattern<ConvertLayoutOp> {
     if (isa<arith::TruncIOp, arith::TruncFOp, arith::SelectOp>(src))
       return failure();
 
+    // Don't hoist through u1 -> fp casts as they aren't supported in
+    // ElementwiseOpToLLVM::reorderValues().
+    if (isa<arith::UIToFPOp>(src)) {
+      Type srcType = getElementTypeOrSelf(src->getOperand(0));
+      if (srcType.isInteger(1))
+        return failure();
+    }
+
     // Check that the conversion is transitively dependent on a load, and all
     // operations between the load and the conversion are layout preserving.
     //

lib/Dialect/TritonGPU/Transforms/Prefetch.cpp

@@ -140,8 +140,14 @@ Value Prefetcher::generatePrefetch(Value v, unsigned opIdx, bool isPrologue,
                                type.getMemorySpace()),
       v, offsetsVal);
 
+  // We need to assign kwidth to zero in the case where the parent layout is
+  // Blocked, otherwise the verifier emits a failure. The parent layout is
+  // Blocked only when Tensor Cores are disabled.
+  int kwidth = dyn_cast<triton::gpu::BlockedEncodingAttr>(dotEncoding)
+                   ? 0
+                   : prefetchWidth / 8;
   auto dotOperandEnc = triton::gpu::DotOperandEncodingAttr::get(
-      builder.getContext(), opIdx, dotEncoding, prefetchWidth / 8);
+      builder.getContext(), opIdx, dotEncoding, kwidth);
   Value prefetchSlice = builder.create<triton::gpu::LocalLoadOp>(
       v.getLoc(), RankedTensorType::get(shape, elementType, dotOperandEnc),
       newSmem);
@@ -187,6 +193,15 @@ LogicalResult Prefetcher::initialize() {
         break;
       if (!op->getResult(0).hasOneUse())
         break;
+      // Similar to issues faced in HoistLayoutConversion pattern in
+      // OptimizeDotOperands.cpp, we can't propagate through type casts from
+      // predicates as they aren't supported in Triton when encoded with dot_op
+      // layout.
+      if (isa<arith::UIToFPOp>(op)) {
+        Type srcType = getElementTypeOrSelf(op->getOperand(0));
+        if (srcType.isInteger(1))
+          break;
+      }
       rets.push_back(op->getOperand(0));
       if (auto cvt = dyn_cast<triton::gpu::LocalLoadOp>(op)) {
         foundConvertFromShared = true;

python/BUILD

@@ -0,0 +1,77 @@
+# NOTE: Do not depend on any targets from this directory,
+# but use //third_party/py/triton instead.
+
+load("@pybind11_bazel//:build_defs.bzl", "pybind_extension")
+
+package(
+    default_applicable_licenses = ["//:license"],
+    default_visibility = [
+        "//third_party/py/triton:__pkg__",
+        "@triton//python:__subpackages__",
+    ],
+)
+
+cc_library(
+    name = "passes",
+    hdrs = ["src/passes.h"],
+    includes = ["src"],
+    visibility = ["@triton//third_party:__subpackages__"],
+)
+
+pybind_extension(
+    name = "libtriton",
+    srcs = [
+        "src/interpreter.cc",
+        "src/ir.cc",
+        "src/llvm.cc",
+        "src/main.cc",
+        "src/passes.cc",
+    ],
+    copts = ["-DTRITON_BACKENDS_TUPLE=(nvidia)"],
+    deps = [
+        ":passes",
+        "@llvm-project//llvm:Core",
+        "@llvm-project//llvm:IPO",
+        "@llvm-project//llvm:IRReader",
+        "@llvm-project//llvm:InstCombine",
+        "@llvm-project//llvm:Linker",
+        "@llvm-project//llvm:MC",
+        "@llvm-project//llvm:Passes",
+        "@llvm-project//llvm:Support",
+        "@llvm-project//llvm:Target",
+        "@llvm-project//mlir:BuiltinToLLVMIRTranslation",
+        "@llvm-project//mlir:BytecodeWriter",
+        "@llvm-project//mlir:ControlFlowDialect",
+        "@llvm-project//mlir:ConversionPasses",
+        "@llvm-project//mlir:IR",
+        "@llvm-project//mlir:IndexDialect",
+        "@llvm-project//mlir:LLVMDialect",
+        "@llvm-project//mlir:LLVMIRTransforms",
+        "@llvm-project//mlir:LLVMToLLVMIRTranslation",
+        "@llvm-project//mlir:NVVMToLLVMIRTranslation",
+        "@llvm-project//mlir:Parser",
+        "@llvm-project//mlir:Pass",
+        "@llvm-project//mlir:Support",
+        "@llvm-project//mlir:ToLLVMIRTranslation",
+        "@llvm-project//mlir:Transforms",
+        "//:TritonAnalysis",
+        "//:TritonDialects",
+        "//:TritonGPUToLLVM",
+        "//:TritonGPUTransforms",
+        "//:TritonHSACO",
+        "//:TritonLLVMIR",
+        "//:TritonNvidiaGPUTransforms",
+        "//:TritonPTX",
+        "//:TritonToTritonGPU",
+        "//:TritonTools",
+        "//:TritonTransforms",
+        "@triton//third_party/nvidia:triton_nvidia",
+    ],
+)
+
+filegroup(
+    name = "files",
+    srcs = glob(
+        include = ["triton/**/*.py"],
+    ),
+)

python/src/ir.cc

@@ -1,4 +1,4 @@
-#include <pybind11/functional.h>
+#include <pybind11/functional.h>
 #include <pybind11/pybind11.h>
 #include <pybind11/stl.h>
 

python/test/regression/BUILD

@@ -0,0 +1,26 @@
+load("//third_party/py/pytest:pytest_defs.bzl", "pytest_multi_tests")
+
+package(
+    default_applicable_licenses = ["//:license"],
+)
+
+pytest_multi_tests(
+    name = "tests",
+    size = "large",
+    srcs = ["conftest.py"],
+    shard_count = 10,
+    tags = [
+        "config-cuda-only",
+        "requires-gpu-sm80",
+    ],
+    tests = glob(
+        include = ["test_*.py"],
+        exclude = [
+            "test_performance.py",  #TODO(b/321005767): fix failing test
+        ],
+    ),
+    deps = [
+        "//third_party/py/torch:pytorch",
+        "//third_party/py/triton",
+    ],
+)

python/test/regression/conftest.py

@@ -0,0 +1,12 @@
+# content of conftest.py
+
+import pytest
+
+
+def pytest_addoption(parser):
+    parser.addoption("--device", action="store", default='cuda')
+
+
+@pytest.fixture
+def device(request):
+    return request.config.getoption("--device")