Using this collector, netdata can collect data from any SNMP device.
This collector supports:
- any number of SNMP devices
- each SNMP device can be used to collect data for any number of charts
- each chart may have any number of dimensions
- each SNMP device may have a different update frequency
- each SNMP device will accept one or more batches to report values (you can set
max_request_sizeper SNMP server, to control the size of batches).
You will need to create the file /etc/netdata/node.d/snmp.conf with data like the following.
In this example:
- the SNMP device is
10.11.12.8. - the SNMP community is
public. - we will update the values every 10 seconds (
update_every: 10under the server10.11.12.8). - we define 2 charts
snmp_switch.bandwidth_port1andsnmp_switch.bandwidth_port2, each having 2 dimensions:inandout.
{
"enable_autodetect": false,
"update_every": 5,
"max_request_size": 100,
"servers": [
{
"hostname": "10.11.12.8",
"community": "public",
"update_every": 10,
"max_request_size": 50,
"options": { "timeout": 10000 },
"charts": {
"snmp_switch.bandwidth_port1": {
"title": "Switch Bandwidth for port 1",
"units": "kilobits/s",
"type": "area",
"priority": 1,
"family": "ports",
"dimensions": {
"in": {
"oid": "1.3.6.1.2.1.2.2.1.10.1",
"algorithm": "incremental",
"multiplier": 8,
"divisor": 1024,
"offset": 0
},
"out": {
"oid": "1.3.6.1.2.1.2.2.1.16.1",
"algorithm": "incremental",
"multiplier": -8,
"divisor": 1024,
"offset": 0
}
}
},
"snmp_switch.bandwidth_port2": {
"title": "Switch Bandwidth for port 2",
"units": "kilobits/s",
"type": "area",
"priority": 1,
"family": "ports",
"dimensions": {
"in": {
"oid": "1.3.6.1.2.1.2.2.1.10.2",
"algorithm": "incremental",
"multiplier": 8,
"divisor": 1024,
"offset": 0
},
"out": {
"oid": "1.3.6.1.2.1.2.2.1.16.2",
"algorithm": "incremental",
"multiplier": -8,
"divisor": 1024,
"offset": 0
}
}
}
}
}
]
}update_every is the update frequency for each server, in seconds.
max_request_size limits the maximum number of OIDs that will be requested in a single call. The default is 50. Lower this number of you get TooBig errors in netdata error.log.
family sets the name of the submenu of the dashboard each chart will appear under.
If you need to define many charts using incremental OIDs, you can use something like this:
This is like the previous, but the option multiply_range given, will multiply the current chart from 1 to 24 inclusive, producing 24 charts in total for the 24 ports of the switch 10.11.12.8.
Each of the 24 new charts will have its id (1-24) appended at:
- its chart unique id, i.e.
snmp_switch.bandwidth_port1tosnmp_switch.bandwidth_port24 - its
title, i.e.Switch Bandwidth for port 1toSwitch Bandwidth for port 24 - its
oid(for all dimensions), i.e. dimensioninwill be1.3.6.1.2.1.2.2.1.10.1to1.3.6.1.2.1.2.2.1.10.24 - its priority (which will be incremented for each chart so that the charts will appear on the dashboard in this order)
{
"enable_autodetect": false,
"update_every": 10,
"servers": [
{
"hostname": "10.11.12.8",
"community": "public",
"update_every": 10,
"options": { "timeout": 20000 },
"charts": {
"snmp_switch.bandwidth_port": {
"title": "Switch Bandwidth for port ",
"units": "kilobits/s",
"type": "area",
"priority": 1,
"family": "ports",
"multiply_range": [ 1, 24 ],
"dimensions": {
"in": {
"oid": "1.3.6.1.2.1.2.2.1.10.",
"algorithm": "incremental",
"multiplier": 8,
"divisor": 1024,
"offset": 0
},
"out": {
"oid": "1.3.6.1.2.1.2.2.1.16.",
"algorithm": "incremental",
"multiplier": -8,
"divisor": 1024,
"offset": 0
}
}
}
}
}
]
}The options given for each server, are:
timeout, the time to wait for the SNMP device to respond. The default is 5000 ms.version, the SNMP version to use.0is Version 1,1is Version 2c. The default is Version 1 (0).transport, the default isudp4.port, the port of the SNMP device to connect to. The default is161.retries, the number of attempts to make to fetch the data. The default is1.
You can append a value retrieved from SNMP to the title, by adding titleoid to the chart.
You can set a dimension name to a value retrieved from SNMP, by adding oidname to the dimension.
Both of the above will participate in multiply_range.
To test it, you can run:
/usr/libexec/netdata/plugins.d/node.d.plugin 1 snmpThe above will run it on your console and you will be able to see what netdata sees, but also errors. You can get a very detailed output by appending debug to the command line.
If it works, restart netdata to activate the snmp collector and refresh the dashboard (if your SNMP device responds with a delay, you may need to refresh the dashboard in a few seconds).
Keep in mind that many SNMP switches and routers are very slow. They may not be able to report values per second. If you run node.d.plugin in debug mode, it will report the time it took for the SNMP device to respond. My switch, for example, needs 7-8 seconds to respond for the traffic on 24 ports (48 OIDs, in/out).
Also, if you use many SNMP clients on the same SNMP device at the same time, values may be skipped. This is a problem of the SNMP device, not this collector.
Use snmpwalk, like this:
snmpwalk -t 20 -v 1 -O fn -c public 10.11.12.8-t 20is the timeout in seconds-v 1is the SNMP version-O fnwill display full OIDs in numeric format (you may want to run it also without this option to see human readable output of OIDs)-c publicis the SNMP community10.11.12.8is the SNMP device
Keep in mind that snmpwalk outputs the OIDs with a dot in front them. You should remove this dot when adding OIDs to the configuration file of this collector.
This is what I use for my Linksys SRW2024P. It creates:
- A chart for power consumption (it is a PoE switch)
- Two charts for packets received (total packets received and packets received with errors)
- One chart for packets output
- 24 charts, one for each port of the switch. It also appends the port names, as defined at the switch, to the chart titles.
This switch also reports various other metrics, like snmp, packets per port, etc. Unfortunately it does not report CPU utilization or backplane utilization.
This switch has a very slow SNMP processors. To respond, it needs about 8 seconds, so I have set the refresh frequency (update_every) to 15 seconds.
{
"enable_autodetect": false,
"update_every": 5,
"servers": [
{
"hostname": "10.11.12.8",
"community": "public",
"update_every": 15,
"options": { "timeout": 20000, "version": 1 },
"charts": {
"snmp_switch.power": {
"title": "Switch Power Supply",
"units": "watts",
"type": "line",
"priority": 10,
"family": "power",
"dimensions": {
"supply": {
"oid": ".1.3.6.1.2.1.105.1.3.1.1.2.1",
"algorithm": "absolute",
"multiplier": 1,
"divisor": 1,
"offset": 0
},
"used": {
"oid": ".1.3.6.1.2.1.105.1.3.1.1.4.1",
"algorithm": "absolute",
"multiplier": 1,
"divisor": 1,
"offset": 0
}
}
}
, "snmp_switch.input": {
"title": "Switch Packets Input",
"units": "packets/s",
"type": "area",
"priority": 20,
"family": "IP",
"dimensions": {
"receives": {
"oid": ".1.3.6.1.2.1.4.3.0",
"algorithm": "incremental",
"multiplier": 1,
"divisor": 1,
"offset": 0
}
, "discards": {
"oid": ".1.3.6.1.2.1.4.8.0",
"algorithm": "incremental",
"multiplier": 1,
"divisor": 1,
"offset": 0
}
}
}
, "snmp_switch.input_errors": {
"title": "Switch Received Packets with Errors",
"units": "packets/s",
"type": "line",
"priority": 30,
"family": "IP",
"dimensions": {
"bad_header": {
"oid": ".1.3.6.1.2.1.4.4.0",
"algorithm": "incremental",
"multiplier": 1,
"divisor": 1,
"offset": 0
}
, "bad_address": {
"oid": ".1.3.6.1.2.1.4.5.0",
"algorithm": "incremental",
"multiplier": 1,
"divisor": 1,
"offset": 0
}
, "unknown_protocol": {
"oid": ".1.3.6.1.2.1.4.7.0",
"algorithm": "incremental",
"multiplier": 1,
"divisor": 1,
"offset": 0
}
}
}
, "snmp_switch.output": {
"title": "Switch Output Packets",
"units": "packets/s",
"type": "line",
"priority": 40,
"family": "IP",
"dimensions": {
"requests": {
"oid": ".1.3.6.1.2.1.4.10.0",
"algorithm": "incremental",
"multiplier": 1,
"divisor": 1,
"offset": 0
}
, "discards": {
"oid": ".1.3.6.1.2.1.4.11.0",
"algorithm": "incremental",
"multiplier": -1,
"divisor": 1,
"offset": 0
}
, "no_route": {
"oid": ".1.3.6.1.2.1.4.12.0",
"algorithm": "incremental",
"multiplier": -1,
"divisor": 1,
"offset": 0
}
}
}
, "snmp_switch.bandwidth_port": {
"title": "Switch Bandwidth for port ",
"titleoid": ".1.3.6.1.2.1.31.1.1.1.18.",
"units": "kilobits/s",
"type": "area",
"priority": 100,
"family": "ports",
"multiply_range": [ 1, 24 ],
"dimensions": {
"in": {
"oid": ".1.3.6.1.2.1.2.2.1.10.",
"algorithm": "incremental",
"multiplier": 8,
"divisor": 1024,
"offset": 0
}
, "out": {
"oid": ".1.3.6.1.2.1.2.2.1.16.",
"algorithm": "incremental",
"multiplier": -8,
"divisor": 1024,
"offset": 0
}
}
}
}
}
]
}