Skip to content

the code for my custom electric longboard (including custom ESC).

Notifications You must be signed in to change notification settings

thijses/longboard_2024

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

14 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Thijs LongBoard (TLB) firmware

This repo contains the code (compiled using platformIO) for my custom electric longboard. This thing is a 12-60V (3-13S LiPo) BLDC speed-controller (currently FOC focussed, but sensorless (BEMF) option is in development), as well as an ESP32-S3 for control & radio. The PCB is intended to be mounted inbetween the board and the truck (where most boards have a soft-plastic spacer)

The design of the PCB (that this code is intended to run on) can be found here:
https://oshwlab.com/s.t.van.liempd/tlb

I've produced (using JLCPCB assembly service) the 1st revision ('R01'), and am currently working on R02. Fair warning, because of the fancyness of the PCB and components (as compared to my previous projects), the PCB production is exactly cost-optimized (at 200~300$ for 5 assembled PCBs).

To mount the PCB between the board and truck, some 3D printed pieces are required. The design for these can be found here:
https://a360.co/4b4FQNT

I'm currently still testing the 1st revision PCB, progress can be found here:
https://docs.google.com/spreadsheets/d/1WjNS1LBmWm-569doQyxE5OfJIkMKA3vcxIIeLDl5snc/edit?usp=sharing

For the current state of the code, see the TODO list in main.cpp (which i may move to here).

About

the code for my custom electric longboard (including custom ESC).

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published