RAK5205-WisTrio-LoRa :GPS ,BME680,LIS3DH,LoRaWAN1.0.2,ARM Cortex-M3 STM32L1
RAK5205-WisTrio-LoRa firmware version 2.x.0.10
Modify default rx1 channel for CN470
RAK5205-WisTrio-LoRa firmware version 2.x.1.9
Configure the default channel for the CN470 mask for fast connections to the TTN and LoRaserver
RAK5205-WisTrio-LoRa firmware version 2.x.1.8
1.Modify the format of the sent data to LPP for cayenne.
2.Fit TTN and LoRaServer at region CN470 to connected quickly.
RAK5205-WisTrio-LoRa firmware version 2.x.0.7
Optimize the initialization data storage, and save parameters to flash once the configuration is finished to save the initialization time.
RAK5205-WisTrio-LoRa firmware version 2.x.0.6
Modify the acceleration sensor LIS3DH send to server data package error.
RAK5205-WisTrio-LoRa firmware version 2.x.0.5
For compatible with older instructions,modify some AT commands to old commands during the configuration.
details of the AT commands refer to 5205-WisTrio-LoRa node V1.1.
RAK5205-WisTrio-LoRa firmware version 2.x.0.4
1.fix a Sending data fault.
2.For a better user experience, The default dutyCycle modify to 100%.
3.Add watchdog.
RAK5205-WisTrio-LoRa firmware version 2.x.0.3
1.fix the "LIS3DH no ack" problem.
2.fix a bug :when set the parameter "app_interval" too big,MCU will restart.
RAK5205-WisTrio-LoRa firmware version 2.x.0.2
1.Fix "at+msg_confirm:x"was invalid bug.
2.Fix "at+set_config=pwr_level:x" was invalid bug.
RAK5205-WisTrio-LoRa firmware version 2.x.0.0
1.This Firmware is based on LoRaWAN 1.0.2 protocol ,support Class A and Class C mode.User could switch the mode by such as 'at+set_config=class:2' command,0:class A,1:class B(unsupported),2:class C.
It supports almost all frequency bands:(HF)->EU868, US915, AU915, KR920, AS923，IN865. (LF)->EU433，CN470.
2.The Firmware folder contains RAK5205 newest firmwares.
"RAK811_HF_trackerboard_V2.0.0.5.bin" surpport region:EU868, US915, AU915, KR920, AS923，IN865. "RAK811_LF_trackerboard_V2.1.0.5.bin" surpport region:EU433，CN470. "_V2.x.0.y" in the firmware name means the version number.
Tips： Region switch by such as"at+band=EU868"command.
AT command refer to RAK811 Lora AT Command V1.4.pdf.
3.Method of The Demo project generates different firmware refer to ReleaseNotes.txt.
4.the manual of RAK5205-WisTrio-LoRa refer to RAK5205_User_Manual_V1.6.pdf
Overview
The main features are listed below：
Compatible with 96Boards IoT Edition Specification.
With SX1276 LoRa long range and L76-L GPS modems which allow to enable the
GPS low power mode.
Integrated the ultra-low power microcontroller ARM Cortex-M3 STM32L1.
Built-in environmental sensor BME680 (gas, pressure, humidity, temperature) and
3-axis MEMS sensor LIS3DH (accelerometer).
SMA/IPEX antenna optional for LoRa and GPS.
Supports latest LoRaWAN 1.0.2 protocol, activation by OTAA/ABP.
Supports programmable bit rate up to 300kbps.
Supports rechargeable battery through micro USB or 5V solar charging ports.
Supports sleep mode, the power consumption down to 16μA.
Supports global license-free ISM band (EU433, CN470, EU868, US915, AS923,
AU915, KR920 and IN865).
Supports I2C, GPIOs, UART and ADC interfaces
RAK5205 hardware specification: https://www.rakwireless.com/en/download/LoRa/WisTrio-LoRa-RAK5205#Hardware_Specification
BTW, there is a very interesting tutorial for RAK5205 Wistrio made by Manivannan Sadhasivam: https://github.com/Mani-Sadhasivam/zephyr/blob/96b_wistrio/boards/arm/96b_wistrio/doc/96b_wistrio.rst