USB/IP for Windows

• This project aims to support both a USB/IP server and a client on Windows platform.

Build

Notes

• Build is tested on Windows 10 x64 and the projects are configured for this target by default.
• x86/x64 platforms should be supported. However, we don't have an x86 setup for testing at the moment.
• For Windows 7 users, change usbip_stub and usbip_vhci projects' Target OS version to Windows 7.
  • Right-click on the project > Properties > Driver Settings > Target OS version > Windows 7

Build Tools

• Visual Studio 2019 Community(v142)
  • Build with VS 2017(v141) is also possible if platform toolset in setting is configured to v141
• Windows SDK 10.0.18362.0(recommended)
  • VS 2019(v142): requires >= 10.0.18xxx
  • VS 2017(v141): requires >= 10.0.17xxx
• Windows Driver Kit Windows 10, version 1903 (10.0.18362)
  • WDK 10.0.17134(1803), 10.0.17763(1809), 10.0.18346 are also tested

Build Process

• Open usbip_win.sln

• If VS 2017 is used, SDK version for userspace projects(usbip, usbip_common, usbipd, stubctl) should be adjusted.

• Set certificate driver signing for usbip_stub and usbip_vhci projects.

  • Right-click on the project > Properties > Driver Signing > Test Certificate
  • Browse to driver/usbip_test.pfx

• Build solution or desired project.

• All output files are created under {Debug,Release}/{x64,x86} folder

Install

Windows USB/IP server

• Prepare a linux machine as a USB/IP client

  • Tested on Ubuntu 16.04
  • Kernel 4.15.0-29 (USB/IP kernel module crash was observed on some other version)
  • # modprobe vhci-hcd

• Install USB/IP test certificate

  • Install driver/usbip_test.pfx (password: usbip)
  • Certificate should be installed into
    1. "Trusted Root Certification Authority" in "Local Computer" (not current user) and
    2. "Trusted Publishers" in "Local Computer" (not current user)

• Enable test signing

  • > bcdedit.exe /set TESTSIGNING ON
  • reboot the system to apply

• Copy usbip.exe, usbipd.exe, usb.ids, usbip_stub.sys, usbip_stub.inx into a folder in target machine

  • You can find usbip.exe, usbipd.exe, usbip_stub.sys in output folder after build or on release page.
  • userspace/usb.ids
  • driver/stub/usbip_stub.inx

• Find USB device id

  • You can get device id from usbip listing
    • > usbip.exe list -l
  • Bus id is always 1. So output from usbip.exe listing is shown as:

usbip.exe list -l
 - busid 1-59 (045e:00cb)
   Microsoft Corp. : Basic Optical Mouse v2.0 (045e:00cb)
 - busid 1-30 (80ee:0021)
   VirtualBox : USB Tablet (80ee:0021)

• Bind USB device to usbip stub

  • This command replaces an existing function driver with usbip stub driver
    • This should be executed using administrator privilege
    • usbip_stub.inx and usbip_stub.sys files should be in the same folder as usbip.exe
  • > usbip.exe bind -b 1-59

• Run usbipd.exe

  • > usbipd.exe -d -4
    • TCP port 3240 should be allowed by firewall

• Attach USB/IP device on linux machine

  • # usbip attach -r <usbip server ip> -b 1-59

Windows USB/IP client

• Prepare a linux machine as a USB/IP server

  • tested on Ubuntu 16.04 (Kernerl 4.15.0-29)
  • # modprobe usbip-host

• Run usbipd on a USB/IP server (Linux)

  • # usbipd -4 -d

• Install USB/IP test certificate

  • Install driver/usbip_test.pfx (password: usbip)
  • Certificate should be installed into
    1. "Trusted Root Certification Authority" in "Local Computer" (not current user) and
    2. "Trusted Publishers" in "Local Computer" (not current user)

• Enable test signing

  • > bcdedit.exe /set TESTSIGNING ON
  • reboot the system to apply

• Copy usbip.exe, usbip_vhci.sys, usbip_vhci.inf, usbip_vhci.cer, usbip_vhci.cat into a folder in target machine

  • You can find usbip.exe, usbip_vhci.sys, usbip_vhci.cer, usbip_vhci.inf in output folder after build or on release page.
  • usbip_vhci.cat can be found from usbip_vhci subfolder of output folder.
  • usbip_vhci.cer can be found in 0.0.1 release page.

• Install USB/IP VHCI driver

  • Command line install
    • Run PowerShell as an Administrator
    • call > usbip.exe install
  • Manual install
    • Start Device manager
    • Choose "Add Legacy Hardware" from the "Action" menu.
    • Select "Install the hardware that I manually select from the list".
    • Click "Next".
    • Click "Have Disk", click "Browse", choose the copied folder, and click "OK".
    • Click on the "USB/IP VHCI", and then click "Next".
    • Click Finish at "Completing the Add/Remove Hardware Wizard".

• Attach a remote USB device

  • > usbip.exe attach -r <usbip server ip> -b 2-2

Reporting Bug

• usbip-win is not yet ready for production use. We could find problems with more detailed logs.

How to get windows kernel log

• Set registry key to enable a debug filter
  • usbip-win uses DbgPrintEx API for kernel logging.
  • save following as .reg and run or manually insert a registry key
  • restart is required

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Debug Print Filter]
"IHVDRIVER"=dword:ffffffff

• Run a debugging log viewer program before you test

  • DebugView is a good tool to view the logs

• If your testing machine suffer from BSOD (blue screen on death), you should get it via remote debugging.

  • WinDbg on virtual machines would be good to get logs

How to get usbip forwarder log

• usbip-win transmits usbip packets via a userland forwarder.
  • forwarder log is the best to look into usbip packet internals.
• edit usbip_forward.c to define DEBUG_PDU at the head of the file
• compile usbip.exe or usbipd.exe
• debug_pdu.log is created at the path where an executable runs.

How to get linux kernel log

• Sometimes linux kernel log is required

# dmesg --follow | tee kernel_log.txt

---

_{This project was supported by Basic Science Research Program through the National Research Foundation of Korea(NRF) funded by the Ministry of Education(2016R1A6A3A11930295).}