Skip to content
This repository has been archived by the owner on Sep 15, 2022. It is now read-only.

A Open Lighting show controller that can run standalone on a Raspberry Pi written in Python.

License

Notifications You must be signed in to change notification settings

peterdikant/rpi-ola-controller

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

12 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

rpi-ola-controller

An Open Lighting show controller that can run standalone on a Raspberry Pi written in Python.

Dynamic lighting scenes are created in a yaml configuration file. Each scene can consist of multiple steps where each step has a fade and hold time. Steps can be played in random or linear order.

Each scene can be attached to a certain key on the keyboard. Key presses are monitored on usb level using the evdev library so that it is possible to run the controller from /etc/rc.local without being logged in.

Install

Make sure that you have OLA set up and running. Create an OLA universe and make sure that your light fixtures work.

The best option to install OLA on a Raspberry is to use the custom OLA Raspbian image from http://www.opendmx.net/index.php/OLA_Raspberry_Pi

Depending on your DMX interface it might be necessary to update your Linux kernel. The easiest way to do this is to use the following script: https://github.com/Hexxeh/rpi-update

Use pip to install the required python libraries:

sudo pip install PyYAML evdev

Now you can run the controller with the sample configuration file:

sudo ./rpi-ola-controller.py -c conf/simpleconfig.yaml

The evdev library captures the keyboard input on device level and needs root privileges. The above command will search for all available input devices and list them:

Error: You need to specify one of the following input devices:
  /dev/input/event3    ImExPS/2 Generic Explorer Mouse 
  /dev/input/event2    AT Translated Set 2 keyboard    
  /dev/input/event1    Sleep Button                    
  /dev/input/event0    Power Button

Select your keyboard and add the device to the command line:

sudo ./rpi-ola-controller.py -c conf/simpleconfig.yaml -i /dev/input/event2

The controller will play the first scene. You should see the DMX values change in ola_dmxmonitor. Try changing scenes with the number keys. If you press a key that is not mapped to a scene, the key code will be displayed, so that you can configure this key in the yaml file.

Press 'q' to quit.

Configuration

Use the default configuration file as a starting point. First you need to define some settings that apply to all scenes:

  • universe should match a universe id you have created in OLA.

  • frame_duration is the length of a single DMX frame in milliseconds. A value of 40 means that the controller will send 25 frames per second to your lighting rig. Cheap DMX interfaces are often not able to send more the 40 frames per second. You should try different settings to find the optimal frame rate for your setup.

  • start_scene defines the scene that will be played when the light controller starts. Use a scene with some lights on to see that your Raspberry has finished booting. The first defined scene has the index 1.

Each scene can consist of multiple steps that can be played in linear or random order. Common to all steps are the following settings:

  • trigger_keys is a list of all key codes that will trigger this scene. The easiest way to find key codes is to start the controller and press the keys you want to use. If these keys are not already mapped to a scene, the controller will display the key code. You can then enter this code into the configuration file.

  • repeat defines if the steps of this scene should be repeated. If this is set to no then the last step will hold until you trigger a new scene.

  • order can be linear or random and defines the order in which the steps will be played

Each step has the following settings:

  • fade is the time in milliseconds to fade into this scene. If this time is set to 0 then the lights will switch to the new values, else the DMX values will interpolate to the new settings.

  • hold will hold the current scene values for the specified time in milliseconds. The hold time starts after the fade time. So if you have a fade time of 500 and a hold time of 1500, the current step will take 2 seconds.

  • values this represents the DMX values in the current step. The first value is the one at DMX address 1. You need to define the DMX values for all your lighting fixtures in this list.

Performance

The Raspberry Pi does not have a very fast CPU. Keep this in mind when using this script. If you experience short blackouts, try to lower the frame rate. The more fixtures you have the more computing time is needed. With 40 fps the Raspberry Pi can handle around 100 dmx addresses. With 25 fps you can use around 200 addresses.

About

A Open Lighting show controller that can run standalone on a Raspberry Pi written in Python.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages