Skip to content
forked from peplin/pygatt

Python wrapper for gatttool (from BlueZ) and the BGAPI for accessing Bluetooth LE Devices

License

Notifications You must be signed in to change notification settings

thomafred/pygatt

 
 

Repository files navigation

pygatt - Python Module for Bluetooth LE Generic Attribute Profile (GATT).

This Module allows reading and writing to GATT descriptors on devices such as fitness trackers, sensors, and anything implementing standard GATT Descriptor behavior.

pygatt provides a Pythonic API by wrapping two different backends:

  • BlueZ (requires Linux), using the gatttool command-line utility.
  • Bluegiga's BGAPI, compatible with USB adapters like the BLED112.

Motivation

Despite the popularity of BLE, we have yet to find a good programming interface for it on desktop computers. Since most peripherals are designed to work with smartphones, this space is neglected. One interactive interface, BlueZ's gatttool, is functional but difficult to use programmatically. BlueZ itself obviously works, but the interface leaves something to be desired and only works in Linux.

Requirements

  • Python 2.7.5 or greater, or Python 3.5 or greater
    • Python 2.7.3's struct library has a bug that will break PyGATT - 2.7.5
      or greater is recommended.
  • BlueZ 5.18 or greater (with gatttool) - required for the gatttool backend only.
    • Tested on 5.18, 5.21, 5.35 and 5.43
  • GATTToolBackend requires Linux (i.e. not Windows compatible)

Installation

Install pygatt with pip from PyPI:

$ pip install pygatt

The BlueZ backend is not supported by default as it requires pexpect, which can only be installed in a UNIX-based environment. If you wish to use that backend, install the optional dependencies with:

$ pip install "pygatt[GATTTOOL]"

Install the latest development version of pygatt with pip:

$ pip install git+https://github.com/peplin/pygatt

Example Use

The primary API for users of this library is provided by pygatt.BLEBackend and pygatt.BLEDevice. After initializing an instance of the preferred backend (available implementations are found in pygatt.backends, use the BLEBackend.connect method to connect to a device and get an instance of BLEDevice.

import pygatt

# The BGAPI backend will attempt to auto-discover the serial device name of the
# attached BGAPI-compatible USB adapter.
adapter = pygatt.BGAPIBackend()

try:
    adapter.start()
    device = adapter.connect('01:23:45:67:89:ab')
    value = device.char_read("a1e8f5b1-696b-4e4c-87c6-69dfe0b0093b")
finally:
    adapter.stop()

Note that not all backends support connecting to more than 1 device at at time, so calling BLEBackend.connect again may terminate existing connections.

Here's the same example using the GATTTool backend. It's identical except for the initialization of the backend:

import pygatt

adapter = pygatt.GATTToolBackend()

try:
    adapter.start()
    device = adapter.connect('01:23:45:67:89:ab')
    value = device.char_read("a1e8f5b1-696b-4e4c-87c6-69dfe0b0093b")
finally:
    adapter.stop()

Notifications Example

This example uses the gatttool backend to connect to a device with a specific MAC address, subscribes for notifications on a characteristic, and prints the data returned in each notification.

import pygatt
from binascii import hexlify

adapter = pygatt.GATTToolBackend()

def handle_data(handle, value):
    """
    handle -- integer, characteristic read handle the data was received on
    value -- bytearray, the data returned in the notification
    """
    print("Received data: %s" % hexlify(value))

try:
    adapter.start()
    device = adapter.connect('01:23:45:67:89:ab')

    device.subscribe("a1e8f5b1-696b-4e4c-87c6-69dfe0b0093b",
                     callback=handle_data)
finally:
    adapter.stop()

Debugging

While debugging software using pygatt, it is often useful to see what's happening inside the library. You can enable debugging logging and have it printed to your terminal with this code:

import pygatt
import logging

logging.basicConfig()
logging.getLogger('pygatt').setLevel(logging.DEBUG)

Can't find BGAPI device in Windows

You may need to explicitly specify the COM port of your BGAPI-compatible device in windows, e.g.:

adapter = pygatt.BGAPIBackend(serial_port='COM9')

If you provide the COM port name, but still get an error such as WindowsError(2, 'The system cannot find the file specified.'), try changing the COM port of the device to a value under 10, e.g. COM9.

Authors

Releasing to PyPI

For the maintainers of the project, when you want to make a release:

  • Merge all of the changes into master.
  • Update the version in setup.py.
  • Update the CHANGELOG.mkd
  • Tag the commit and push to GitHub (will need to push to a separate branch of PR first since master is a protected branch).
  • Travis CI will take care of the rest - it will build and deploy tagged commits to PyPI automatically.

License

Copyright 2015 Stratos Inc. and Orion Labs

Apache License, Version 2.0 and MIT License. See LICENSE.

About

Python wrapper for gatttool (from BlueZ) and the BGAPI for accessing Bluetooth LE Devices

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 99.6%
  • Makefile 0.4%