Update README.md

install/README.md

@@ -4,7 +4,7 @@ This folder holds all files necessary for immediate installation on your Time Ci
 
 ## Firmware Installation
 
-If a previous version of the Time Circuits Display firmware is installed on your device, you can update easily using the pre-compiled binary. Enter the [Config Portal](#the-config-portal), click on "Update" and select the pre-compiled binary file provided in this repository ([install/timecircuits-A10001986.ino.nodemcu-32s.bin](https://github.com/realA10001986/Time-Circuits-Display/blob/main/install/timecircuits-A10001986.ino.nodemcu-32s.bin)). 
+If a previous version of the Time Circuits Display firmware is installed on your device, you can update easily using the pre-compiled binary. Enter the Config Portal, click on "Update" and select the pre-compiled binary file provided in this repository ([install/timecircuits-A10001986.ino.nodemcu-32s.bin](https://github.com/realA10001986/Time-Circuits-Display/blob/main/install/timecircuits-A10001986.ino.nodemcu-32s.bin)). 
 
 >If the previously installed firmware was from CircuitSetup (ie. pre-installed or downloaded from their github), you need to install the sound-pack from this repository afterwards.
 
@@ -20,7 +20,7 @@ The first step is to download "install/sound-pack-xxxxxxxx.zip" and extract it.
 
 Then there are two alternative ways to proceed. Note that both methods *require an SD card*.
 
-1) Through the [Config Portal](#the-config-portal). Click on *Update*, select the "TCDA.bin" file in the bottom file selector and click on *Upload*. Note that an SD card must be in the slot during this operation.
+1) Through the Config Portal. Click on *Update*, select the "TCDA.bin" file in the bottom file selector and click on *Upload*. Note that an SD card must be in the slot during this operation.
 
 2) Via SD card:
 - Copy "TCDA.bin" to the root directory of of a FAT32 formatted SD card;