A do-it-yourself thermal imager, compatible with the FLIR Lepton 2.5, 3.1R and 3.5 sensor with Arduino firmware

(REOS) Radar and Electro-Optical Simulation Framework written in C++.

(REOS) Radar and ElectroOptical Simulation Framework written in Fortran.

This project provides a Python library that enables communication with the Kamstrup Multical 402 heat meter. The configured parameters will be read from the meter at a certain interval and published in MQTT messages.

Official implementation of the paper "Maximizing Self-supervision from Thermal Image for Effective Self-supervised Learning of Depth and Ego-motion"

Raspberry Pi Thermal Camera in Real Time with MLX90640 and Python

Controlling Spotify with infrared technology, an Arduino Uno, and Python!

Decoding and saving carrier modulated IR signals and sending modulated IR signals using NRF52 SoCs

This is a project that aims to create an integrated system combined with mask recognition and infrared thermometer.

Infrared thermometer with a laser pointer built with an ESP8266 microcontroller and an MLX90614 sensor.

Control the FLIR A320 camera through Python

A 2-wheel drive car, controlled by a Raspberry Pi 4 running Robot Operating System (ROS1) Noetic, is used as a line following robot; it follows a black line against a white background, with the aid of a 5 channel infrared sensor.

An Arduino is used to balance a ball rolling on a beam. It uses an IR-Sensor for measurment and a PID-Controller controls the servo's output for lift.

IoT project where an Arduino controls an air conditioner through infrared, a Raspberry is a server controlling the Arduino, and an iOS app is given to the final user to remotely control the Raspberry (and therefore the Arduino)

Micropython module to communicate with Melexis MLX90621 16 x 4 Pixel Thermal Imager

The Density-Based Traffic Control System is designed to regulate the flow of vehicles at an intersection based on the density of traffic detected by infrared sensors. The system uses Arduino Uno as the microcontroller to control the traffic signal lights.

Arduino Code for integration of GSM module, ultrasonic sensor and infrared sensor to implement a Smart Refrigerator

Project on MCU STM32F051R8T6 with LCD12864B, IR-remote-control, Bluetooth module HC-05, speakers, 2048, snake and Tetris game

Catfeeder for 2 cats, different diet, works with RFID 134.2 KHz (Pet chip), ESP32

Repository of the Mini Sumo V1 Project