Script for examples added

.github/workflows/documentation.yaml

@@ -6,8 +6,8 @@ on:
     branches: [ "master", "dev" , "experimental" ]
 
 jobs:
-  tests:
-    name: documentation check
+  readme_check:
+    name: Readme check
     runs-on: ubuntu-latest
     steps:
     - name: Checkout code
@@ -16,3 +16,25 @@ jobs:
       run: python docs/script/make_doc.py README.tmp
     - name: Compare temp file with readme.rst
       run: diff -u --strip-trailing-cr README.rst README.tmp
+  hon_examples_check:
+    name: Check hon_example
+    runs-on: ubuntu-latest
+    steps:
+    - name: Checkout code
+      uses: actions/[email protected]
+    - name: Show current folder
+      run: ls
+    - name: Run script and save results
+      run: python docs/script/process_examples.py ../examples/hon_example.rst ../hon_example.tmp
+    - name: Compare temp file with hon_example.rst
+      run: diff -u --strip-trailing-cr docs/hon_example.rst docs/hon_example.tmp
+  smartair2_examples_check:
+    name: Check smartair2_example
+    runs-on: ubuntu-latest
+    steps:
+    - name: Checkout code
+      uses: actions/[email protected]
+    - name: Run script and save results
+      run: python docs/script/process_examples.py docs/examples/smartair2_example.rst docs/smartair2_example.tmp
+    - name: Compare temp file with smartair2_example.rst
+      run: diff -u --strip-trailing-cr docs/smartair2_example.rst docs/smartair2_example.tmp

.github/workflows/examples.yaml

@@ -22,13 +22,13 @@ jobs:
 
 
     steps:
-    - name: Checkout code
-      uses: actions/[email protected]
-    - name: Install esphome
-      run: pip3 install -U esphome
-    - name: Version esphome
-      run: esphome version
-    - name: Prepering test file
-      run: cat .base.yaml ${{ matrix.file }} > __test__.yaml
-    - name: Build ESPHome config
-      run: esphome compile __test__.yaml
+      - name: Checkout code
+        uses: actions/[email protected]
+      - name: Install esphome
+        run: pip3 install -U esphome
+      - name: Version esphome
+        run: esphome version
+      - name: Prepering test file
+        run: cat docs/examples/.base.yaml ${{ matrix.file }} > __test__.yaml
+      - name: Build ESPHome config
+        run: esphome compile __test__.yaml

README.rst

@@ -552,3 +552,4 @@ Additional information
 - `ESPHome Haier Climate Sensors <https://esphome.io/components/sensor/haier.html>`_
 - `ESPHome Haier Climate Binary Sensors <https://esphome.io/components/binary_sensor/haier.html>`_
 - `Esptool.py Documentation <https://docs.espressif.com/projects/esptool/en/latest/esp32/>`_
+- `Sniffing serial communication <./docs/sniffing_serial_communication.rst>`_

docs/examples/.base.yaml

@@ -13,3 +13,4 @@ logger:
 wifi:
   ssid: test_ssid
   password: test_pass
+

docs/examples/hon_example.rst

@@ -0,0 +1,12 @@
+Example of climate configuration for hOn protocol
+=================================================
+
+Configuration of your climate will depend on capabilities specific model.
+
+Minimal configuration will look like this:
+
+.. example_yaml:: examples/min-hon.yaml
+
+Maximum configuration witch will use all possible options will look like this:
+
+.. example_yaml:: examples/max-hon.yaml

docs/examples/max-smartair2.yaml

@@ -1,4 +1,4 @@
-uart:
+uart:
   baud_rate: 9600
   tx_pin: 17
   rx_pin: 16

docs/examples/smartair2_example.rst

@@ -0,0 +1,12 @@
+Example of climate configuration for smartair2 protocol
+=======================================================
+
+Configuration of your climate will depend on capabilities specific model.
+
+Minimal configuration will look like this:
+
+.. example_yaml:: examples/min-smartair2.yaml
+
+Maximum configuration witch will use all possible options will look like this:
+
+.. example_yaml:: examples/max-smartair2.yaml

docs/hon_example.rst

@@ -1,12 +1,26 @@
+.. This file is automatically generated by ./docs/script/make_doc.py Python script.
+   Please, don't change. In case you need to make corrections or changes change
+   source documentation in ./doc folder or script.
+
 Example of climate configuration for hOn protocol
 =================================================
 
 Configuration of your climate will depend on capabilities specific model.
 
 Minimal configuration will look like this:
 
-.. literalinclude:: examples/min-hon.yaml
-  :language: yaml
+.. code-block:: yaml
+
+    uart:
+      baud_rate: 9600
+      tx_pin: 17
+      rx_pin: 16
+    
+    climate:
+      - platform: haier
+        protocol: hOn
+        name: Haier hOn Climate
+
 
 Maximum configuration witch will use all possible options will look like this:
 
@@ -290,3 +304,6 @@ Maximum configuration witch will use all possible options will look like this:
           name: Haier hOn Climate Indoor Fan Status
         outdoor_fan_status:
           name: Haier hOn Climate Outdoor Fan Status
+
+
+

docs/script/process_examples.py

@@ -0,0 +1,31 @@
+import sys
+import re
+
+document_header = [
+    ".. This file is automatically generated by ./docs/script/make_doc.py Python script.\n",
+    "   Please, don't change. In case you need to make corrections or changes change\n",
+    "   source documentation in ./doc folder or script.\n\n"
+]
+
+if len(sys.argv) < 3:
+    print("Usage: python process_examples.py <input_file> <output_file>")
+    sys.exit(1)
+
+input_file = sys.argv[1]
+output_file = sys.argv[2]
+
+with open(input_file, "r") as f:
+    ofile = open(output_file, "w")
+    lines = f.readlines()
+    ofile.writelines(document_header)
+    for line in lines:
+      m = re.match(r"^.. example_yaml:: ([^\n]+)", line)
+      if m:
+        print("Processing example: " + m.group(1))
+        ofile.write(".. code-block:: yaml\n\n")
+        example = open(m.group(1), "r")
+        for l in example.readlines():
+          ofile.write("    " + l)
+        ofile.write("\n")
+      else:
+        ofile.write(line)

docs/smartair2_example.rst

@@ -1,3 +1,7 @@
+.. This file is automatically generated by ./docs/script/make_doc.py Python script.
+   Please, don't change. In case you need to make corrections or changes change
+   source documentation in ./doc folder or script.
+
 Example of climate configuration for smartair2 protocol
 =======================================================
 
@@ -11,22 +15,22 @@ Minimal configuration will look like this:
       baud_rate: 9600
       tx_pin: 17
       rx_pin: 16
-
+    
     climate:
       - platform: haier
-        name: Haier SmartAir2 Climate
+        name: Haier hOn Climate
 
 
 Maximum configuration witch will use all possible options will look like this:
 
 .. code-block:: yaml
 
-    uart:
+    uart:
       baud_rate: 9600
       tx_pin: 17
       rx_pin: 16
       id: haier_uart
-
+    
     api:
       services:
         - service: turn_on
@@ -35,7 +39,7 @@ Maximum configuration witch will use all possible options will look like this:
         - service: turn_off
           then:
           - climate.haier.power_off: haier_ac
-
+    
     climate:
       - platform: haier
         id: haier_ac
@@ -64,7 +68,7 @@ Maximum configuration witch will use all possible options will look like this:
           - BOOST
           - COMFORT
           - AWAY
-
+    
     switch:
       - platform: template
         id: haier_ac_health_mode
@@ -89,3 +93,6 @@ Maximum configuration witch will use all possible options will look like this:
           climate.haier.display_on: haier_ac
         turn_off_action:
           climate.haier.display_off: haier_ac
+
+
+