README

                Information about the xotd package                                
Stephane Fillod's Original README as is - Shaun July 2007

                             Notes
                             -----

This is xotd 0.04, the third release of the XOT daemon for Linux.
Please test it as much as possible and report me success stories!
I'd be interested to hear about tests with Cisco routers, and other XOT 
implementation like SUNlink.

You need recent kernel 2.1.1xx or later to use this program.  This program
should compile cleanly with either libc5 and glibc (please send
me reports).

xotd requires the x25tap patch to be applied to the kernel (2.1.115+).
With this patch, it is possible to have an X.25 device driver in 
user land, and build bridging systems. x25tap is cloned from ethertap.

	cd /usr/src
	patch -p0 < x25tap.diff

So rebuild your patched kernel with the following options:

	Kernel/User netlink socket (CONFIG_NETLINK) [Y/n/?]
	CCITT X.25 Packet Layer (EXPERIMENTAL) (CONFIG_X25) [M/n/y/?]
	X.25tap network tap (CONFIG_X25TAP) [M/n/y/?]

Next, to compile xotd, just type "make". Since xotd is a multithreaded program,
the LinuxThreads library must be installed (builtin glibc-2.x).



[ Programming discussion:

xotd could be coded as a monothreaded program, but IMHO, a select on more
than 30 sockets and is not very efficient, and waiting to read entirely a big 
packet waste to much time. Buffering is rather painfull. fork()ing would be 
much simpler, but sharing the hash table wouldn't be easy.
To my mind, the multithreaded program is a good compromise, and
obviously, the best solution would be to code xotd as a kernel thread
and get rid of x25tap. It's not for tomorrow, but maybe for the day after
tomorrow :-)

End of discussion ]


There is a patch also for X.25 support in net-tools. The patch was
made for net-tools 1.45, so expect it to be merged by the following
releases.
x25-utils should work too, but is obsoleted by the previous patch.


For people having Cisco routers, here is a mail from Pasi, which 
explain how XOT works:

From: Pasi Kaara <[email protected]>
Date: Sat, 19 Aug 95 14:09:44 EETDST

Normal use of XOT

host ---x.25-line---[CISCO]--WAN/LAN link (TCP/IP)--[CISCO]---x.25-line-- host

With rfc1613 software on Linux:

   Linux ---LAN---[CISCO]--x.25--line (serial)

On the cisco side your configuration is like:

-------------
x25 route 244123456.* ip <ip-number of linux machine>
-------------
Only ONE line!

You can use also normal IP-access-lists to controll access to XOT port.


On the Linux side, here is how to add a default route:

	insmod x25tap
	ifconfig x25tap0 up
	xotd x25tap0 <ip-number of Cisco router>
	route --x25 add 0/0 x25tap0



Don't forget to insert x25 and x25tap modules before (if compiled as modules).

xotd can also work in "loopback", that is working on a stand alone machine, 
but you will be connected only with yourself! It is only for debugging
purpose, or to play with X.25 sockets (educational purpose, etc.).
Even if the command "xotd x25tap0 localhost" works, the X.25 stack
would be in collision because of the LCI numbers.

So, the workaround for XOT loopback, is the following:

	insmod x25tap
	ifconfig x25tap0 up
	route --x25 add 123/3 x25tap0

	insmod -o x25tap1  x25tap unit=1
	ifconfig x25tap1 up
	route --x25 add 2080/4 x25tap1

	xotd -l 1999 x25tap0 localhost  & xotd -r 1999 x25tap1 localhost &

This trick is not supported, and should be used only for debugging purposes!


Have fun with it, and please report bugs, success stories, patches; I'd
really appreciate!


Stephane Fillod
[email protected]
8 January 1999