CCPM: added comment to disable the telemetry after setup

Protocols_Details.md

@@ -263,6 +263,8 @@ Sending trainer channels to FrSky radios through telemetry does not work since t
 On a STM32 module and with a simple hardware modification, you can go around this limitation using CPPM to send the trainer information to the radio.
 For more information check the [CCPM Hardware Modification](/docs/CPPM_HW_Mod.md) page.
 
+Once your **setup** is **completed**, you **must check the "Disable Telemetry" box** to stop the Multi module from sending any data to the radio and therfore freeing up the line for the internal module.
+
 ## HEIGHT - *53*
 
 ### Sub_protocol 5CH - *0*
@@ -533,6 +535,8 @@ Sending trainer channels to FrSky radios through telemetry does not work since t
 On a STM32 module and with a simple hardware modification, you can go around this limitation using CPPM to send the trainer information to the radio.
 For more information check the [CCPM Hardware Modification](/docs/CPPM_HW_Mod.md) page.
 
+Once your **setup** is **completed**, you **must check the "Disable Telemetry" box** to stop the Multi module from sending any data to the radio and therfore freeing up the line for the internal module.
+
 ## E010R5 - *81*
 Models: E010 R5 red boards, JJRC H36, H36F and H36S
 
@@ -794,6 +798,8 @@ Sending trainer channels to FrSky radios through telemetry does not work since t
 On a STM32 module and with a simple hardware modification, you can go around this limitation using CPPM to send the trainer information to the radio.
 For more information check the [CCPM Hardware Modification](/docs/CPPM_HW_Mod.md) page.
 
+Once your **setup** is **completed**, you **must check the "Disable Telemetry" box** to stop the Multi module from sending any data to the radio and therfore freeing up the line for the internal module.
+
 ### Sub_protocol CloneTX - *1*
 This subprotocol makes a clone of a TX identifier transmitting FrSkyD/D8, FrSkyX/D16 v1.xxx FCC/LBT and FrSkyX/D16 v2.1.0 FCC/LBT.
 
@@ -1159,6 +1165,8 @@ Sending trainer channels to FrSky radios through telemetry does not work since t
 On a STM32 module and with a simple hardware modification, you can go around this limitation using CPPM to send the trainer information to the radio.
 For more information check the [CCPM Hardware Modification](/docs/CPPM_HW_Mod.md) page.
 
+Once your **setup** is **completed**, you **must check the "Disable Telemetry" box** to stop the Multi module from sending any data to the radio and therfore freeing up the line for the internal module.
+
 ## BUGSMINI - *42*
 Models: MJX Bugs 3 Mini and 3H