BLE Battery Management Systems for Home Assistant

This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant. After installation, no configuration is required. You can use the ESPHome Bluetooth proxy to extend the bluetooth coverage range. By using standard dashboard cards, it is easy to visualize the current state of remote batteries.

Features

• Zero configuration
• Autodetects compatible batteries
• Supports ESPHome Bluetooth proxy (BT proxy limit: 3 devices/proxy)
• Any number of batteries in parallel
• Native Home Assistant integration (works with all HA installation methods)

Supported Devices

• Offgridtec LiFePo4 Smart Pro: type A & B (show up as SmartBat-A… or SmartBat-B…)
• Daly BMS (show up as DL-…)
• JK BMS, Jikong, (HW version >=11 required)
• JBD BMS, Jiabaida
• Supervolt batteries (JBD BMS)
• Seplos v3 (show up as SP0…)

New device types can be easily added via the plugin architecture of this integration. See the contribution guidelines for details.

Provided Information

The integration provides the following information about the battery

Platform	Description	Unit	Details
sensor	SoC (state of charge)	%	range 100% (full) to 0% (battery empty)
sensor	stored energy	Wh	currently stored energy
sensor	voltage	V	overall battery voltage
sensor	current	A	positive for charging, negative for discharging
sensor	power	W	positive for charging, negative for discharging
sensor	temperature	°C
sensor	(remaining) runtime	s	remaining discharge time till SoC 0%
sensor	charge cycles	#
sensor	delta voltage	V	maximum difference between any two cells; individual cell voltage are available as attribute to this sensor
binary_sensor	battery charging indicator	bool	true if battery is charging

Installation

Automatic

Installation can be done using HACS by adding a custom repository.

Manual

1. Using the tool of choice open the directory (folder) for your HA configuration (where you find configuration.yaml).
2. If you do not have a custom_components directory (folder) there, you need to create it.
3. In the custom_components directory (folder) create a new folder called bms_ble.
4. Download all the files from the custom_components/bms_ble/ directory (folder) in this repository.
5. Place the files you downloaded in the new directory (folder) you created.
6. Restart Home Assistant
7. In the HA UI go to "Configuration" -> "Integrations" click "+" and search for "BLE Battery Management"

Outlook

• Add readout of individual cell voltages to be able to judge battery health
• Add option to only have temporary connections (lowers reliability, but helps running more devices via ESPHome Bluetooth proxy)
• Add further battery types from Home Assistant Add-on: BatMON

Troubleshooting

In case you have severe troubles,

• please enable the debug protocol for the integration,
• reproduce the issue,
• disable the log (Home Assistant will prompt you to download the log), and finally
• open an issue with a good description of what happened and attach the log.

FAQ

My sensors show unknown/unavailable at startup!

The polling interval is 30 seconds. So at startup it takes a few minutes to detect the battery and query the sensors. Then data will be available.

Can I have the runtime in human readable format (using days)?

Yes, you can use a template sensor or a card to show templates, e.g. Mushroom template card with the following template: {{ timedelta(seconds=int(states("sensor.smartbat_..._runtime"), 0)) }} results in e,g, 4 days, 4:20:00

I need a discharge sensor not the charging indicator, can I have that?

Sure, use, e.g. a threshold sensor based on the current to/from the battery. Negative means discharging, positiv is charging.

Thanks to

@downset, @gerritb, @Goaheadz

for helping with making the integration better.

References

• Home Assistant Add-on: BatMON
• Daly BMS: esp32-smart-bms-simulation
• Jikong BMS: esphome-jk-bms
• JBD BMS: esphome-jbd-bms