warning: field `0` is never read --> src/register.rs:88:24 | 88 | pub struct Restriction(sys::io_uring_restriction); | ----------- ^^^^^^^^^^^^^^^^^^^^^^^^^ | | | field in this struct | = note: `#[warn(dead_code)]` on by default help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field | 88 | pub struct Restriction(()); | ~~

warning: lint `clippy::incorrect_clone_impl_on_copy_type` has been renamed to `clippy::non_canonical_clone_impl` --> src/sys/mod.rs:11:5 | 11 | clippy::incorrect_clone_impl_on_copy_type | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use the new name: `clippy::non_canonical_clone_impl` | = note: `#[warn(renamed_and_removed_lints)]` on by default

warning: field `0` is never read --> src/register.rs:88:24 | 88 | pub struct Restriction(sys::io_uring_restriction); | ----------- ^^^^^^^^^^^^^^^^^^^^^^^^^ | | | field in this struct | = note: `#[warn(dead_code)]` on by default help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field | 88 | pub struct Restriction(()); | ~~

warning: lint `clippy::incorrect_clone_impl_on_copy_type` has been renamed to `clippy::non_canonical_clone_impl` --> src/sys/mod.rs:11:5 | 11 | clippy::incorrect_clone_impl_on_copy_type | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use the new name: `clippy::non_canonical_clone_impl` | = note: `#[warn(renamed_and_removed_lints)]` on by default

warning: field `0` is never read --> src/register.rs:88:24 | 88 | pub struct Restriction(sys::io_uring_restriction); | ----------- ^^^^^^^^^^^^^^^^^^^^^^^^^ | | | field in this struct | = note: `#[warn(dead_code)]` on by default help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field | 88 | pub struct Restriction(()); | ~~

warning: lint `clippy::incorrect_clone_impl_on_copy_type` has been renamed to `clippy::non_canonical_clone_impl` --> src/sys/mod.rs:11:5 | 11 | clippy::incorrect_clone_impl_on_copy_type | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use the new name: `clippy::non_canonical_clone_impl` | = note: `#[warn(renamed_and_removed_lints)]` on by default

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

warning: field `0` is never read --> src/register.rs:88:24 | 88 | pub struct Restriction(sys::io_uring_restriction); | ----------- ^^^^^^^^^^^^^^^^^^^^^^^^^ | | | field in this struct | = note: `#[warn(dead_code)]` on by default help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field | 88 | pub struct Restriction(()); | ~~

warning: lint `clippy::incorrect_clone_impl_on_copy_type` has been renamed to `clippy::non_canonical_clone_impl` --> src/sys/mod.rs:11:5 | 11 | clippy::incorrect_clone_impl_on_copy_type | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use the new name: `clippy::non_canonical_clone_impl` | = note: `#[warn(renamed_and_removed_lints)]` on by default

warning: field `0` is never read --> src/register.rs:88:24 | 88 | pub struct Restriction(sys::io_uring_restriction); | ----------- ^^^^^^^^^^^^^^^^^^^^^^^^^ | | | field in this struct | = note: `#[warn(dead_code)]` on by default help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field | 88 | pub struct Restriction(()); | ~~

warning: lint `clippy::incorrect_clone_impl_on_copy_type` has been renamed to `clippy::non_canonical_clone_impl` --> src/sys/mod.rs:11:5 | 11 | clippy::incorrect_clone_impl_on_copy_type | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use the new name: `clippy::non_canonical_clone_impl` | = note: `#[warn(renamed_and_removed_lints)]` on by default

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

warning: unknown clippy lint: clippy::result_unit_err --> src/types.rs:397:13 | 397 | #[allow(clippy::result_unit_err)] | ^^^^^^^^^^^^^^^^^^^^^^^ help: did you mean: `clippy::result_map_unit_fn` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unknown_clippy_lints

warning: unknown clippy lint: clippy::incorrect_clone_impl_on_copy_type --> src/sys/mod.rs:11:5 | 11 | clippy::incorrect_clone_impl_on_copy_type | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = note: `#[warn(clippy::unknown_clippy_lints)]` on by default = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unknown_clippy_lints

warning: transmute from a reference to a reference --> src/sys/sys.rs:46:9 | 46 | ::core::mem::transmute(self) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `&mut *(self as *mut sys::__BindgenUnionField<T> as *mut T)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#transmute_ptr_to_ptr

warning: transmute from a reference to a reference --> src/sys/sys.rs:42:9 | 42 | ::core::mem::transmute(self) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `&*(self as *const sys::__BindgenUnionField<T> as *const T)` | = note: `#[warn(clippy::transmute_ptr_to_ptr)]` on by default = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#transmute_ptr_to_ptr

warning: unknown clippy lint: clippy::result_unit_err --> src/types.rs:397:13 | 397 | #[allow(clippy::result_unit_err)] | ^^^^^^^^^^^^^^^^^^^^^^^ help: did you mean: `clippy::result_map_unit_fn` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unknown_clippy_lints

warning: unknown clippy lint: clippy::incorrect_clone_impl_on_copy_type --> src/sys/mod.rs:11:5 | 11 | clippy::incorrect_clone_impl_on_copy_type | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = note: `#[warn(clippy::unknown_clippy_lints)]` on by default = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unknown_clippy_lints

warning: transmute from a reference to a reference --> src/sys/sys.rs:46:9 | 46 | ::core::mem::transmute(self) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `&mut *(self as *mut sys::__BindgenUnionField<T> as *mut T)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#transmute_ptr_to_ptr

warning: transmute from a reference to a reference --> src/sys/sys.rs:42:9 | 42 | ::core::mem::transmute(self) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `&*(self as *const sys::__BindgenUnionField<T> as *const T)` | = note: `#[warn(clippy::transmute_ptr_to_ptr)]` on by default = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#transmute_ptr_to_ptr

warning: unknown clippy lint: clippy::result_unit_err --> src/types.rs:397:13 | 397 | #[allow(clippy::result_unit_err)] | ^^^^^^^^^^^^^^^^^^^^^^^ help: did you mean: `clippy::result_map_unit_fn` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unknown_clippy_lints

warning: unknown clippy lint: clippy::incorrect_clone_impl_on_copy_type --> src/sys/mod.rs:11:5 | 11 | clippy::incorrect_clone_impl_on_copy_type | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = note: `#[warn(clippy::unknown_clippy_lints)]` on by default = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unknown_clippy_lints

warning: transmute from a reference to a reference --> src/sys/sys.rs:46:9 | 46 | ::core::mem::transmute(self) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `&mut *(self as *mut sys::__BindgenUnionField<T> as *mut T)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#transmute_ptr_to_ptr

warning: transmute from a reference to a reference --> src/sys/sys.rs:42:9 | 42 | ::core::mem::transmute(self) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `&*(self as *const sys::__BindgenUnionField<T> as *const T)` | = note: `#[warn(clippy::transmute_ptr_to_ptr)]` on by default = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#transmute_ptr_to_ptr

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

warning: unknown clippy lint: clippy::result_unit_err --> src/types.rs:397:13 | 397 | #[allow(clippy::result_unit_err)] | ^^^^^^^^^^^^^^^^^^^^^^^ help: did you mean: `clippy::result_map_unit_fn` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unknown_clippy_lints

warning: unknown clippy lint: clippy::incorrect_clone_impl_on_copy_type --> src/sys/mod.rs:11:5 | 11 | clippy::incorrect_clone_impl_on_copy_type | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = note: `#[warn(clippy::unknown_clippy_lints)]` on by default = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unknown_clippy_lints

warning: transmute from a reference to a reference --> src/sys/sys.rs:46:9 | 46 | ::core::mem::transmute(self) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `&mut *(self as *mut sys::__BindgenUnionField<T> as *mut T)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#transmute_ptr_to_ptr

warning: transmute from a reference to a reference --> src/sys/sys.rs:42:9 | 42 | ::core::mem::transmute(self) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `&*(self as *const sys::__BindgenUnionField<T> as *const T)` | = note: `#[warn(clippy::transmute_ptr_to_ptr)]` on by default = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#transmute_ptr_to_ptr

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/