*It was created using pico-sdk and C language.
- This is the firmware for Raspberry Pico W.
- Pico W sends the following sensor data via a TCP socket at 5-second intervals.
- GPIO input value
- ADC value (voltage, Pico W temperature sensor)
- Data from Bosch's BME280 (temperature, humidity, and air pressure sensor)*
*If the BME280 is not connected, the BME280 data will be 0.
- The Pico W can act as both a TCP server and a TCP client.
- A dedicated PC app is used to set up the wireless LAN for Pico W.
- Please refer to the manual for usage.