fix stuff again

Build-Instructions/Build-Manual-Ring-3.md

@@ -7,7 +7,7 @@ the slighest flaw will make it works badly.
 
 ![](./Assets/Inner-ring.png)
 
-## Glue the cradle
+## Glue the bridge
 
 - You will need gorilla glue, clamp and 10 mm M3 screw. M3 screw are only used for alignment, glue is what matter to hold parts together.
 

Build-Instructions/Build-Manual-RingMotor-2.md

@@ -32,7 +32,7 @@ Glue "Back-plunger-Higher-spring_4mm-x1.stl" to "Back-plunger-arm_4mm-x1.stl" us
 
 ![](./Assets/Back-plunger-arm-highspring-part.png)
 
-Install a 4 mm by 30 mm spring, I used one coming from a pen. If it's too long you can cut it.
+Install a 4 mm by 30 mm spring, we used one coming from a pen. If it's too long you can cut it.
 
 ## Install the arm
 

Build-Instructions/Build-Manual-Software-1.md

@@ -10,7 +10,7 @@
 
 ## About-OTA
 
-Give system informations and allow to upload over-the-air (OTA) update
+Give system informations and it allows to upload over-the-air (OTA) update
 
 ## Settings
 
@@ -23,7 +23,7 @@ DF Robot Mini Pro (DF1201S). It has it's own USB drive so you can plug it to a c
 
 ![](./Assets/DF1201S.png)
 
-The only way I found to play a specific file (the provided command for playing by name doesn't work) is
+The only way we have found to play a specific file (the provided command for playing by name doesn't work) is
 to use the file number. It is defined by copy order on the USB drive.
 
 To add sound FX to the mp3 player:
@@ -34,7 +34,7 @@ To add sound FX to the mp3 player:
 ![](./Assets/edit-copy-mp3.png)
 
 - Execute it.
-- Ensure all file were copied on the USB drive. If you screw the order you can format it and do the procedure again.
+- Ensure all files were copied on the USB drive. If you screw the order you can format it and do the procedure again.
 
 ![](./Assets/file-explorer-mp3.png)
 

Build-Instructions/Build-Manual-Wormhole-1.md

@@ -2,7 +2,7 @@
 
 ## Cut the plexiglass
 
-You need a 2 mm sheet of plexiglass. Be carefull with compass, it could leave horrible trace.
+You need a 2 mm sheet of plexiglass. Be carefull with compass, it could leave horrible traces.
 
 You need to cut circle of 161.5 mm into a plexiglass sheet.
 You will need to cut the lower part at the right height using a dremel or use "Plexgliass-Template-Dummy.stl" as template for laser cut.
@@ -14,7 +14,7 @@ You will need to cut the lower part at the right height using a dremel or use "P
 Remove the plastic protection on the mirror film, it could be a nightmare to find but it's there.
 You cannot apply it directly to the plexiglass, it won't work it will just create something horrible full of bubble and ruin your nice work.
 You can check on youtube there are several tutorial about how to apply it but basically you need:
-- Cut the film, it should be 1 inch bigger on every side. Ensure you get a nice spot, sometime the film could be slighly damaged. Inspect just to be sure. 
+- Cut the film, it should be 1 inch bigger on every side. Ensure you get a nice spot, sometime the film could be slighly damaged. Inspect just to be sure.
 - Apply water mixed with soap using a spray bottle over the plexiglass
 - Remove the protection film from the mirror film
 - Stick the mirror film over the plexiglass, use a ruler to push water bubble ouside
@@ -57,7 +57,7 @@ Example of ruined filter:
 ## Glue "Wormhole-outer-rim.stl"
 
 Glue it using gorilla glue on the outside part of the "Wormhole-outer-rim.stl".
-Use clamp to be sure it hold in place until glue is completely cured. 
+Use clamp to be sure it hold in place until glue is completely cured.
 
 ![](./Assets/install-wormhole-outer-rim.png)