Skip to content

Striso board firmware v2.2.0 - 2022-07-21
Compare
Choose a tag to compare
@pierstitus pierstitus released this 21 Jul 03:51
· 24 commits to main since this release
v2.2.0
99cd025

With release the way settings work has drastrically changed to allow more flexible settings and give better feedback.
More settings are added and the existing ones have more precise control.

The new system uses one button per setting, and uses the up/down leds to show the current value.
The value of a setting can be changed by nudging the key up or down.
Larger changes can be made by making a circular motion clockwise (up) or anticlockwise (down) with the key.

See the updated quick start guide for more information and an updated settings overview.

To update your Striso board, connect the USB cable with the settings (square) button pressed, now it should attach as a USB drive. To update the firmware just copy the attached .uf2 file to this drive, after which the device applies the update and resets.

Added

  • On board settings for MPE voice count, midi channel, tuning offset, MPE pitch bend range
  • Volume parameter in presets, and listen to MIDI CC7 - Volume
  • Send MPE and pitch bend range RPN messages on start, mode change, and send cfg key
  • Additional tuning offset parameter in presets

Changed

  • New settings system and layout
  • Configuration editor tweaks
  • Response to MIDI CC 126 Mono mode and 127 Poly mode changed
  • MIDI Mono mode on channel 2 by default to be more compatible with MPE
  • Send MIDI Program Change on all used channels for more compatibility with non MPE synths
Assets 4
Loading