Skip to content

ppc64le-cloud/bootc-image-builder

Β 
Β 

Repository files navigation

bootc-image-builder

A container to create disk images from bootc container inputs, especially oriented towards Fedora/CentOS bootc or derivatives.

πŸ”¨ Installation

Have podman installed on your system. Either through your systems package manager if you're on Linux or through Podman Desktop if you are on macOS or Windows. If you want to run the resulting virtual machine(s) or installer media you can use qemu.

A very nice GUI extension for Podman Desktop is also available. The command line examples below can be all handled by Podman Desktop.

On macOS, the podman machine must be running in rootful mode:

$ podman machine stop   # if already running
Waiting for VM to exit...
Machine "podman-machine-default" stopped successfully
$ podman machine set --rootful
$ podman machine start

πŸš€ Examples

The following example builds a centos-bootc:stream9 bootable container into a QCOW2 image for the architecture you're running the command on. However, be sure to see the upstream documentation for more general information! Note that outside of initial experimentation, it's recommended to build a derived container image (or reuse a derived image built via someone else) and then use this project to make a disk image from your custom image.

The generic base images do not include a default user. This example injects a user configuration file by adding a volume-mount for the local file to the bootc-image-builder container.

The following command will create a QCOW2 disk image. First, create ./config.toml as described above to configure user access.

# Ensure the image is fetched
sudo podman pull quay.io/centos-bootc/centos-bootc:stream9
sudo podman run \
    --rm \
    -it \
    --privileged \
    --pull=newer \
    --security-opt label=type:unconfined_t \
    -v $(pwd)/config.toml:/config.toml \
    -v $(pwd)/output:/output \
    -v /var/lib/containers/storage:/var/lib/containers/storage \
    quay.io/centos-bootc/bootc-image-builder:latest \
    --type qcow2 \
    --local \
    quay.io/centos-bootc/centos-bootc:stream9

Running the resulting QCOW2 file on Linux (x86_64)

A virtual machine can be launched using qemu-system-x86_64 or with virt-install as shown below; however there is more information about virtualization and other choices in the Fedora/CentOS bootc documentation.

qemu-system-x86_64

qemu-system-x86_64 \
    -M accel=kvm \
    -cpu host \
    -smp 2 \
    -m 4096 \
    -bios /usr/share/OVMF/OVMF_CODE.fd \
    -serial stdio \
    -snapshot output/qcow2/disk.qcow2

virt-install

sudo virt-install \
    --name fedora-bootc \
    --cpu host \
    --vcpus 4 \
    --memory 4096 \
    --import --disk ./output/qcow2/disk.qcow2,format=qcow2 \
    --os-variant fedora-eln

Running the resulting QCOW2 file on macOS (aarch64)

This assumes qemu was installed through homebrew.

qemu-system-aarch64 \
    -M accel=hvf \
    -cpu host \
    -smp 2 \
    -m 4096 \
    -bios /opt/homebrew/Cellar/qemu/8.1.3_2/share/qemu/edk2-aarch64-code.fd \
    -serial stdio \
    -machine virt \
    -snapshot output/qcow2/disk.qcow2

πŸ“ Arguments

Usage:
  sudo podman run \
    --rm \
    -it \
    --privileged \
    --pull=newer \
    --security-opt label=type:unconfined_t \
    -v $(pwd)/output:/output \
    quay.io/centos-bootc/bootc-image-builder:latest \
    <imgref>

Flags:
      --chown string           chown the ouput directory to match the specified UID:GID
      --tls-verify             require HTTPS and verify certificates when contacting registries (default true)
      --type string            image type to build [qcow2, ami] (default "qcow2")
      --target-arch string     architecture to build image for (default is the native architecture)

Detailed description of optional flags

Argument Description Default Value
--chown chown the output directory to match the specified UID:GID ❌
--rootfs Root filesystem type. Overrides the default from the source container. Supported values: ext4, xfs
--tls-verify Require HTTPS and verify certificates when contacting registries true
--type Image type to build qcow2
--target-arch Target arch to build ❌

The --type parameter can be given multiple times and multiple outputs will be produced.

πŸ’‘ Tip: Flags in bold are the most important ones.

πŸ’Ύ Image types

The following image types are currently available via the --type argument:

Image type Target environment
ami Amazon Machine Image
qcow2 (default) QEMU
vmdk VMDK usable in vSphere, among others
anaconda-iso An unattended Anaconda installer that installs to the first disk found.
raw Unformatted raw disk.

πŸ’Ύ Target architecture

Specify the target architecture of the system on which the disk image will be installed on. By default, bootc-image-builder will build for the native host architecture. The target architecture must match an available architecture of the bootc-image-builder image you are using to build the disk image. Currently, amd64 and arm64 are included in quay.io/centos-bootc/bootc-image-builder manifest list. The architecture of the bootc OCI image and the bootc-image-builder image must match. For example, when building a non-native architecture bootc OCI image, say, building for x86_64 from an arm-based Mac, it is possible to run podman build with the --platform linux/amd64 flag. In this case, to then build a disk image from the same arm-based Mac, you should provide --target-arch amd64 when running the bootc-image-builder command.

☁️ Cloud uploaders

Amazon Machine Images (AMIs)

Prerequisites

In order to successfully import an AMI into your AWS account, you need to have the vmimport service role configured on your account.

Flags

AMIs can be automatically uploaded to AWS by specifying the following flags:

Argument Description
--aws-ami-name Name for the AMI in AWS
--aws-bucket Target S3 bucket name for intermediate storage when creating AMI
--aws-region Target region for AWS uploads

Notes:

  • These flags must all be specified together. If none are specified, the AMI is exported to the output directory.
  • The bucket must already exist in the selected region, bootc-image-builder will not create it if it is missing.
  • The output volume is not needed in this case. The image is uploaded to AWS and not exported.

AWS credentials file

If you already have a credentials file (usually in $HOME/.aws/credentials) you need to forward the directory to the container

For example:

 $ sudo podman run \
  --rm \
  -it \
  --privileged \
  --pull=newer \
  --security-opt label=type:unconfined_t \
  -v $HOME/.aws:/root/.aws:ro \
  --env AWS_PROFILE=default \
  quay.io/centos-bootc/bootc-image-builder:latest \
  --type ami \
  --aws-ami-name centos-bootc-ami \
  --aws-bucket fedora-bootc-bucket \
  --aws-region us-east-1 \
  quay.io/centos-bootc/centos-bootc:stream9

Notes:

  • you can also inject ALL your AWS configuration parameters with --env AWS_*

see the AWS CLI documentation for more information about other environment variables

AWS credentials via environment

AWS credentials can be specified through two environment variables:

Variable name Description
AWS_ACCESS_KEY_ID AWS access key associated with an IAM account.
AWS_SECRET_ACCESS_KEY Specifies the secret key associated with the access key. This is essentially the "password" for the access key.

Those should not be specified with --env as plain value, but you can silently hand them over with --env AWS_* or save these variables in a file and pass them using the --env-file flag for podman run.

For example:

$ cat aws.secrets
AWS_ACCESS_KEY_ID=AKIAIOSFODNN7EXAMPLE
AWS_SECRET_ACCESS_KEY=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY

$ sudo podman run \
  --rm \
  -it \
  --privileged \
  --pull=newer \
  --security-opt label=type:unconfined_t \
  --env-file=aws.secrets \
  quay.io/centos-bootc/bootc-image-builder:latest \
  --type ami \
  --aws-ami-name centos-bootc-ami \
  --aws-bucket centos-bootc-bucket \
  --aws-region us-east-1 \
  quay.io/centos-bootc/centos-bootc:stream9

πŸ’½ Volumes

The following volumes can be mounted inside the container:

Volume Purpose Required
/output Used for storing the resulting artifacts βœ…
/store Used for the osbuild store No
/rpmmd Used for the DNF cache No

πŸ“ Build config

A build config is a Toml (or JSON) file with customizations for the resulting image. The config file is mapped into the container directory to /config.toml. The customizations are specified under a customizations object.

As an example, let's show how you can add a user to the image:

Firstly create a file ./config.toml and put the following content into it:

[[customizations.user]]
name = "alice"
password = "bob"
key = "ssh-rsa AAA ... [email protected]"
groups = ["wheel"]

Then, run bootc-image-builder with the following arguments:

sudo podman run \
    --rm \
    -it \
    --privileged \
    --pull=newer \
    --security-opt label=type:unconfined_t \
    -v $(pwd)/config.toml:/config.toml \
    -v $(pwd)/output:/output \
    quay.io/centos-bootc/bootc-image-builder:latest \
    --type qcow2 \
    quay.io/centos-bootc/centos-bootc:stream9

Users (user, array)

Possible fields:

Field Use Required
name Name of the user βœ…
password Unencrypted password No
key Public SSH key contents No
groups An array of secondary to put the user into No

Example:

{
  "user": [
    {
      "name": "alice",
      "password": "bob",
      "key": "ssh-rsa AAA ... [email protected]",
      "groups": [
        "wheel",
        "admins"
      ]
    }
  ]
}

Kernel Arguments (kernel, mapping)

{
  "customizations": {
    "kernel": {
      "append": "mitigations=auto,nosmt"
    }
  }
}

Building

To build the container locally you can run

sudo podman build --tag bootc-image-builder .

NOTE: running already the podman build as root avoids problems later as we need to run the building of the image as root anyway

Accessing the system

With a virtual machine launched with the above virt-install example, access the system with

ssh -i /path/to/private/ssh-key alice@ip-address

Note that if you do not provide a password for the provided user, sudo will not work unless passwordless sudo is configured. The base image quay.io/centos-bootc/centos-bootc:stream9 does not configure passwordless sudo. This can be configured in a derived bootc container by including the following in a Containerfile.

FROM quay.io/centos-bootc/centos-bootc:stream9
ADD wheel-passwordless-sudo /etc/sudoers.d/wheel-passwordless-sudo

The contents of the file $(pwd)/wheel-passwordless-sudo should be

%wheel ALL=(ALL) NOPASSWD: ALL

πŸ“Š Project

Contributing

Please refer to the developer guide to learn about our workflow, code style and more.

πŸ—„οΈ Repository

🧾 License

  • Apache-2.0
  • See LICENSE file for details.

About

A container for deploying bootable container images.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Go 60.5%
  • Python 35.7%
  • Dockerfile 1.5%
  • Shell 1.2%
  • Other 1.1%