WBO colors

rusefi · Nov 6, 2023 · c4105da · c4105da
1 parent afd2062
commit c4105da
Showing 1 changed file with 6 additions and 6 deletions.
diff --git a/WBO.md b/WBO.md
@@ -68,17 +68,17 @@ though you could probably use D=0 since the system is already damped so hard
 
 ## Naming Convention
 
-pin 1: IP=Pump Current
+pin 1 red: IP=Pump Current
 
-pin 2: VS/IP=VM=common virtual ground for VS and IP
+pin 2 yellow: VS/IP=VM=common virtual ground for VS and IP
 
-pin 3: H- Heater control, low-side
+pin 3 white: H- Heater control, low-side
 
-pin 4: H+ Constant +12v
+pin 4 grey: H+ Constant +12v
 
-pin 5: R Trim=Calibration resistor
+pin 5 green: R Trim=Calibration resistor
 
-pin 6: UN = Vs = sensor voltage output = INRC
+pin 6 black: UN = Vs = sensor voltage output = INRC
 
 4.9 pinout courtesy of [https://www.wbo2.com/cable/lsuconns.htm](https://www.wbo2.com/cable/lsuconns.htm)