Skip to content

technotiger/kmip-server-dsm

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

7 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

KMIP Server for Synology DSM

This container implements a private KMIP server for Synology DSM to store Encryption Key Vault. By default, DSM will offer you to store your vault on the same disks where you have encrypted data, which is a big security risk, or to store it on another Synology NAS somewhere online, which may not be convenient for most of setups. This KMIP server is very easy to use and can be started on a small Raspberry Pi like computer, where you will have your own way of protecting KMIP server itself, for example store it on LUKS partition and do not automount it on reboots.

Minumum version of Synology DSM that works correctly with this KMIP server is DSM 7.2-64570.

Based on PyKMIP project.

Installation

You will need a Linux computer/board/VM with Git, and Podman or Docker. There are no other requirements. This container does not pollute your system, and only touches files in the directory where it was started from.

  1. Clone this repository
$ git clone https://github.com/rnurgaliyev/kmip-server-dsm
$ cd kmip-server-dsm
  1. Review configuration file with your favorite text editor (important!)
$ vim ./config.sh
  1. Build the container. I do not provide any binary images since you don't want to entrust your secrets to unknown binaries. Insted, study the content of this repository to feel good about it, and build yourself a KMIP server:
$ ./build-container.sh
  1. Run the container
$ ./run-container.sh

Where is my data stored?

All keys and certificates will be stored in the certs directory, and KMIP database itself in the state directory. Both of these directories are mounted into KMIP server container. You may stop and remove running container, but your certificates and data will not be lost. It is in your interest to keep this repository with these directories in a safe place - for example in encrypted file system or RAM disk. You can always wipe contents of these directories and start from scratch, if you have recovery keys for your NAS volumes.

Synology DSM configuration

Shortly after starting container for the first time, some SSL keys and certificates will be generated in the certs directory. You will need to copy these files to put them into your NAS:

  • client.key
  • client.crt
  • ca.crt

Connect to your DSM web interface and go to Control Panel -> Security -> Certificate. Click Add, then Add a new certificate, enter KMIP in the Description field, then Import certificate. Choose client.key file for Private key, client.crt for Certificate, and ca.crt for Intermediate certificate. Then click Settings, and choose newly imported certificate for KMIP.

Switch to the KMIP tab, and configure Remote Key Client. Hostname is the address of this KMIP server, port is 5696, and choose ca.crt file another time for Certificate Authority.

You should now have fully working remote Encryption Key Vault.

Troubleshooting

On DSM side:

  1. Connect to your NAS via SSH
  2. Check logs of kmip service:
$ sudo journalctl -u kmip.service -ef

On KMIP server side:

  1. Jump into the container (replace podman with docker if needed):
$ podman exec -ti dsm-kmip-server /bin/sh
  1. Check pykmip logs:
$ cat /var/log/pykmip/server.log

Tips on creating encrypted storage on Raspberry Pi

These are tips on how to create an encrypted file system on Raspberry Pi where you can store your KMIP server. These steps can be adjusted for any other kind of computer or VM.

  1. Download Ubuntu Server image for Raspebby Pi from the Ubuntu website.

  2. Write the image to an SD card. Before rebooting, plug the SD card into existing Linux machine. We will play with partitioning table a little bit. Assuming your SD card is /dev/sdc:

$ xz -d ubuntu-22.04.2-preinstalled-server-arm64+raspi.img.xz
$ sudo dd if=./ubuntu-22.04.2-preinstalled-server-arm64+raspi.img of=/dev/sdc status=progress
  1. Assuming your SD card is /dev/sdc, start fdisk:
$ sudo fdisk /dev/sdc

Welcome to fdisk (util-linux 2.38.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.


Command (m for help): 
  1. List partitions and note where the second partition starts, we will need this address later:
Command (m for help): p
Disk /dev/sdc: 58,63 GiB, 62948114432 bytes, 122945536 sectors
Disk model: Micro blackhole based storage
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x12c9124a

Device     Boot  Start     End Sectors  Size Id Type
/dev/sdc1  *      2048  526335  524288  256M  c W95 FAT32 (LBA)
/dev/sdc2       526336 8074399 7548064  3,6G 83 Linux

Command (m for help): 

Note that /dev/sdc2 starts at 526336.

  1. Delete the second partition:
Command (m for help): d
Partition number (1,2, default 2): 2

Partition 2 has been deleted.
  1. Create a new partition. Make sure to start new partion exactly on the same sector where the old one was. Decide how much space do you want to leave for the encrypted storage, and enter this in the Last sector with the minus sign, in the example below I left 8 gigabytes at the end of the disk:
Command (m for help): n
Partition type
   p   primary (1 primary, 0 extended, 3 free)
   e   extended (container for logical partitions)
Select (default p): p
Partition number (2-4, default 2): 2
First sector (526336-122945535, default 526336): 526336
Last sector, +/-sectors or +/-size{K,M,G,T,P} (526336-122945535, default 122945535): -8G

Created a new partition 2 of type 'Linux' and of size 50,4 GiB.
Partition #2 contains a ext4 signature.

Do you want to remove the signature? [Y]es/[N]o: No

Command (m for help): 

Make sure to answer NO when you are asked if you want to wipe existing file system signature.

  1. Now create the last partition, that you will use for your encrypted storage. Just hit ENTER on all questions:
Command (m for help): n
Partition type
   p   primary (2 primary, 0 extended, 2 free)
   e   extended (container for logical partitions)
Select (default p): 

Using default response p.
Partition number (3,4, default 3): 
First sector (106168320-122945535, default 106168320): 
Last sector, +/-sectors or +/-size{K,M,G,T,P} (106168320-122945535, default 122945535): 

Created a new partition 3 of type 'Linux' and of size 8 GiB.

Command (m for help): 
  1. Now you have an SD card with boot, root, and encrypted partition. Check if everything looks fine and write changes to disk:
Command (m for help): p
Disk /dev/sdc: 58,63 GiB, 62948114432 bytes, 122945536 sectors
Disk model: Micro blackhole based storage
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x12c9124a

Device     Boot     Start       End   Sectors  Size Id Type
/dev/sdc1  *         2048    526335    524288  256M  c W95 FAT32 (LBA)
/dev/sdc2          526336 106168319 105641984 50,4G 83 Linux
/dev/sdc3       106168320 122945535  16777216    8G 83 Linux

Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
  1. Last step before booting your Raspberry Pi with this SD card is to expand root partition:
$ sudo resize2fs /dev/sdc2
resize2fs 1.47.0 (5-Feb-2023)
Resizing the filesystem on /dev/sdc2 to 13205248 (4k) blocks.
The filesystem on /dev/sdc2 is now 13205248 (4k) blocks long.
  1. Boot your Raspberry Pi and make basic initial setup. Check if you can see the third partition that you created above, and confirm that it is not mounted anywhere:
$ lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0    7:0    0  59.1M  1 loop /snap/core20/1826
loop1    7:1    0 109.6M  1 loop /snap/lxd/24326
loop2    7:2    0  43.2M  1 loop /snap/snapd/18363
loop3    7:3    0  59.1M  1 loop /snap/core20/1832
sda      8:0    0 111.8G  0 disk 
├─sda1   8:1    0   256M  0 part /boot/firmware
├─sda2   8:2    0 104.1G  0 part /
└─sda3   8:3    0   7.5G  0 part 
  1. You can now create an encrypted file system:
$ sudo cryptsetup luksFormat /dev/sda3

WARNING!
========
This will overwrite data on /dev/sda3 irrevocably.

Are you sure? (Type 'yes' in capital letters): YES
Enter passphrase for /dev/sda3: 
Verify passphrase: 
Ignoring bogus optimal-io size for data device (33553920 bytes).
  1. You can now open /dev/sda3, create filesystem on it and mount it:
$ sudo cryptsetup open /dev/sda3 myvault
Enter passphrase for /dev/sda3: 

$ sudo mkfs.ext4 /dev/mapper/myvault 
mke2fs 1.46.5 (30-Dec-2021)
Creating filesystem with 1949046 4k blocks and 487680 inodes
Filesystem UUID: 9e9183a9-5d51-4782-9990-d99eb48dfc87
Superblock backups stored on blocks: 
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632

Allocating group tables: done                            
Writing inode tables: done                            
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done 

$ sudo mount /dev/mapper/myvault /mnt
  1. You now have encrypted storage in /mnt. Check it with df -h:
$ df -h
Filesystem           Size  Used Avail Use% Mounted on
tmpfs                781M  3.1M  778M   1% /run
/dev/sda2            103G   18G   81G  18% /
tmpfs                3.9G  200K  3.9G   1% /dev/shm
tmpfs                5.0M     0  5.0M   0% /run/lock
/dev/sda1            253M  148M  105M  59% /boot/firmware
tmpfs                781M   80K  781M   1% /run/user/1001
/dev/mapper/myvault  7.3G   24K  6.9G   1% /mnt

Now you can clone this repository into a protected storage on your Raspberry Pi. This filesystem will not be autounsealed after reboot, and you will have to unseal it using password and mount it. After this, you just start the KMIP server container again with run-container.sh.

Disclaimer

Everything in this repository provided to you "AS IS". I am not affiliated with Synology or PyKMIP project. I do not take any responsibility for any lost data or security issues.

About

KMIP Server for Synology DSM

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Shell 92.8%
  • Dockerfile 7.2%