Merge pull request #51 from suchmememanyskill/dev

v1.4.0

CYD-Klipper/.vscode/settings.json

@@ -12,6 +12,8 @@
         "algorithm": "cpp",
         "cstddef": "cpp",
         "functional": "cpp",
-        "*.tcc": "cpp"
-    }
+        "*.tcc": "cpp",
+        "cmath": "cpp"
+    },
+    "cmake.configureOnOpen": false
 }

CYD-Klipper/boards/esp32-2432S022C-smartdisplay.json

@@ -0,0 +1,126 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "esp32_out.ld"
+      },
+      "core": "esp32",
+      "extra_flags": [
+        "'-D ARDUINO_ESP32_DEV'",
+        "'-D ESP32_2432S022C'",
+        "'-D LCD_WIDTH=240'",
+        "'-D LCD_HEIGHT=320'",
+        "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/8)'",
+        "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
+        "'-D BCKL=0'",
+        "'-D LCD_ST7789_I80'",
+        "'-D ST7789_I80_BUS_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
+        "'-D ST7789_I80_BUS_CONFIG_DC=16'",
+        "'-D ST7789_I80_BUS_CONFIG_WR=4'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D8=15'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D9=13'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D10=12'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D11=14'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D12=27'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D13=25'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D14=33'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D15=32'",
+        "'-D ST7789_I80_BUS_CONFIG_BUS_WIDTH=8'",
+        "'-D ST7789_I80_BUS_CONFIG_MAX_TRANSFER_BYTES=(LVGL_BUFFER_PIXELS * sizeof(lv_color_t))'",
+        "'-D ST7789_I80_BUS_CONFIG_PSRAM_TRANS_ALIGN=64'",
+        "'-D ST7789_I80_BUS_CONFIG_SRAM_TRANS_ALIGN=4'",
+        "'-D ST7789_IO_I80_CONFIG_CS_GPIO_NUM=17'",
+        "'-D ST7789_IO_I80_CONFIG_PCLK_HZ=55000000'",
+        "'-D ST7789_IO_I80_CONFIG_TRANS_QUEUE_DEPTH=10'",
+        "'-D ST7789_IO_I80_CONFIG_LCD_CMD_BITS=8'",
+        "'-D ST7789_IO_I80_CONFIG_LCD_PARAM_BITS=8'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_IDLE_LEVEL=0'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_CMD_LEVEL=0'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_DUMMY_LEVEL=0'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_DATA_LEVEL=1'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_CS_ACTIVE_HIGH=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_REVERSE_COLOR_BITS=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_SWAP_COLOR_BYTES=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_ACTIVE_NEG=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_IDLE_LOW=0'",
+        "'-D ST7789_DEV_CONFIG_RESET_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D ST7789_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_BGR'",
+        "'-D ST7789_DEV_CONFIG_BITS_PER_PIXEL=16'",
+        "'-D ST7789_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
+        "'-D ST7789_DEV_CONFIG_VENDOR_CONFIG=NULL'",
+        "'-D ST7789_RD_GPIO=2'",
+        "'-D LCD_SWAP_XY=false'",
+        "'-D LCD_MIRROR_X=false'",
+        "'-D LCD_MIRROR_Y=false'",
+        "'-D BOARD_HAS_TOUCH'",
+        "'-D TOUCH_CST816S_I2C'",
+        "'-D CST816S_I2C_HOST=0'",
+        "'-D CST816S_I2C_CONFIG_SDA_IO_NUM=21'",
+        "'-D CST816S_I2C_CONFIG_SCL_IO_NUM=22'",
+        "'-D CST816S_I2C_CONFIG_SDA_PULLUP_EN=GPIO_PULLUP_ENABLE'",
+        "'-D CST816S_I2C_CONFIG_SCL_PULLUP_EN=GPIO_PULLUP_ENABLE'",
+        "'-D CST816S_I2C_CONFIG_MASTER_CLK_SPEED=400000'",
+        "'-D CST816S_I2C_CONFIG_CLK_FLAGS=0'",
+        "'-D CST816S_IO_I2C_CONFIG_DEV_ADDR=ESP_LCD_TOUCH_IO_I2C_CST816S_ADDRESS'",
+        "'-D CST816S_IO_I2C_CONFIG_CONTROL_PHASE_BYTES=1'",
+        "'-D CST816S_IO_I2C_CONFIG_DC_BIT_OFFSET=0'",
+        "'-D CST816S_IO_I2C_CONFIG_LCD_CMD_BITS=8'",
+        "'-D CST816S_IO_I2C_CONFIG_LCD_PARAM_BITS=0'",
+        "'-D CST816S_IO_I2C_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+        "'-D CST816S_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'",
+        "'-D CST816S_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
+        "'-D CST816S_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
+        "'-D CST816S_TOUCH_CONFIG_RST_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D CST816S_TOUCH_CONFIG_INT_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D CST816S_TOUCH_CONFIG_LEVELS_RESET=0'",
+        "'-D CST816S_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
+        "'-D TOUCH_SWAP_XY=false'",
+        "'-D TOUCH_SWAP_X=false'",
+        "'-D TOUCH_SWAP_Y=false'",
+        "'-D BOARD_HAS_TF'",
+        "'-D TF_CS=5'",
+        "'-D TF_SPI_MOSI=23'",
+        "'-D TF_SPI_SCLK=18'",
+        "'-D TF_SPI_MISO=19'",
+        "'-D BOARD_HAS_SPEAK'",
+        "'-D SPEAK=26'",
+
+        "-DCYD_SCREEN_GAP_PX=8",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=35",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=35",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_14",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_10",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=40",
+        "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1",
+        "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1",
+        "-DCYD_SCREEN_DISABLE_INVERT_COLORS=1"
+      ],
+      "f_cpu": "240000000L",
+      "f_flash": "40000000L",
+      "flash_mode": "dio",
+      "mcu": "esp32",
+      "variant": "esp32"
+    },
+    "connectivity": [
+      "wifi",
+      "bluetooth",
+      "ethernet",
+      "can"
+    ],
+    "debug": {
+      "openocd_board": "esp-wroom-32.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "espidf"
+    ],
+    "name": "esp32-2432S022C",
+    "upload": {
+      "flash_size": "4MB",
+      "maximum_ram_size": 327680,
+      "maximum_size": 4194304,
+      "require_upload_port": true,
+      "speed": 460800
+    },
+    "url": "https://www.aliexpress.com/item/1005006284154750.html",
+    "vendor": "Sunton"
+  }

CYD-Klipper/boards/esp32-2432S028R-smartdisplay.json

@@ -0,0 +1,126 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "esp32_out.ld"
+      },
+      "core": "esp32",
+      "extra_flags": [
+        "'-D ARDUINO_ESP32_DEV'",
+        "'-D ESP32_2432S028Rv3'",
+        "'-D LCD_WIDTH=240'",
+        "'-D LCD_HEIGHT=320'",
+        "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
+        "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
+        "'-D BCKL=21'",
+        "'-D LCD_ST7789_SPI'",
+        "'-D ST7789_SPI_HOST=SPI2_HOST'",
+        "'-D ST7789_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",
+        "'-D ST7789_SPI_BUS_MOSI_IO_NUM=13'",
+        "'-D ST7789_SPI_BUS_MISO_IO_NUM=GPIO_NUM_NC'",
+        "'-D ST7789_SPI_BUS_SCLK_IO_NUM=14'",
+        "'-D ST7789_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
+        "'-D ST7789_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
+        "'-D ST7789_SPI_BUS_MAX_TRANSFER_SZ=0'",
+        "'-D ST7789_SPI_BUS_FLAGS=0'",
+        "'-D ST7789_SPI_BUS_INTR_FLAGS=0'",
+        "'-D ST7789_SPI_CONFIG_CS_GPIO_NUM=15'",
+        "'-D ST7789_SPI_CONFIG_DC_GPIO_NUM=2'",
+        "'-D ST7789_SPI_CONFIG_SPI_MODE=SPI_MODE3'",
+        "'-D ST7789_SPI_CONFIG_PCLK_HZ=55000000'",
+        "'-D ST7789_SPI_CONFIG_TRANS_QUEUE_DEPTH=10'",
+        "'-D ST7789_SPI_CONFIG_LCD_CMD_BITS=8'",
+        "'-D ST7789_SPI_CONFIG_LCD_PARAM_BITS=8'",
+        "'-D ST7789_SPI_CONFIG_FLAGS_DC_AS_CMD_PHASE=false'",
+        "'-D ST7789_SPI_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+        "'-D ST7789_SPI_CONFIG_FLAGS_OCTAL_MODE=false'",
+        "'-D ST7789_SPI_CONFIG_FLAGS_LSB_FIRST=false'",
+        "'-D ST7789_DEV_CONFIG_RESET_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D ST7789_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_RGB'",
+        "'-D ST7789_DEV_CONFIG_BITS_PER_PIXEL=16'",
+        "'-D ST7789_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
+        "'-D ST7789_DEV_CONFIG_VENDOR_CONFIG=NULL'",
+        "'-D LCD_SWAP_XY=false'",
+        "'-D LCD_MIRROR_X=false'",
+        "'-D LCD_MIRROR_Y=false'",
+        "'-D BOARD_HAS_TOUCH'",
+        "'-D TOUCH_XPT2046_SPI'",
+        "'-D XPT2046_SPI_HOST=SPI3_HOST'",
+        "'-D XPT2046_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",      
+        "'-D XPT2046_SPI_BUS_MOSI_IO_NUM=32'",
+        "'-D XPT2046_SPI_BUS_MISO_IO_NUM=39'",
+        "'-D XPT2046_SPI_BUS_SCLK_IO_NUM=25'",
+        "'-D XPT2046_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
+        "'-D XPT2046_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
+        "'-D XPT2046_SPI_CONFIG_CS_GPIO_NUM=33'",
+        "'-D XPT2046_SPI_CONFIG_DC_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D XPT2046_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
+        "'-D XPT2046_SPI_CONFIG_PCLK_HZ=2000000'",
+        "'-D XPT2046_SPI_CONFIG_TRANS_QUEUE_DEPTH=3'",
+        "'-D XPT2046_SPI_CONFIG_LCD_CMD_BITS=8'",
+        "'-D XPT2046_SPI_CONFIG_LCD_PARAM_BITS=8'",
+        "'-D XPT2046_SPI_CONFIG_FLAGS_DC_AS_CMD_PHASE=false'",
+        "'-D XPT2046_SPI_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+        "'-D XPT2046_SPI_CONFIG_FLAGS_OCTAL_MODE=false'",
+        "'-D XPT2046_SPI_CONFIG_FLAGS_LSB_FIRST=false'",
+        "'-D XPT2046_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
+        "'-D XPT2046_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
+        "'-D XPT2046_TOUCH_CONFIG_RST_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D XPT2046_TOUCH_CONFIG_INT_GPIO_NUM=36'",
+        "'-D XPT2046_TOUCH_CONFIG_LEVELS_RESET=0'",
+        "'-D XPT2046_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
+        "'-D TOUCH_SWAP_XY=true'",
+        "'-D TOUCH_SWAP_X=true'",
+        "'-D TOUCH_SWAP_Y=false'",
+        "'-D BOARD_HAS_TF'",
+        "'-D TF_CS=5'",
+        "'-D TF_SPI_MOSI=23'",
+        "'-D TF_SPI_SCLK=18'",
+        "'-D TF_SPI_MISO=19'",
+        "'-D BOARD_HAS_RGB_LED'",
+        "'-D RGB_LED_R=4'",
+        "'-D RGB_LED_G=16'",
+        "'-D RGB_LED_B=17'",
+        "'-D BOARD_HAS_CDS'",
+        "'-D CDS=34'",
+        "'-D BOARD_HAS_SPEAK'",
+        "'-D SPEAK=26'",
+
+        "-DCYD_SCREEN_GAP_PX=8",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=35",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=35",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_14",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_10",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=40",
+        "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1",
+        "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1"
+      ],
+      "f_cpu": "240000000L",
+      "f_flash": "40000000L",
+      "flash_mode": "dio",
+      "mcu": "esp32",
+      "variant": "esp32"
+    },
+    "connectivity": [
+      "wifi",
+      "bluetooth",
+      "ethernet",
+      "can"
+    ],
+    "debug": {
+      "openocd_board": "esp-wroom-32.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "espidf"
+    ],
+    "name": "esp32-2432S028Rv3",
+    "upload": {
+      "flash_size": "4MB",
+      "maximum_ram_size": 327680,
+      "maximum_size": 4194304,
+      "require_upload_port": true,
+      "speed": 460800
+    },
+    "url": "https://www.aliexpress.com/item/1005004502250619.html",
+    "vendor": "Sunton"
+  }

CYD-Klipper/boards/esp32-2432S028R.json

@@ -16,9 +16,6 @@
         "-DTFT_DC=2",
         "-DTFT_RST=-1",
         "-DLOAD_GCLD=1",
-        "-DLOAD_FONT2=1",
-        "-DLOAD_GFXFF=1",
-        "-DSMOOTH_FONT=1",
         "-DSPI_FREQUENCY=55000000",
         "-DSPI_READ_FREQUENCY=20000000",
         "-DSPI_TOUCH_FREQUENCY=2500000",

CYD-Klipper/boards/esp32-3248S035C-smartdisplay.json

@@ -21,7 +21,7 @@
         "'-D ST7796_SPI_CONFIG_CS_GPIO_NUM=15'",
         "'-D ST7796_SPI_CONFIG_DC_GPIO_NUM=2'",
         "'-D ST7796_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
-        "'-D ST7796_SPI_CONFIG_PCLK_HZ=24000000'",
+        "'-D ST7796_SPI_CONFIG_PCLK_HZ=80000000'",
         "'-D ST7796_SPI_CONFIG_TRANS_QUEUE_DEPTH=10'",
         "'-D ST7796_SPI_CONFIG_LCD_CMD_BITS=8'",
         "'-D ST7796_SPI_CONFIG_LCD_PARAM_BITS=8'",
@@ -74,7 +74,17 @@
         "'-D BOARD_HAS_CDS'",
         "'-D CDS=34'",
         "'-D BOARD_HAS_SPEAK'",
-        "'-D SPEAK=26'"
+        "'-D SPEAK=26'",
+
+        "-DCYD_SCREEN_GAP_PX=10",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=40",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=40",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_16",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_12",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=50",
+        "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1",
+        "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1",
+        "-DCYD_SCREEN_DISABLE_INVERT_COLORS=1"
       ],
       "f_cpu": "240000000L",
       "f_flash": "40000000L",

CYD-Klipper/boards/esp32-3248S035C.json

@@ -16,9 +16,6 @@
         "-DTFT_DC=2",
         "-DTFT_RST=-1",
         "-DLOAD_GCLD=1",
-        "-DLOAD_FONT2=1",
-        "-DLOAD_GFXFF=1",
-        "-DSMOOTH_FONT=1",
         "-DSPI_FREQUENCY=80000000",
         "-DSPI_READ_FREQUENCY=20000000",
         "-DSPI_TOUCH_FREQUENCY=2500000",

CYD-Klipper/extract_commit.py

@@ -15,11 +15,17 @@ def extract_commit() -> str:
     version = "Unknown"
 
 flag = "-D REPO_VERSION=\\\"" + version + "\\\""
+dev_flag = "-DREPO_DEVELOPMENT=1"
 print(f"Version: {version}")
 print(f"Flag: {flag}")
 
+flags = [flag]
+
+if ('(' in version):
+    flags.append(dev_flag)
+
 Import("env")
 
 env.Append(
-    BUILD_FLAGS=[flag]
+    BUILD_FLAGS=flags
 )

CYD-Klipper/platformio.ini

@@ -21,7 +21,7 @@ monitor_filters = esp32_exception_decoder
 build_flags = 
 	-DLV_CONF_PATH="../../../../src/conf/lv_conf.h"
 extra_scripts = 
-    pre:extract_commit.py
+	pre:extract_commit.py
 
 [env:esp32-2432S028R]
 board = esp32-2432S028R
@@ -43,17 +43,8 @@ lib_deps =
 	bblanchon/ArduinoJson@^7.0.0
 	plageoj/UrlEncode@^1.0.1
 
-# Terribly slow. Only use for development
-# [env:esp32-3248S035C-smartdisplay]
-# board = esp32-3248S035C-smartdisplay
-# build_flags = 
-# 	-DLV_CONF_PATH="../../../../src/conf/lv_conf.h"
-# 	-DCYD_SCREEN_HEIGHT_PX=320
-# 	-DCYD_SCREEN_WIDTH_PX=480
-# 	-DCYD_SCREEN_GAP_PX=10
-# 	-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=40
-# 	-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=40
-# 	-DCYD_SCREEN_FONT=lv_font_montserrat_16
-# 	-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_12
-# 	-DCYD_SCREEN_SIDEBAR_SIZE_PX=50
-# 	-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1
+[env:esp32-3248S035C-smartdisplay]
+board = esp32-3248S035C-smartdisplay
+
+[env:esp32-2432S028R-smartdisplay]
+board = esp32-2432S028R-smartdisplay