-
Notifications
You must be signed in to change notification settings - Fork 12
Gallery
Three of a kind...
d.ti created the fantastic ESP32 based PCB Rev 1.2 for the SSD1322 OLED
Info: ESP32 Wroom 32D MCU, Micro USB Socket at back side, SPI and I2C Sockets for your own Projects.
You can add: MIC184 Temperature Sensor, Buzzer, WS2812 LED and a Tilt Switch.
Links to the free Rev 1.2 Project files:
KiCad Project /
Gerber Files /
BOM /
Schematics /
3D Model
rbz's Couch-Case π
rbz is the creator of the great i2c2oled and tty2oled picture viewer.
stefer09 new enclosure.
d.ti created an absolute fantastic ESP32 based PCB and a matching Case for an 3.12" OLED.
Some Infos: ESP32 Wroom 32D MCU, USB Socket at back side, MIC184 Temperature Sensor (if added), SPI and I2C Sockets for your own Projects.
Links to the free Rev1.1 Project files:
KiCad Project /
Gerber Files /
BOM /
Schematics /
Case /
Assembly Instructions
jawler's build. Little Bigger than mine π.
d.ti uses his own Case and PCB (KiCad & Gerber) for an 2.8" Display
He sent me an printed Case and a PCB which I use with my test system. Many Thx π!
stefer09 uses an 20 Pin OLED from Newhaven with an ESP8266.
The Display Connection Mode (SPI/Parallel) can be changed via Display Pins instead of re-solder tiny resistors.
See Electrical for his connection Scheme.
Mellified's Devkitc V4 solderless & breakout solution.
His MiSTer_SAM Tool supports tty2oled.
Reg's Checkmate 1500 build
WiteWulf got it soldered and working in less than an hour
RealLarry's external Set-Top Case for an 3.12" OLED, see Cases
RealLarry's testing of a 5.5" OLED with GreyScale picture
gojira54 uses the TTGO-T8 PCB
dave18's case with an 128x64 Pixel OLED
Jukk@M's digibox (HDTHUNDER HD5521SR)
My Final?
Testing Hardware (ESP32 Wemos Lolin32, ext. Adafruit SD-Breakout, 3.12" SSD1322)
Hope for some more Pics here.
πΎ πΎ
ποΈ >>Start here<<
π₯ MiSTer Installation & Update π₯
β History (Updates & Notes)
π§ Realizing / How does it work
π Electrical / PCB's / Tested Hardware
βοΈ Arduino HowTo for Windows
π Arduino IDE Settings
π‘ OTA (Wireless) Arduino Update
π¬ CMD Mode (Greyscale/Adafruit GFX)
π¬ Old CMD Mode (Monochrome/U8G2)
πΌοΈ Build Greyscale Pictures (GSC)
π¨ Testing / Troubleshooting
π Files and Folders in this Repository
πΌοΈ Gallery
π― Cardware
π Credits and Links