DOCS-1720: Include digital interrupts config and control

static/include/components/board/board-digital-interrupts.md

@@ -4,9 +4,17 @@ Configuring digital interrupts to monitor GPIO pins on your board is useful when
 - When an interrupt configured on your board processes a change in the state of the GPIO pin it is configured to monitor, it calls [`Tick()`](/components/board/#tick) to record the state change and notify any interested [callbacks](/components/board/#addcallback) to "interrupt" the program.
 - Calling [`GetGPIO()`](/components/board/#getgpio) on a GPIO pin, which you can do without configuring interrupts, is useful when you want to know a pin's value at specific points in your program, but is less precise and convenient than using an interrupt.
 
-Integrate `digital_interrupts` into your machine in the `attributes` of your board by adding the following to your board's JSON configuration:
+Integrate `digital_interrupts` into your machine in the `attributes` of your board by following the **Config Builder** instructions, or by adding the following to your board's JSON configuration:
 
 {{< tabs name="Configure a Digital Interrupt" >}}
+{{% tab name="Config Builder" %}}
+
+On your boards panel, click **Show more**, then select **Add digital interrupt**.
+Assign a name to your digital interrupt and then enter a pin number.
+
+![An example configuration for digital interrupts in the Viam app Config Builder.](/components/board/digital-interrupts-ui-config.png)
+
+{{% /tab %}}
 {{% tab name="JSON Template" %}}
 
 ```json {class="line-numbers linkable-line-numbers"}
@@ -57,3 +65,10 @@ The following properties are available for `digital_interrupts`:
 |`name` | string | **Required** | Your name for the digital interrupt. |
 |`pin`| string | **Required** | The {{< glossary_tooltip term_id="pin-number" text="pin number" >}} of the board's GPIO pin that you wish to configure the digital interrupt for. |
 |`type`| string | Optional | _Only applies to `pi` model boards._ <ul><li>`basic`: Recommended. Tracks interrupt count. </li> <li>`servo`: For interrupts configured for a pin controlling a [servo](/components/servo/). Tracks pulse width value. </li></ul> |
+
+#### Test `digital interrupts`
+
+Once you have configured your digital interrupts, navigate to the **Control** tab to monitor interrupt activity.
+The value displayed next to each interrupt name represent the total count of interrupts triggered by the corresponding digital interrupt.
+
+![Digital interrupts in the control tab.](/components/board/digital-interrupts-control-tab.png)