Add an example that uses burst APIs

uses i2c_write_burst_blocking and i2c_read_burst_blocking

README.md

@@ -133,6 +133,7 @@ App|Description
 [pcf8523_i2c](i2c/pcf8523_i2c) | Read time and date values from a real time clock. Set current time and alarms on it.
 [ht16k33_i2c](i2c/ht16k33_i2c) | Drive a 4 digit 14 segment LED with an HT16K33.
 [slave_mem_i2c](i2c/slave_mem_i2c) | i2c slave example where the slave implements a 256 byte memory
+[slave_mem_i2c_burst](i2c/slave_mem_i2c) | i2c slave example where the slave implements a 256 byte memory. This version inefficiently writes each byte in a separate call to demonstrate read and write burst mode.
 
 ### Interpolator
 

i2c/slave_mem_i2c/CMakeLists.txt

@@ -8,3 +8,14 @@ target_link_libraries(slave_mem_i2c
     )
 pico_add_extra_outputs(slave_mem_i2c)
 example_auto_set_url(slave_mem_i2c)
+
+add_executable(slave_mem_i2c_burst
+    slave_mem_i2c_burst.c
+    )
+target_link_libraries(slave_mem_i2c_burst
+    pico_i2c_slave
+    hardware_i2c
+    pico_stdlib
+    )
+pico_add_extra_outputs(slave_mem_i2c_burst)
+example_auto_set_url(slave_mem_i2c_burst)

i2c/slave_mem_i2c/slave_mem_i2c_burst.c

@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2021 Valentin Milea <[email protected]>
+ * Copyright (c) 2023 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <hardware/i2c.h>
+#include <pico/i2c_slave.h>
+#include <pico/stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+static const uint I2C_SLAVE_ADDRESS = 0x17;
+static const uint I2C_BAUDRATE = 100000; // 100 kHz
+
+#ifdef i2c_default
+// For this example, we run both the master and slave from the same board.
+// You'll need to wire pin GP4 to GP6 (SDA), and pin GP5 to GP7 (SCL).
+static const uint I2C_SLAVE_SDA_PIN = PICO_DEFAULT_I2C_SDA_PIN; // 4
+static const uint I2C_SLAVE_SCL_PIN = PICO_DEFAULT_I2C_SCL_PIN; // 5
+static const uint I2C_MASTER_SDA_PIN = 6;
+static const uint I2C_MASTER_SCL_PIN = 7;
+
+// The slave implements a 256 byte memory. To write a series of bytes, the master first
+// writes the memory address, followed by the data. The address is automatically incremented
+// for each byte transferred, looping back to 0 upon reaching the end. Reading is done
+// sequentially from the current memory address.
+static struct
+{
+    uint8_t mem[256];
+    uint8_t mem_address;
+    bool mem_address_written;
+} context;
+
+// Our handler is called from the I2C ISR, so it must complete quickly. Blocking calls /
+// printing to stdio may interfere with interrupt handling.
+static void i2c_slave_handler(i2c_inst_t *i2c, i2c_slave_event_t event) {
+    switch (event) {
+    case I2C_SLAVE_RECEIVE: // master has written some data
+        if (!context.mem_address_written) {
+            // writes always start with the memory address
+            uint8_t by = i2c_read_byte_raw(i2c);
+            context.mem_address = by;
+            context.mem_address_written = true;
+        } else {
+            // save into memory
+            uint8_t by = i2c_read_byte_raw(i2c);
+            context.mem[context.mem_address] = by;
+            context.mem_address++;
+        }
+        break;
+    case I2C_SLAVE_REQUEST: // master is requesting data
+        // load from memory
+        i2c_write_byte_raw(i2c, context.mem[context.mem_address]);
+        context.mem_address++;
+        break;
+    case I2C_SLAVE_FINISH: // master has signalled Stop / Restart
+        context.mem_address_written = false;
+        break;
+    default:
+        break;
+    }
+}
+
+static void setup_slave() {
+    gpio_init(I2C_SLAVE_SDA_PIN);
+    gpio_set_function(I2C_SLAVE_SDA_PIN, GPIO_FUNC_I2C);
+    gpio_pull_up(I2C_SLAVE_SDA_PIN);
+
+    gpio_init(I2C_SLAVE_SCL_PIN);
+    gpio_set_function(I2C_SLAVE_SCL_PIN, GPIO_FUNC_I2C);
+    gpio_pull_up(I2C_SLAVE_SCL_PIN);
+
+    i2c_init(i2c0, I2C_BAUDRATE);
+    // configure I2C0 for slave mode
+    i2c_slave_init(i2c0, I2C_SLAVE_ADDRESS, &i2c_slave_handler);
+}
+
+static void run_master() {
+    gpio_init(I2C_MASTER_SDA_PIN);
+    gpio_set_function(I2C_MASTER_SDA_PIN, GPIO_FUNC_I2C);
+    // pull-ups are already active on slave side, this is just a fail-safe in case the wiring is faulty
+    gpio_pull_up(I2C_MASTER_SDA_PIN);
+
+    gpio_init(I2C_MASTER_SCL_PIN);
+    gpio_set_function(I2C_MASTER_SCL_PIN, GPIO_FUNC_I2C);
+    gpio_pull_up(I2C_MASTER_SCL_PIN);
+
+    i2c_init(i2c1, I2C_BAUDRATE);
+
+    for (uint8_t mem_address = 0;; mem_address = (mem_address + 32) % 256) {
+        char msg[32];
+        snprintf(msg, sizeof(msg), "Hello, I2C slave! - 0x%02X", mem_address);
+        uint8_t msg_len = strlen(msg);
+
+        uint8_t buf[32];
+        buf[0] = mem_address;
+        memcpy(buf + 1, msg, msg_len);
+        // write message at mem_address
+        printf("Write at 0x%02X: '%s'\n", mem_address, msg);
+        for(int i = 0; i < (1 + msg_len); i++) {
+            int count;
+            if (i < (1 + msg_len - 1)) {
+                count = i2c_write_burst_blocking(i2c1, I2C_SLAVE_ADDRESS, &buf[i], 1);
+                sleep_ms(1); // gratuitous sleep for demonstration purposes - don't do this in real code!
+            } else if (i == (1 + msg_len - 1)) {
+                count = i2c_write_blocking(i2c1, I2C_SLAVE_ADDRESS, &buf[i], 1, false);
+            }
+            if (count != 1) {
+                puts("Couldn't write to slave, please check your wiring!");
+                return;
+            }
+        }
+
+        // seek to mem_address
+        int count = i2c_write_blocking(i2c1, I2C_SLAVE_ADDRESS, buf, 1, true);
+        hard_assert(count == 1);
+
+        // partial read
+        for(int i = 0; i < msg_len; i++) {
+            if (count < (msg_len - 1)) {
+                count = i2c_read_burst_blocking(i2c1, I2C_SLAVE_ADDRESS, buf + i, 1);
+                sleep_ms(1); // gratuitous sleep for demonstration purposes - don't do this in real code!
+            } else {
+                count = i2c_read_blocking(i2c1, I2C_SLAVE_ADDRESS, buf + i, 1, false);
+            }
+            hard_assert(count == 1);
+        }
+        buf[msg_len] = '\0';
+        printf("Read  at 0x%02X: '%s'\n", mem_address, buf);
+        hard_assert(memcmp(buf, msg, msg_len) == 0);
+
+        puts("");
+        sleep_ms(2000);
+    }
+}
+#endif
+
+int main() {
+    stdio_init_all();
+#if !defined(i2c_default) || !defined(PICO_DEFAULT_I2C_SDA_PIN) || !defined(PICO_DEFAULT_I2C_SCL_PIN)
+#warning i2c / slave_mem_i2c example requires a board with I2C pins
+    puts("Default I2C pins were not defined");
+    return 0;
+#else
+    puts("\nI2C slave example");
+
+    setup_slave();
+    run_master();
+#endif
+}