Releases: uweseimet/scsi2pi
Releases · uweseimet/scsi2pi
SCSI2Pi 3.4.2
The main changes in this version:
- s2pctl displays "????" instead of nothing for unknown device types.
- A minor issue when dealing with file operation errors has been fixed.
See the SCSI2Pi website for highly optimized 32/64 bit bullseye/bookworm binary packages.
SCSI2Pi 3.4.1
The main change in this version:
- A bug when reading CD images has been fixed (#92).
See the SCSI2Pi website for highly optimized 32/64 bit bullseye/bookworm binary packages.
SCSI2Pi 3.4
The main changes in this version:
- Code optimizations for the FULLSPEC board.
- The comparatively less performant legacy boards (aibom and gamernium) are no longer supported.
- Code quality improvements.
See the SCSI2Pi website for highly optimized 32/64 bit bullseye/bookworm binary packages.
SCSI2Pi 3.3
The main changes in this version:
- Building tailored optimized binaries with a selection of device types has been simplified.
- Various code optimizations.
SCSI2Pi 3.2
The main changes in this version:
- The current configuration can be saved as properties in /etc/s2p.conf with s2pctl or the SCSI Control App.
- SCSI and SASI devices can share the bus.
- Logging the bus signals with s2pexec and in_process_test, resp., is now optional.
- The binary sizes have been reduced even more (compared to PiSCSI by about 25%), which is especially important for small Pis (Zero/Zero 2). The less memory is used the more is available for the sector cache.
SCSI2Pi 3.1.1
The main change in this version:
- Minor bugfixes in the property evaluation/display.
SCSI2Pi 3.1
The main changes in this version:
- The automatic creation of the PiSCSI bridge for the DaynaPort emulation can be switched off.
- s2p automatically switches to a matching caching mode if the SCSI commands READ/WRITE LONG are used.
- Numerous optimizations and even more compact binaries.
SCSI2Pi 3.0.2
The main changes in this version:
- Further increased transfer rates, especially with small Pis. With a Pi Zero W the transfer rate is now about 25% higher than with PiSCSI.
SCSI2Pi 3.0.1
The main changes in this version:
- During the installation a configuration file /etc/s2p.conf is created, if not yet present. Edit this file where needed, and subsequently restart the SCSI2Pi system service.
- A bug in the language detection for error messages has been fixed.
SCSI2Pi 3.0
The main changes in this version:
- The programs installed with the binary packages or with sudo make install can be launched without sudo.
- The assignment of file extensions to device types is configurable.
- The SCSI level is configurable.
- As sector size any multiple of 4 is supported, which improves the compatibility with exotic platforms.
- The READ/WRITE LONG implementation has been extended and covers more use cases.
- s2p supports various caching modes.
- The DaynaPort emulation supports Wifi also with Bookworm.
- With the "-P" option s2pctl displays the current s2p settings. These can directly be used for a properties file like /etc/s2p.conf, making setting up a default configuration even easier.
- s2pexec supports an interactive mode and offers improved scripting capabilities.
- s2pexec accepts data for the DATA OUT phase on the command line.