LASER.sdc

# operating conditions and boundary conditions #

set cycle 8.0
create_clock -name CLK  -period $cycle   [get_ports  CLK] 

set_dont_touch_network      [all_clocks]
set_fix_hold                [all_clocks]
set_clock_uncertainty  0.1  [all_clocks]
set_clock_latency      0.5  [all_clocks]
set_ideal_network           [get_ports CLK]


#Don't touch the basic env setting as below
set_input_delay  1   -clock CLK [remove_from_collection [all_inputs] [get_ports CLK]] 
set_output_delay 1    -clock CLK [all_outputs]  

set_load         1   [all_outputs]
set_drive        0.1   [all_inputs]

set_operating_conditions -max_library slow -max slow
set_wire_load_model -name tsmc13_wl10 -library slow                        
#set_max_fanout 20 [all_inputs]