Skip to content

This soft robot intergrates flexible silicon parts that can be easily design and built at a very low cost.

Notifications You must be signed in to change notification settings

poppy-project/poppy-soft-starfish

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

29 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Poppy Soft Starfish

This soft robot intergrates flexible silicon parts that can be easily design and built at a very low cost (>1$). It make use of the poppy-soft-connector.

forward_side_view

Discussions about this project are located at this post. The project has been highlighted on Hackaday

Principles

By embedding hard connectors into silicon based parts, we create soft parts with a standard mechanical interface. These parts can be used as plug and play building blocks in our robots. See our tutorial video.

To create the soft part you have to prepare a mold of the desired shape. The mold's wall should be 2.2mm thick (for Ollo rivets) and include Ollo holes at the position you would like to add the connectors. The connectors are then positioned into the mold and maintained in place using Ollo rivet. You can then pour the polymer of your choice into the mold and allow for enough time for the polymer to cure - thus embedding the connector into the part. The soft part can then be unmolded and attached with XL-320 motors or any Ollo parts to create 'soft robots'. The starfish robot demonstrates how to use soft connectors.

The possibilities are immense as many different kinds of polymer can be used with many different properties. It also allows to embed electronics, sensors, cables, and more into the body of our robots. We hope this will tickle the imagination and open new possibilities for artistic minded people!

More information

Contributing

Create your own soft robot and share it on our forum!

You can also propose new optimized design for the poppy-soft-connector.

To contribute to this repository, you can fork it and issue a pull request. [Another useful link]

License

All the technological development work made in the Poppy project is freely available under open source licenses. Only the name usage "Poppy" is restricted and protected as an international trademark, please contact us if you want to use it or have more information.

License Hardware Software
Title Creatives Commons BY-SA GPL v3
Logo Creative Commons BY-SA GPL V3

About

This soft robot intergrates flexible silicon parts that can be easily design and built at a very low cost.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages