ScioSense ENS145 Development Shield

⚠️ This library is deprecated and no longer maintained.

Arduino library for the ENS145 Development Shield (analog MOX gas sensor) from ScioSense

Introduction

This project is an Arduino library. It implements a driver with examples for the ENS145 Development Shield. The ENS145 is a analog gas sensor. The driver in this Arduino library is based on the code supplied by Sciosense, the manufacturer of the chip.

Links

The ENS145 is made by Sciosense.

• The datasheet of the ENS145 is not yet released but can be provided on request

Prerequisites

It is assumed that

• The Arduino IDE has been installed. If not, refer to "Install the Arduino Desktop IDE" on the Arduino site.
• The library directory is at its default location. For me, that is C:\Users\sciosense\Documents\Arduino\libraries.

Installation

• Visit the project page for the Arduino ENS145 library.
• Click the green button Clone or download on the right side.
• From the pop-up choose Download ZIP.
• In Arduino IDE, select Sketch > Include Library > Manage Libraries ... and browse to the just downloaded ZIP file.
• When the IDE is ready this README.md should be located at e.g. C:\Users\sciosense\Documents\Arduino\libraries\ScioSense_ens145\README.md.

Build an example

To build an example sketch

• (Re)start Arduino.
• Open File > Example > Examples from Custom Libraries > ENS145 > ENS145_basic_read
• Make sure Tools > Board lists the correct board.
• Select Sketch > Verify/Compile.

ScioSense is a Joint Venture of ams AG