Support for PHP 8.3

install

@@ -10,6 +10,7 @@ apt-get -qq install php7.4-xdebug
 apt-get -qq install php8.0-xdebug
 apt-get -qq install php8.1-xdebug
 apt-get -qq install php8.2-xdebug
+apt-get -qq install php8.3-xdebug
 
 # Copy PHP profiles to PHP Xdebug versions
 mkdir /etc/php/7.4xdbg
@@ -32,12 +33,18 @@ rsync -al /etc/php/8.2/ /etc/php/8.2xdbg
 rm -rf /etc/php/8.2xdbg/fpm/pool.d
 ./link_rename.sh /etc/php/8.2xdbg/fpm/conf.d /etc/php/8.2/ /etc/php/8.2xdbg/
 ln -s /etc/php/8.2xdbg/mods-available/xdebug.ini /etc/php/8.2xdbg/fpm/conf.d/20-xdebug.ini
+mkdir /etc/php/8.3xdbg
+rsync -al /etc/php/8.3/ /etc/php/8.3xdbg
+rm -rf /etc/php/8.3xdbg/fpm/pool.d
+./link_rename.sh /etc/php/8.3xdbg/fpm/conf.d /etc/php/8.3/ /etc/php/8.3xdbg/
+ln -s /etc/php/8.3xdbg/mods-available/xdebug.ini /etc/php/8.3xdbg/fpm/conf.d/20-xdebug.ini
 
 # Remove xdebug from plain PHP versions
 rm -f /etc/php/7.4/fpm/conf.d/20-xdebug.ini
 rm -f /etc/php/8.0/fpm/conf.d/20-xdebug.ini
 rm -f /etc/php/8.1/fpm/conf.d/20-xdebug.ini
 rm -f /etc/php/8.2/fpm/conf.d/20-xdebug.ini
+rm -f /etc/php/8.3/fpm/conf.d/20-xdebug.ini
 rsync -r ./src/etc/php/ /etc/php/
 rsync -r ./src/etc/init.d/ /etc/init.d/
 rsync -r ./src/lib/systemd/system/ /lib/systemd/system/
@@ -47,12 +54,14 @@ chmod +x /etc/init.d/php7.4xdbg-fpm
 chmod +x /etc/init.d/php8.0xdbg-fpm
 chmod +x /etc/init.d/php8.1xdbg-fpm
 chmod +x /etc/init.d/php8.2xdbg-fpm
+chmod +x /etc/init.d/php8.3xdbg-fpm
 
 # Add to auto start
 systemctl enable php7.4xdbg-fpm
 systemctl enable php8.0xdbg-fpm
 systemctl enable php8.1xdbg-fpm
 systemctl enable php8.2xdbg-fpm
+systemctl enable php8.3xdbg-fpm
 
 
 ############################################

src/etc/init.d/php8-3xdbg-fpm

@@ -0,0 +1,162 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          php8.3xdbg-fpm
+# Required-Start:    $remote_fs $network
+# Required-Stop:     $remote_fs $network
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: starts php8.3xdbg-fpm
+# Description:       Starts The PHP Xdebug FastCGI Process Manager Daemon
+### END INIT INFO
+
+# Author: Stephen J. Carnam <[email protected]>
+export PHPRC=/etc/php/8.3xdbg/fpm
+export PHP_INI_SCAN_DIR=/etc/php/8.3xdbg/fpm/conf.d
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC="PHP 8.3 Xdebug FastCGI Process Manager"
+NAME=php-fpm8.3
+CONFFILE=/etc/php/8.3xdbg/fpm/php-fpm.conf
+DAEMON=/usr/sbin/$NAME
+DAEMON_ARGS="--daemonize --fpm-config $CONFFILE"
+CONF_PIDFILE=$(sed -n 's/^pid[ =]*//p' $CONFFILE)
+PIDFILE=${CONF_PIDFILE:-/run/php/php8.3xdbg-fpm.pid}
+TIMEOUT=30
+SCRIPTNAME=/etc/init.d/$NAME
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+		$DAEMON_ARGS 2>/dev/null \
+		|| return 2
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=QUIT/$TIMEOUT/TERM/5/KILL/5 --pidfile $PIDFILE --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/TERM/5/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	# Many daemons don't delete their pidfiles when they exit.
+	rm -f $PIDFILE
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal USR2 --quiet --pidfile $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+    start)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+	systemd-tmpfiles --remove --create /usr/lib/tmpfiles.d/php8.3xdbg-fpm.conf
+	case "$?" in
+	    0)
+		do_start
+		case "$?" in
+		    0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		    2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+		esac
+		;;
+	    1) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+    stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+    status)
+        status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+        ;;
+    reload|force-reload)
+	log_daemon_msg "Reloading $DESC" "$NAME"
+	do_reload
+	log_end_msg $?
+	;;
+    reopen-logs)
+	log_daemon_msg "Reopening $DESC logs" $NAME
+	if start-stop-daemon --stop --signal USR1 --oknodo --quiet \
+	    --pidfile $PIDFILE --exec $DAEMON
+	then
+	    log_end_msg 0
+	else
+	    log_end_msg 1
+	fi
+	;;
+    restart)
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+		# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+    *)
+	echo "Usage: $SCRIPTNAME {start|stop|status|restart|reload|force-reload}" >&2
+	exit 1
+    ;;
+esac
+
+:

src/etc/php/8-3xdbg/fpm/php-fpm.conf

@@ -0,0 +1,145 @@
+;;;;;;;;;;;;;;;;;;;;;
+; FPM Configuration ;
+;;;;;;;;;;;;;;;;;;;;;
+
+; All relative paths in this configuration file are relative to PHP's install
+; prefix (/usr). This prefix can be dynamically changed by using the
+; '-p' argument from the command line.
+
+;;;;;;;;;;;;;;;;;;
+; Global Options ;
+;;;;;;;;;;;;;;;;;;
+
+[global]
+; Pid file
+; Note: the default prefix is /var
+; Default Value: none
+; Warning: if you change the value here, you need to modify systemd
+; service PIDFile= setting to match the value here.
+pid = /run/php/php8.3xdbg-fpm.pid
+
+; Error log file
+; If it's set to "syslog", log is sent to syslogd instead of being written
+; into a local file.
+; Note: the default prefix is /var
+; Default Value: log/php-fpm.log
+error_log = /var/log/php8.3xdbg-fpm.log
+
+; syslog_facility is used to specify what type of program is logging the
+; message. This lets syslogd specify that messages from different facilities
+; will be handled differently.
+; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
+; Default Value: daemon
+;syslog.facility = daemon
+
+; syslog_ident is prepended to every message. If you have multiple FPM
+; instances running on the same server, you can change the default value
+; which must suit common needs.
+; Default Value: php-fpm
+;syslog.ident = php$8.3-fpm
+
+; Log level
+; Possible Values: alert, error, warning, notice, debug
+; Default Value: notice
+log_level = error
+
+; Log limit on number of characters in the single line (log entry). If the
+; line is over the limit, it is wrapped on multiple lines. The limit is for
+; all logged characters including message prefix and suffix if present. However
+; the new line character does not count into it as it is present only when
+; logging to a file descriptor. It means the new line character is not present
+; when logging to syslog.
+; Default Value: 1024
+;log_limit = 4096
+
+; Log buffering specifies if the log line is buffered which means that the
+; line is written in a single write operation. If the value is false, then the
+; data is written directly into the file descriptor. It is an experimental
+; option that can potentially improve logging performance and memory usage
+; for some heavy logging scenarios. This option is ignored if logging to syslog
+; as it has to be always buffered.
+; Default value: yes
+;log_buffering = no
+
+; If this number of child processes exit with SIGSEGV or SIGBUS within the time
+; interval set by emergency_restart_interval then FPM will restart. A value
+; of '0' means 'Off'.
+; Default Value: 0
+emergency_restart_threshold = 10
+
+; Interval of time used by emergency_restart_interval to determine when
+; a graceful restart will be initiated.  This can be useful to work around
+; accidental corruptions in an accelerator's shared memory.
+; Available Units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+emergency_restart_interval = 60s
+
+; Time limit for child processes to wait for a reaction on signals from master.
+; Available units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+process_control_timeout = 10s
+
+; The maximum number of processes FPM will fork. This has been designed to control
+; the global number of processes when using dynamic PM within a lot of pools.
+; Use it with caution.
+; Note: A value of 0 indicates no limit
+; Default Value: 0
+; process.max = 128
+
+; Specify the nice(2) priority to apply to the master process (only if set)
+; The value can vary from -19 (highest priority) to 20 (lowest priority)
+; Note: - It will only work if the FPM master process is launched as root
+;       - The pool process will inherit the master process priority
+;         unless specified otherwise
+; Default Value: no set
+; process.priority = -19
+
+; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
+; Default Value: yes
+;daemonize = yes
+
+; Set open file descriptor rlimit for the master process.
+; Default Value: system defined value
+;rlimit_files = 1024
+
+; Set max core size rlimit for the master process.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+
+; Specify the event mechanism FPM will use. The following is available:
+; - select     (any POSIX os)
+; - poll       (any POSIX os)
+; - epoll      (linux >= 2.5.44)
+; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
+; - /dev/poll  (Solaris >= 7)
+; - port       (Solaris >= 10)
+; Default Value: not set (auto detection)
+events.mechanism = epoll
+
+; When FPM is built with systemd integration, specify the interval,
+; in seconds, between health report notification to systemd.
+; Set to 0 to disable.
+; Available Units: s(econds), m(inutes), h(ours)
+; Default Unit: seconds
+; Default value: 10
+;systemd_interval = 10
+
+;;;;;;;;;;;;;;;;;;;;
+; Pool Definitions ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Multiple pools of child processes may be started with different listening
+; ports and different management options.  The name of the pool will be
+; used in logs and stats. There is no limitation on the number of pools which
+; FPM can handle. Your system will tell you anyway :)
+
+; Include one or more files. If glob(3) exists, it is used to include a bunch of
+; files from a glob(3) pattern. This directive can be used everywhere in the
+; file.
+; Relative path can also be used. They will be prefixed by:
+;  - the global prefix if it's been set (-p argument)
+;  - /usr otherwise
+include=/etc/php/8.3xdbg/fpm/pool.d/*.conf

src/etc/php/8-3xdbg/fpm/pool.d/dummy.conf

@@ -0,0 +1,13 @@
+; origin-src: deb/php-fpm/dummy.conf
+
+[www]
+listen = 127.0.0.1:9683
+listen.allowed_clients = 127.0.0.1
+
+user = www-data
+group = www-data
+
+pm = ondemand
+pm.max_children = 4
+pm.max_requests = 4000
+pm.process_idle_timeout = 10s

src/etc/php/8-3xdbg/mods-available/xdebug.ini

@@ -0,0 +1,4 @@
+zend_extension=xdebug.so
+xdebug.start_with_request=yes
+xdebug.mode=debug
+xdebug.client_host=localhost

src/lib/systemd/system/php8.3xdbg-fpm.service

@@ -0,0 +1,16 @@
+[Unit]
+Description=The PHP 8.3 Xdebug FastCGI Process Manager
+Documentation=man:php-fpm8.3(8)
+After=network.target
+
+[Service]
+Type=notify
+Environment=PHPRC=/etc/php/8.3xdbg/fpm
+Environment=PHP_INI_SCAN_DIR=/etc/php/8.3xdbg/fpm/conf.d
+ExecStart=/usr/sbin/php-fpm8.3 --nodaemonize --fpm-config /etc/php/8.3xdbg/fpm/php-fpm.conf
+ExecStartPost=-/usr/lib/php/php-fpm-socket-helper install /run/php/php-fpm.sock /etc/php/8.3xdbg/fpm/pool.d/www.conf 83
+ExecStopPost=-/usr/lib/php/php-fpm-socket-helper remove /run/php/php-fpm.sock /etc/php/8.3xdbg/fpm/pool.d/www.conf 83
+ExecReload=/bin/kill -USR2 $MAINPID
+
+[Install]
+WantedBy=multi-user.target