Skip to content

pief/authsplit

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

44 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

              authsplit DokuWiki Split authentication plugin
       Copyright (c) 2013-2017 Pieter Hollants <[email protected]>
           Licensed under the GNU Public License (GPL) version 3


NOTE: This auth plugin requires DokuWiki WeatherWax (2013-05-10a) or later!


DESCRIPTION

authsplit, while technically being an auth plugin, does NOT do any
authentication itself. Instead, it splits DokuWiki's different authentication
method calls among TWO other auth plugins that will do the actual work:
- a PRIMARY auth plugin that will be used for VALIDATION of login names and
  passwords only. This is where authentication really happens and the
  authentication source behind this plugin is most probably shared with other
  software and services.
- a SECONDARY auth plugin that supplies ADDITIONAL user information such as
  real names, email addresses and groups. This is most probably specific to
  DokuWiki.

This suggests using authsplit to combine a rather primitive, yet for some reason
particularly useful auth plugin with an auth plugin that is more powerful, yet
for some reason not useful enough if used on its own.

The example that comes to mind is to use authhttp as PRIMARY auth plugin and
authplain as SECONDARY auth plugin, thereby combining the advantages of reusing
HTTP authentication information with an auth plugin that supplements everything
HTTP authentication can't offer, such as email addresses. This is the scenario
authsplit has been tested with, but in theory it should work with other auth
plugin combinations as well. Feel free to give me feedback on other working
combinations.

As authsplit has to orchestrate two auth plugins and the user's state in
them, it is possible that a user is known to one of the two plugins only or
stored with different data. This may lead to the effect that while one auth
plugin knows about him or her, (s)he is still being reported to DokuWiki as
being unknown. Since these effects may not be particularly intuitive at first
sight, you should read the following explanations carefully. It is ESSENTIAL to
really understand how authsplit works in order to prevent accidental lockout
or security breaches due to improper configuration and/or unexpected behavior!


HOW IT WORKS

In order to understand how authsplit works one doesn't really get around
learning about DokuWiki's authentication system. Please refer to
https://www.dokuwiki.org/devel:auth_plugins for fundamental basics.

authsplit maps DokuWiki's authentication method calls as follows:

- checkPass(): this is DokuWiki's method that validates login names and
  passwords. authsplit will first make sure that the PRIMARY auth plugin
  validates both login name and password successfully. If a user is not known
  here, he is not known to DokuWiki at all.

  If known and the password matches, authsplit then calls the internal helper
  method _checkUserOnSecondaryAuthPlugin() (see below).

- trustExternal(): this is the method DokuWiki calls if the PRIMARY auth
  plugin uses external authentication. authsplit will let the auth plugin itself
  do whatever authentication is required, eg. against a third-party cookie.

  As with checkPass(), _checkUserOnSecondaryAuthPlugin() is then called. Due to
  the semantics of external authentication, however, the method ends by doing an
  additional call to getUserData() to update the global $USERINFO array with the
  information from the SECONDARY auth plugin.

- _checkUserOnSecondaryAuthPlugin(): This is an internal helper method that
  tries to obtain the additional user information (real name, email address,
  groups) from the SECONDARY auth plugin, which means that the user will have to
  be known there by the same login name, too. If not, behaviour depends on the
  autocreate_users configuration setting:
  - if enabled (and the SECONDARY auth plugin reports being capable of adding
    users), authsplit will create a user account there, too, using user
    information from the PRIMARY auth plugin as basis. As this information will
    most likely not be very useful, the user will not only be notified that an
    account has been automatically created for him or her, but that (s)he should
    also review his or her user profile.
  - otherwise the user seems to DokuWiki to be not logged in and will thus most
    likely see an "Access denied" page. He or she will either have to register
    him- or herself or, if self-registration has been disabled, the Admin will
    have to create an account for him or her.

- logOff(): DokuWiki documentation says this method is run "in addition to the
  usual logOff. Useful with trustExternal() to initiate actions for the
  external backend, eg. use it to clear cookies or similar actions".

  authsplit just delegates the call to the PRIMARY auth plugin's logOff()
  method.

- getUserData(): this is the method DokuWiki uses eg. to retrieve the user's
  real name for display in the "Logged in as" section in the upper right (if
  you use the default "DokuWiki" template). authsplit will call the PRIMARY
  auth plugin's getUserData() method only to make sure the user exists there and
  then return the SECONDARY auth plugin's getUserData() information to DokuWiki.
  Thus, a user has to be known to both auth plugins, but the SECONDARY's user
  information matters. Any group membership information returned from the PRIMARY
  auth plugin will be silently ignored.

- createUser(): this is the method that gets called if users register themselves
  or the Admin uses DokuWiki's user manager to create an account for them.

  authsplit will first check if the user is not known to the PRIMARY auth plugin
  yet and whether it is capable of adding users. If so, it will try to create
  the user there, first. This is so that you can use DokuWiki to quickly create
  a user both in DokuWiki AND your common authentication source without having
  to fire up whatever admin tool the PRIMARY auth plugin would otherwise
  require.

  If successful (or the PRIMARY auth plugin does not support adding users, as is
  the case for authhttp), the user is then created in the SECONDARY auth plugin
  but with an EMPTY password. This is by intent since passwords are supposed to
  come from the PRIMARY auth plugin.

  This also means that an Admin can not specify a password in the user manager
  unless the PRIMARY auth plugin reports being capable of modifying passwords,
  too. If not (and this is the case eg. for authhttp), this also means that in
  the user self-registration form, users should not be able to specify a
  password and DokuWiki should not try to generate one for them because it
  wouldn't be stored anywhere and the user would thus get irritated. authhttp
  eg. comes with an action plugin that takes care of this.

- modifyUser(): where authsplit routes a change depends on the actual change
  itself:
  - for login names, real names and email addresses, authsplit will try to
    modify in the PRIMARY auth plugin first (if that plugin reports being
    capable of modifying it, that is), then in the SECONDARY auth plugin.
  - passwords will be modified in the PRIMARY auth plugin only since by design
    the SECONDARY auth plugin knows empty ones only.
  - group memberships will always be modified in the SECONDARY auth plugin only.

- deleteUser(): authsplit will ALWAYS route delete user requests to the
  SECONDARY auth plugin only. This is because it can't know whether user
  accounts known to the PRIMARY auth plugin are yet in use by other software.
  Thus, deleting a user with the user manager will remove knowledge of his or
  her existance in DokuWiki only.

- retrieveUsers() / getUserCount(): authsplit will always route these method
  calls to the SECONDARY auth plugin, following the concept that DokuWiki's
  user manager is supposed to manage DokuWiki users in the first place. Thus,
  even if the PRIMARY auth plugin offered these methods, the user lists and
  counts obtained there would not be of much use since, unless autocreate_users
  is enabled, only the SECONDARY auth plugin would really know which users resp.
  how many users really had DokuWiki access.

- addGroup() / retrieveGroups(): authsplit will always route these method calls
  to the SECONDARY auth plugin since, by design, that is where group membership
  information comes from.

- isCaseSensitive() / cleanUser(): authsplit will always route these method
  calls to the PRIMARY auth plugin since that is the one that dictates
  restrictions on login names.

- cleanGroup(): authsplit will always route this method call to the SECONDARY
  auth plugin since that is the one that dictates restrictions on group names.

So to summarize which auth plugins are involved in which method calls:

                     PRIMARY AUTH PLUGIN      SECONDARY AUTH PLUGIN
--------------------------------------------------------------------------------
checkPass()          Authenticated here       User existance required*
trustExternal()      Authenticated here       User existance required*
logOff()             Done here                -
getUserData()        User existance required  Stored here
createUser()         Created here**´          Created here
modifyUser()         Depends on the information being modified:
  Login names        Modified here**          Modified here
  Real names         Modified here**          Modified here
  eMail addresses    Modified here**          Modified here
  Passwords          Modified here            -
  Group memberships  -                        Modified here
deleteUser()         -                        Deleted here
retrieveUsers()      -                        Retrieved here
getUserCount()       -                        Counted here
addGroup()           -                        Created here
retrieveGroups()     -                        Retrieved here
isCaseSensitive()    Determined here          -
cleanUser()          Determined here          -
cleanGroup()         -                        Determined here

Legend:
* : Can be created if autocreate_users == 1
**: If supported by the auth plugin

This theory tells you, for example, that if you combine authplain as PRIMARY
auth plugin with authmysql as SECONDARY auth plugin:
- login names and passwords would come from authplain, ie. stored in the
  conf/users.auth.php file.
- additional user information would come from authmysql.
- users would be created in both authplain and authmysql, modified in one or
  both (depending on the information being modified) but deleted in authmysql
  only
- groups would be created in authmysql.

Of course, this example is not a particular useful combination. After all, why
would you want to store users in a DokuWiki-specific textfile and put additional
information in a MySQL database...

As mentioned above, using authhttp as the PRIMARY auth plugin and authplain
as the SECONDARY auth plugin is the prime use case. You could of course also
try to combine authhttp with authmysql, or authldap with authplain etc. In
effect, just try things out and give me feedback on working combinations and
their particular use cases.


INSTALLATION

Download the latest version from https://github.com/pief/authsplit/zipball/master
and rename the extracted directory to "authsplit", otherwise the plugin won't
work.

Please refer to http://www.dokuwiki.org/plugins for additional info
on how to install plugins in DokuWiki.


CONFIGURATION AND SETTINGS

authsplit itself uses the following configuration settings:
- primary_authplugin: This is the DokuWiki auth plugin that will be used to
  validate login names and passwords. An example candidate is my authhttp
  plugin.
- secondary_authplugin: This is the DokuWiki auth plugin that will be used to
  store additional user information such as real names, email addresses and
  groups.
- username_caseconversion: If one of the two auth plugins used is
  case-sensitive, it may be necessary to enable this setting to let authsplit
  convert the username to either uppercase or lowercase (eg. when combining
  authldap which is case-insensitive with authsplit which is not).
- autocreate_users: If enabled, authsplit will automatically create user
  accounts for any users that exist in the PRIMARY auth plugin, but are yet
  unknown in the SECONDARY auth plugin. If disabled, users will either have to
  register themselves or created by the admin (eg. if registration has been
  disabled).
- debug: If enabled, authsplit will flood the screen with debugging messages
  meant to aid in troubleshooting its operation. This setting should not be
  enabled in productive setups.

Note that you'll have to take some of the used auth plugin's settings into
consideration whereas some may not apply any longer due to the way authsplit
works. For example, when using authhttp as the PRIMARY auth plugin, authhttp's
configuration settings no longer have any effect since all email addresses and
group information come from the SECONDARY auth plugin instead.


REFERENCES

Visit the DokuWiki plugin page at

  https://www.dokuwiki.org/plugin:authsplit

To follow development more closely, clone the GitHub repo at

  https://github.com/pief/authsplit.git


CREDITS

This plugin is based on ideas in the "ggauth" auth backend by Grant Gardner
<[email protected]>, https://www.dokuwiki.org/auth:ggauth. Grant does
not actively maintain ggauth anymore, so an update for the new auth plugins
concept is unlikely.

Support for external authentication was contributed by David Darras
<[email protected]>.

About

Split Dokuwiki authentication among auth plugins

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •  

Languages