Skip to content
/ ALARA Public

Simulation of transmutation and decay in nuclear systems

License

Unknown, Unknown licenses found

Licenses found

Unknown
LICENSE
Unknown
COPYING
Notifications You must be signed in to change notification settings

svalinn/ALARA

Repository files navigation

$Id: README,v 1.5 2005-01-17 22:11:04 wilsonp Exp $

Analytic and Laplacian Adaptive Radioactivity Analysis (ALARA)

Thank you for your interest in ALARA.

The primary purpose of ALARA is to calculate the induced activation caused by neutron irradiation throughout a nuclear system (including fission reactors, fusion reactors, and accelerators). Some projects currently using ALARA include ARIES, IFMIF and the Z-Pinch Power Plant study.

Special Features of ALARA

ALARA takes full advantage of being a newly developed code by implementing the best features of the previous generation of activation codes and, at the same time, addressing their various weaknesses. Furthermore, an entirely new set of features has been implemented and continued development will allow it to respond to the evolving needs of the entire user community. ALARA's three main design principles are accuracy, speed, and usability. ALARA matches the previous generation of activation codes in accuracy and is much faster. This is achieved by adaptively choosing the mathematical method at the smallest resolution in order to optimize both speed and accuracy.

ALARA distinguishes itself by including unique capabilities that are useful to engineers and designers:

  • unlimited number of reaction channels
  • exact modeling of hierarchical arbitrary irradiation schedules
  • reverse calculation mode

ALARA implements many of the standard features of activation codes including:

  • multi-point (3-D) solutions in a variety of geometries
  • accurate solution of loops in activation trees
  • exact modeling of multi-level pulsing irradiation histories
  • user-defined calculation precision/accuracy
  • tracking the accumulation of light ions
  • straightforward, user-friendly input file creation
  • full, easy-to-read activation tree output (not just pathway analysis)
  • flexible output options NOW including the direct calculation of waste disposal ratings and clearance indices.

Build and Install

Requirements

ALARA is written primarily in C++ with one or two FORTRAN77 routines. All development is done with the GNU C++ and FORTRAN compilers and it has been tested and is known to work on Linux and Solaris.

The following pieces of software are required in order to build ALARA:

  • C++ compiler
  • Fortran compiler
  • CMake

Installation Process

Here are some commands that can be used to build ALARA.

$ INSTALL_PREFIX=${PWD}
$ git clone https://github.com/svalinn/ALARA
$ mkdir bld
$ cd bld
$ cmake ../ALARA -DCMAKE_INSTALL_PREFIX=${INSTALL_PREFIX}
$ make
$ make install

Test Install

Several sample ALARA problems are installed to the sample directory as part of the install process. Here are some commands that can be used to run these sample problems.

$ cd ../sample
$ ./run_samples.sh

If the sample problems run without errors, the following output should appear on the command line.

ALARA 2.9.2
sample1
sample2
sample3
sample4
sample5
sample6
sample7
sample8
sample9

Output files from the sample problems can be checked against known correct output files by running the diff script.

$ ./diff_output.sh

Any diffs between the files will be shown as output on the command line.

NOTE: the data in the sample folder is not suitable for real calculations and is a truncated library just for the purpose of these tests.

Running ALARA

Running ALARA can be done in one command line with various options.

$ alara [-h] [-r] [-t <tree_filename>] [-V] [-v <n>] [<input_filename>]

Please reference the users' guide for specific options and more information.

Additional Notes

In addition to building and installing the ALARA program, this package includes an accessory program, dant2alara, and a pair of Perl scripts for post-processing data.

dant2alara is an interactive program for converting RTFLUX/ATFLUX files (from DANTSYS and similar) to text based flux files for use in ALARA. Since ALARA can read RTFLUX files directly, this use may not be useful. On the other hand, the biological dose method requires ggamma source to dose conversion factors from an ATFLUX type file, which can not be handled directly by ALARA at this time.

extract_pathways is a Perl script that scans an ASCII tree file and finds all the chains/pathways that result in a given isotope.

summary is a Perl script that extracts a summary of the output file, most notably removing all results for individual isotopes and leaving all totals. You can also extract results for a single specific isotopes by giving the argument "-iso" followed by the isotope in question written as a lower case atomic symbol hyphenated with the mass number. e.g. tritium is h-3.

More Information

Please visit the ALARA homepage for more information regarding all of the above topics.

About

Simulation of transmutation and decay in nuclear systems

Resources

License

Unknown, Unknown licenses found

Licenses found

Unknown
LICENSE
Unknown
COPYING

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published