Backtrace improvements for utilities

[asadsa92]

This PR adds a default back-trace to all asserts outside of varnishd, e.g., varnishstat.
Also add back-trace to varnishtest asserts.

Example (artificially crafted asserts):

---

Before:

Assert error in do_once_cb_first(), varnishstat.c line 164:
  Condition((0) != 0) not true.
Aborted

After:

Assert error in do_once_cb_first(), varnishstat.c line 164:
  Condition((0) != 0) not true.
Backtrace:
  ip=0x7f3458bb6125 sp=0x7fff606013e0 <VBT_format+0x15>
  ip=0x7f3458bb66eb sp=0x7fff60601400 <VBT_dump+0x6b>
  ip=0x7f3458bb5394 sp=0x7fff60601450 <vas_default+0x1b4>
  ip=0x7f3458bb51d3 sp=0x7fff606024c0 <VAS_Fail+0x63>
  ip=0x5614ef51548a sp=0x7fff60602500 <do_once_cb_first+0x3a>
  ip=0x7f3458b963d3 sp=0x7fff60602540 <vsc_iter_seg+0x1c3>
  ip=0x7f3458b957bb sp=0x7fff60602590 <VSC_Iter+0x34b>
  ip=0x5614ef51514e sp=0x7fff60602610 <do_once+0xde>
  ip=0x5614ef514a8d sp=0x7fff60602650 <main+0x5ed>
  ip=0x7f345887124a sp=0x7fff606026c0 <__libc_init_first+0x8a>
  ip=0x7f3458871305 sp=0x7fff60602760 <__libc_start_main+0x85>
  ip=0x5614ef5143d1 sp=0x7fff606027b0 <_start+0x21>
Aborted

---

Before:

*    top   RESETTING after bin/varnishtest/tests/p00000.vtc
**** dT    0.472
**   s1    Waiting for server (5/-1)
**   v1    Wait
**** dT    0.474
---- v1    Assert error in varnish_ask_cli(), vtc_varnish.c line 110:  Condition((0) != 0) not true.  Errno=0 Success
*    top   failure during reset
#    top  TEST bin/varnishtest/tests/p00000.vtc FAILED (0.474) exit=2

After

*    top   RESETTING after bin/varnishtest/tests/p00000.vtc
**** dT    0.472
**   s1    Waiting for server (5/-1)
**   v1    Wait
**** dT    0.474
---- v1    Assert error in varnish_ask_cli(), vtc_varnish.c line 110:  Condition((0) != 0) not true.  Errno=0 Success
Backtrace:
  ip=0x55f0c01f3845 sp=0x7ffd49fc2480 <VBT_format+0x15>
  ip=0x55f0c01f3e0b sp=0x7ffd49fc24a0 <VBT_dump+0x6b>
  ip=0x55f0c01d453f sp=0x7ffd49fc24f0 <vtc_log_VAS_Fail+0x4f>
  ip=0x7fec618c41bb sp=0x7ffd49fc35c0 <VAS_Fail+0x4b>
  ip=0x55f0c01f043e sp=0x7ffd49fc3600 <varnish_ask_cli+0x3e>
  ip=0x55f0c01ee07d sp=0x7ffd49fc3640 <varnish_wait+0x7d>
  ip=0x55f0c01ed132 sp=0x7ffd49fc3660 <cmd_varnish+0x72>
  ip=0x55f0c01b0ddb sp=0x7ffd49fc36d0 <reset_cmds+0x2b>
  ip=0x55f0c01b0d13 sp=0x7ffd49fc36f0 <fail_out+0xa3>
  ip=0x55f0c01d38df sp=0x7ffd49fc3710 <vtc_logfail+0x3f>
  ip=0x55f0c01d3548 sp=0x7ffd49fc3720 <vtc_fatal+0x278>
  ip=0x55f0c01d4707 sp=0x7ffd49fc3830 <vtc_log_VAS_Fail+0x217>
  ip=0x7fec618c41bb sp=0x7ffd49fc4900 <VAS_Fail+0x4b>
  ip=0x55f0c01f043e sp=0x7ffd49fc4940 <varnish_ask_cli+0x3e>
  ip=0x55f0c01f1460 sp=0x7ffd49fc4980 <varnish_launch+0x1020>
  ip=0x55f0c01efcaa sp=0x7ffd49fc5aa0 <varnish_vclbackend+0xaa>
  ip=0x55f0c01ede7f sp=0x7ffd49fc5b00 <cmd_varnish+0xdbf>
  ip=0x55f0c01b0c43 sp=0x7ffd49fc5b70 <parse_string+0xc43>
  ip=0x55f0c01b12c3 sp=0x7ffd49fc6870 <exec_file+0x4c3>
  ip=0x55f0c01dbc01 sp=0x7ffd49fc68d0 <start_test+0x671>
  ip=0x55f0c01d9ebb sp=0x7ffd49fc7940 <main+0x70b>
  ip=0x7fec6151a24a sp=0x7ffd49fc89b0 <__libc_init_first+0x8a>
  ip=0x7fec6151a305 sp=0x7ffd49fc8a50 <__libc_start_main+0x85>
  ip=0x55f0c01a8eb1 sp=0x7ffd49fc8aa0 <_start+0x21>


*    top   failure during reset
#    top  TEST bin/varnishtest/tests/p00000.vtc FAILED (0.474) exit=2

[dridi]

The second patch is easier to review with the --ignore-all-space option (or ?w=1 query string on github).

[dridi]

bugwash: we should enable back-traces outside of varnishd with some kind of developer mode set in varnishd and exposed to VSM readers with a new Arg segment or something similar.

The developer mode should always be assumed by varnishtest (which is much more than a VSM reader) and as an intermediate measure this could be enabled at configure time and always enabled by autogen.des.

[asadsa92]

Bumping this. I assume this can be merged after a rebase?
@dridi I also assume you meant "developer mode" in varnishd can be done later?

[dridi]

I think @bsdphk insisted that we do not make this the default, that it should be controlled in varnishd but we could fall back to a configure-time option (eg. --enable-vut-bt) until we introduce this developer mode.

So I don't think it was acceptable as-is.

[nigoroll]

@bsdphk @dridi I do not understand what the point would be about not printing the backtrace. Why would we need VSM complications just to not enable printing it?

[dridi]

I don't remember why @bsdphk didn't want VUTs to give a back-trace by default and only add them to varnishtest. I hate to agree with @gquintard [1] but in the VUT case it might be better to make back-traces opt-in or opt-out with environment variables.

[1] random shot fired

[nigoroll]

in the VUT case it might be better to make back-traces opt-in or opt-out with environment variables.

I agree with "if configurable, then through environment variables".

But my question remains what the worry is about having backtraces.

Thinking about it I realize that being able to turn the abort handler off has in fact been helpful in the past (I am having trouble though remembering exactly why, but it had something to do with getting a proper backtrace in a debugger (might have been on Solaris?) for just the abort from a SIGSEGV and not if the handler was active). So I think that would be more important than just turning the backtrace off.

[nigoroll]

bugwash: send to syslog (suggested by phk), enable always